Blitz / Firestorm

Use with FLUX MMH-4000KV brushless motor Upgrade your brushless speed controller to the latest tech from HPI! The all-new Flux EMH-3S electronic speed controller is just as adjustable as the Flux Reload V2 it replaces, but it's more powerful and more...

This is the Pro-Line PrePainted Pre-Cut Flo-Tek Fusion Short Course Truck Body. FEATURES Fits; Traxxas Slash and Slash 4x4 Associated SC5M, SC10.2 HPI Blitz Pro-Line PRO-2 SC Losi 22SCT, and TEN-SCTE...

This is the Pro-Line Flo-Tek Fusion Clear Precut Short Course Truck Body. FEATURES Fits; Traxxas Slash and Slash 4x4 Associated SC5M HPI Blitz Pro-Line PRO-2 Losi 22SCT, and TEN-SCTE...

The waterproof RF-40WP receiver allows you to take your RC vehicle anywhere you can dream! This is the ideal upgrade for your RC vehicle, and is usable with any HPI TF-40 or TF-45 radio! Simply bind and drive and have fun with your friends thanks to...

FEATURES: Aluminum constructionAnodized dark brown in color INCLUDES: Four shock capsEight shock collarsFour shock bottoms  

This is the Cylinder Head for the HPI Nitro Star G3.0 Engine.             These are the cooling fins at the top of the engine.FEATURES: Silver colored aluminum constructionINCLUDES: One cylinder...

This is a Rear Shock Set from HPI for use with the                HPI Firestorm Nitro Stadium TruckFEATURES: Direct Replacement...

This is a Shock Set from HPI for use with the                HPI Firestorm nitro stadium truckFEATURES: Direct replacement...

Maximize your fun with a wheelie bar set designed specifically for the E-Firestorm! This Wheelie Bar it will stop your E-Firestorm from flipping over when using full throttle, and it will allow you to pull perfect wheelies every time. This set includes...

One (1) set of wheels (YELLOW) for use on Kyosho Ultima SC / HPI Blitz / Traxxas Slash Rear / Slash 4x4 / Slash 4x4 / Jammin SCRT10. These wheels are for the Kyosho Ultima SC / HPI Blitz  /  Slash 4x4 (front or rear) / Jammin SCRT10, or...

This is a set of four DE Racing Trinidad SC Rear Wheels. These are intended for use on the rear of the Traxxas Slash, as well as the front and rear of the Slash 4x4, the Kyosho Ultima SC, HPI Blitz, and the OFNA/Jammin 4WD trucks. Named after a rugged...

This is the Skid Plate Set for use on the HPI Racing Blitz RTR FEATURES: Nylon construction Black in color INCLUDES: One Skid Plate Set REQUIRES: Installation on the chassis

The foundation to great off-road or on-road handling is always the shocks. That said, HPI Racing is proud to announce Aluminium Threaded Front and Rear Shock Bodies for the Firestorm. Precision machined from high quality aluminium and hard anodized to a...

.

These are the MT Mesh Chrome Wheels for the Rear 2WD or 4WD Trucks.FEATURES: Strong nylon construction          Chrome in color          Y-type mesh...

.

This is the RPM optional Roof-Mounted Light Bar Set for the Traxxas Slash, Associated SC10, Losi Strike and HPI Blitz. FEATURES Our Roof-Mounted Light Bar Set looks just like the roof light...

This is a Pro-Line PowerStroke SC Universal Hardware Kit. Pro-Line PowerStroke SC Shocks are not just for Slash® any more. Now you can mount these race proven dampers to literaly any Short Course or desert truck using Pro-Line's Universal Hardware...

This is the Front Supsension Arm Set           use with the HPI Firestorm 10T Stadium TruckFEATURES: Nylon Construction          Black in ColorINCLUDES: Two...

This is the Front Bulkhead Set for use with the HPI Firestorm 10T Stadium Truck FEATURES: Nylon ConstructionBlack in Color INCLUDES: One Nylon Front BulkheadOne Nylon Front Bulkhead Cover REQUIRES: Installation into Firestorm 10T

FEATURES: Constructed of aluminum INCLUDES: Four Wheel Hub Hexes with six Set Screws REQUIRES: Installing into each wheel SPECS: Thickness: 0.19" (4.7mm) Width: 0.47" (12mm)  

FEATURES: Aluminum construction Gray in color INCLUDES: One 3.0mm Motor Plate REQUIRES: Installation on the vehicle SPECS: Length: 86mm (3.4") Width: 53mm (2.1") Thickness: 3mm (0.12")  

FEATURES Constructed of steel   INCLUDES 19 Tooth 48 Pitch Pinion Gear   SPECIFICATIONS Diameter of Hole: 1/8" (3mm)Number of Teeth: 19Pitch: 48

FEATURES Constructed of steel   INCLUDES 20 Tooth 48 Pitch Pinion Gear   REQUIREMENTS Installing on motor shaft and tightening set screw   SPECIFICATIONS Diameter of Hole: 1/8" (3mm)Number of...

FEATURES Constructed of steel   INCLUDES 31 Tooth 48 Pitch Pinion Gear   REQUIREMENTS Installing on motor shaft and tightening set screw   SPECIFICATIONS Diameter of Hole: 1/8" (3mm)Number of...

This is the Shock Tower Set for use on the                           HPI E-Firestorm.FEATURES: Nylon...

FEATURES: Black nylon construction INCLUDES: Two rear bearing (hub) carriers Two RPM decals

FEATURES: Nylon construction Black in color INCLUDES: One each left and right Rear Hub Carriers  

FEATURES: Silver in color                   Steel construction                   Hex type screw These screws can be used anywhere this size is...

FEATURES Constructed of steel   INCLUDES 17 Tooth 48 Pitch Pinion Gear   REQUIREMENTS Installing on motor shaft and tightening set screw   SPECIFICATIONS Diameter of Hole: 1/8" (3mm)Number of Teeth: 17

FEATURES: Constructed of steel INCLUDES: Two 3x49.5mm Shock Shafts used in the HPI Firestorm REQUIRES: Installing in shock bodies SPECS: Length: 1.9" (49.5mm) Diameter: 0.12" (3mm)

FEATURES: Nylon construction with strengthening ribs, black in color Full 6" (152mm) width protects entire front end INCLUDES: One optional RPM Front Bumper for the Associated RC10B4 buggy and the RC10T4 truck

FEATURES: Nylon construction Black in color INCLUDES: One Front Chassis Brace  

FEATURES: Steel construction Black in color INCLUDES: Two Axles REQUIRES: Installation onto vehicle SPECS: Diameter: 5mm (0.20") Length: 26mm (1.02"

These are the optional MIP 5/32" x 1/8" Ball Bearings for the HPI Blitz. FEATURES: Steel construction Shielded INCLUDES: Two Ball Bearings SPECS: Outer Diameter: 5/16" Inner Diameter: 5/32" Thickness: 1/8"

FEATURES: Nylon construction with strengthening ribs, blue in color Full 6" (152mm) width protects entire front end INCLUDES: One optional RPM Front Bumper for the Associated RC10B4 buggy and the RC10T4 truck

This is a package of 1.8x5mm Black X-Rings for the HPI Firestorm.FEATURES: Black silicone constructionINCLUDES: Eight X-ringsREQUIRES: Installation on the FirestormSPECS:    X-ring thickness: 1.8mm

These are the MT Mesh Black Wheels for the Rear 2WD or 4WD Trucks.FEATURES: Strong nylon construction          Black in color          Y-type mesh...

Includes Receiver Battery Charge Connector Genuine HPI quality spare part for easy maintenance and repairs. Also fits any nitro-powered car, buggy or truck to allow easy charging of the receiver battery pack! The additional charging lead allows you to...

FEATURES: Constructed of steel black in color INCLUDES: Ten Step Screws REQUIRES: Installing on vehicle following instructions in manual SPECS: Length: 14mm Diameter: 3.2mm