RC LIGHTS RCL5054 Turnbrake 14 LED Controller

• Full-function LED controller with headlight strobe, turn signal, and dual-intensity electronic brake light action built right in
• Power directly from the RX or optional power source

The central point of every LED lighting system is the LED controller. It is this component that is going to appropriately power the LEDs so they do not get too much power and blow. It also separates the LEDs into independently controllable groups to which specific functionality can be assigned. It is the brain that tells the LEDs how and when to light.

Directly power up to 14 LEDs. Current limiting resistors are built right in.  Using the TURNBRAKE™ 14 LED Controller, LEDs can be directly powered from the throttle channel of the RX using the included RX Pass-Thru™ (mini Y-harness). A second RX Pass-Thru™ is included for linking with the RX steering channel.  Dual intensity brake light action is built right in! Throttle channel input fully reversible.  Fully-adjustable rate turn signals for Right and Left turn indication. Steering channel input fully reversible.  LEDs are split into seven banks: 2 constant fog; 4 constant/strobing headlights (2 each side R & L; headlight strobe rate fully-adjustable); 4 adjustable rate turn signals (2 each side R & L; front and back); and 4 switched dim or full bright depending on throttle stick position (GAS or BRAKE.)   Throttle and steering center-stick auto-detect for precise lighting effects every time. 

Full-feature functionality built right in: constant fog lights, strobing headlights, active turn signals, and dual intensity brake lights for the ultimate in scale lighting effects for any 1:10 to 1:8 scale body. 

*NOTE: TURNBRAKE™ 14 LED Controller is not compatible with the Remote Power Switch (RCL5090).

Specs:
DIMENSIONS: 1.65" x 1.0" x 0.25" 

INPUT VOLTAGE: 3.6-7.4V [6V Optimal]