RC Lights RCL106 6 LED Lights System For Rpm Roof Canisters (3mm, 14)

Key Features

Overview

This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights!

Use RCL106 to add 6 3mm white LED lights to RPM Roof Canisters with 4 extra constant LED channels for adding accessory lights (RPM Front Bumper Canisters, RPM Tail Light Canisters).

Compatible with RPM Roof-Mounted Light Bar Set RPM80922, RPM80923 & RPM80925 --Direct fit for Slash 4x4, Slash & SC10.

Power directly from the RX or optional battery source.

To change LED sizes or colors use 5mm or 3mm LEDs.

Everything needed for a complete installation is included with every lighting system!

Includes:
Instruction Set -
(1) standard 10 LED controller  RCL5051
(1) RX plug                             RCL5073
(6) 14" wire extensions            RCL539014
(6) 3mm white LEDs                RCL5280W
(6) 2P connector housings - 
(2) zip ties & bases                 RCL5080

Specs:
SYSTEM CURRENT DRAW (@6V): 110mA
(A standard servo draws approx. 350mA)

LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.

*DO NOT look directly into beam.