RC Lights Dual Head & Electronic Brake Led Lights (5mm, 14) : 1:12 to 1:8 Trucks

Key Features

Overview

Use RCL5006 to install 4 white dual headlights and 2 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car. No extra channels, with included microBRAKE™ - 6 LED controller. This controller has EBS functionality built right in for a streamlined installation on the most common setup for R/C cars & trucks.

Powered directly from the RX throttle channel using the included RX Pass-Thru™.

To change headlight or tail light colors use 5mm or 3mm LEDs.
Everything needed for a complete installation is included with every lighting system!

NOTE: microBRAKE™ 6 LED Controller is not compatible with the Remote Power Switch (RCL5090).

INCLUDES:
Instruction Set -
(1) microBRAKE™ 6 LED controller       RCL5052 
(1) RX Pass-Thru™ w/ 3P power plug   RCL5074
(6) 14" wire extensions                       RCL539014
(4) 5mm white headlights                    RCL5290W
(2) 5mm red tail lights                        RCL5290R
(6) standard 5mm LED holders            RCL5082
(6) 2P connector housings -
(1) 3.75"x3" aluminum tape                RCL5080
(6) zip ties & bases

Specs:
SYSTEM CURRENT DRAW (@6V): 90mA with brake lights dim; 120mA with all LEDs fully bright
(A standard servo draws approx. 350mA)

LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA
DIMENSIONS: 1.3" x 0.6" x 0.3"

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA