RC Lights Electronic Brake Led Lights Red (3mm, 14) : 1:12 to 1:8 RC Car/Truck

Key Features

Overview

This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights!

Use RCL5422E to add 2 3mm red LED lights to RPM Tail Light Canisters.

OR

Use RCL5422E to install 2 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car or truck with 1 extra constant LED channels for adding an additional brake light.

EBS switch is included for dual-intensity brake light action, just like a real car.

Compatible with RPM Tail Light Set RPM81030 --Direct fit for Slash & SC10 Bumpers.

To change tail lights to be 5mm in size use 5mm LEDs.

Everything needed for a complete installation is included with every lighting system!

Includes:
Instruction Set -
(1) RX Direct2LED™                 RCL5075 
(1) electronic brake switch        RCL5092 
(2) 14" wire extensions             RCL539014
(2) 3mm red tail lights              RCL5280R 
(2) standard 3mm LED holders  RCL50823
(2) 2P connector housings -
(1) 3.75"x3" aluminum tape      RCL5080
(4) zip ties & bases

Specs:
SYSTEM CURRENT DRAW (@6V): 55mA
(A standard servo draws approx. 350mA)

RX Direct2LED™
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA

Electronic Brake Switch
INPUT VOLTAGE: 4.8-6.0V
MAX OUTPUT CURRENT: 1.2A

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.

*DO NOT look directly into beam.