Hitec HS-5805MG Digital Metal Gear Mega Giant Scale Servo HS5805MG / HS5805

FEATURES: For .60 class or larger aircraft, 1/4 scale car steering or throttle
            and gasoline powered boats
          Programmable digital amplifier with MOSFET drive
          Four metal gears with resin first gear
          Dual ball bearings
          Heavy duty horns and hardware
          Water and dust tight

INCLUDES: Hitec HS-5805 Mega Scale Servo with S Connector
          Mega Horn and Hardware set
          Y-Harness
          Instruction Sheet

SPECS:    Operating Speed: 0.19sec/60° @ 4.8V
                           0.14sec/60° @ 6.0V
          Output Torque: 19.8kg cm (275oz-in) @ 4.8V
                         24.7kg cm (343oz in) @ 6.0V
          Power Consumption: 800mA unloaded
          Size: 2.59 x 1.18 x 2.26" (66 x 30 x 57.6mm)
          Weight: 6.95oz (197g)
          Length of Four Point Horn: 2.4" (61mm) at longest point
          Length of Single Arm: 1.8" (47mm) from center of hole to end
          Diameter of Round Horn: 1.6" (39.8mm)
          Thickness of Horns: 0.20" (5mm)

COMMENTS: Due to the high power consumption of the servo, a NiCd or NiMH
            battery with at least 1200mAh (preferably 5-cells and 6V) must be
            used.
          Also, with a BEC equipped receiver the power should be fed directly
            to the servo without going through the BEC regulator. A Y-harness
            and instructions are provided with servo.