Revolectrix
Revolectrix DCIR-US DC IR battery meter "The Honesty Meter"
(No reviews yet)
Write a Review
- SKU:
- DCIR-US
- Condition:
- New
Description
Revolectrix IR Meter
Base Part Number: DCIR
OVERVIEW
Finally, a full-scale-production IR meter, readily available from a trusted source at an affordable price! The Revolectrix IR Meter is capable of instantaneously displaying Pack Voltage down to the cell level as well as Pack DC internal resistance (DCIR) and the individual cell DC IR for any Li chemistry battery pack within a nominal DC voltage range between 7.40V and 26.10V. The Revolectrix IR Meter utilizes true Kelvin 4-wire current sensing and may be considered a laboratory-quality instrument due to its unparalleled accuracy when compared to other competing R/C brands.
View AllClose
Base Part Number: DCIR
OVERVIEW
Finally, a full-scale-production IR meter, readily available from a trusted source at an affordable price! The Revolectrix IR Meter is capable of instantaneously displaying Pack Voltage down to the cell level as well as Pack DC internal resistance (DCIR) and the individual cell DC IR for any Li chemistry battery pack within a nominal DC voltage range between 7.40V and 26.10V. The Revolectrix IR Meter utilizes true Kelvin 4-wire current sensing and may be considered a laboratory-quality instrument due to its unparalleled accuracy when compared to other competing R/C brands.
- LCD: 2.6", 128 x 64 pixels graphic LCD with white LED backlight
- Mains connector: XT60
- Balance connector: Modified JST XH series, 7 position max; accepts 2s-8s balance plugs on batteries
- Input protection: 10A fused
- Simple, intuitive, single momentary push button user interface
- Just connect a battery and toggle through various screens to verify the state-of-charge and health of any Li chemistry battery pack
- No need to configure or select presets; just plug and go!
- Always know the voltage of a pack down to the individual cell level before taking to the air!
- See instantaneous and highly accurate DC IR for every cell; the best indicator of pack health
- Know when it's time to retire a pack by watching for, and logging trends in IR over time
- For Battery types: LiPo (2s to 6s) / LiPo HV (2s to 6s) / LiFePO4 (3s to 6s)
Battery Input Voltage: 7.40V to 26.10V
Cell internal resistance: < 250 mohm
Pack internal resistance: < 1 ohm
Input protection: 10A Fused
Mains connector: XT60
Balance connector: Modified JST XH series, 7 position max; accepts 2s-8s balance plugs on batteries
User Interface: Single, momentary, tactile push button switch
LCD: 2.6", 128 x 64 pixels graphic LCD with white LED backlight
Size: 95mm x 56mm x 26mm
Related Products
Related Products
Sold Out
DCC Concepts Alpha Digital Meter for DC or DCC
DCCconcepts
$74.99
A highly accurate digital meter for use on DC or DCC layouts. Simple to install and easy to understand. DCD-AVA.1A perfect match for Alpha Panel so you layout fascia will look great!Alpha Meter’s...
DCD-AVA.1
Sold Out
DCC Concepts DCD-MW2.10 Alpha Mimic Extension Wire – 10 Meters
DCC Concepts
$5.99
Alpha Mimic Extension Wire – 10 Meters. An alternative to extension leads for those who like to solder.10 Meters of fine twinned wire. Supplied with red and black heat-shrink.
DCD-MW2.10
Sold Out
DCC Concepts DCD-ME6.1M Alpha Mimic Extension Leads – 6x 1 Meter
DCC Concepts
$9.99
Alpha Mimic Extension Leads – 6x 1 Meter1meter extension leads for Alpha Mimic LEDs and Ground Signals.
DCD-ME6.1M
Dynamite DYN4403 Passport GPS Speed Meter 2.0
Dynamite
$109.99
Key FeaturesTrack: Location, speed, altitude and much moreCompatible with RC planes, helis, cars, trucks and boatsCompact, Lightweight size allows for an easy fit in most RC applicationBuilt-in...
DYN4403
