EB48SL

Product DescriptionTKR5288 – Chassis (black anodized, lightened, EB/SCT/SL)This is the stock chassis for the SCT410.3 and EB48SL.  It is a nice upgrade from the original SCT410 chassis and a less expensive alternative to the CNC 7075 lightened and...

This is the Split Center Diff Motor Mount for the Tekno RC NT48 Truggy, NB48 Buggy, and the SCT410. FEATURES Constructed of CNC machined aluminum, anodized in gun metal gray Compatible with Pro4 and 1/8...

This is the optional CNC Split Center Diff Mount for the Tekno RC SCT410.3 and EB48SL. FEATURES Constructed of aluminum, black in color Replaces the TKR5263 composite diff mounts ...

.

.

.

.

TKR5579 – Tapered Driveshaft (center, front, 7075 aluminum, black anodized)Lighten your SCT410 up with this 7075 aluminum drive shaft by 10 grams! This drive shaft has 10 grams less rotating mass than the standard drive shaft for the SCT410 (TKR5578). It...

TKR5584 – Shock Tower (rear, 7075, black ano, SCT.3/SL)This is the stock rear shock tower for the SCT410.3 and EB48SL.  It is 6mm lower than the original SCT410 shock tower and should only be used with TKR5515 rear suspension arms for the SCT410.3...

.

.

TKR5569 – 17mm Narrow Wheel Hubs (for TKR5580 axles, lightened, w/pins, 2pcs)These wheel hubs are used to narrow the track width of the EB48SL, which results in a nimbler handling buggy.  This works best on smaller tight tracks where maximum...

.

TKR5545 – Rear Hubs (L/R, CV or uni, SCT410.3/EB48SL)This is a set of rear hubs for the SCT410.3 and EB48SL.  They are compatible with the original SCT410 only if you are using the SCT410.3/EB48SL rear arms (TKR5515).  These hubs have 0 degrees...

TKR5545B – HRC Rear Hubs (L/R, CV or uni, SCT.3/SL)By lowering the hinge pin location compared to the stock rear hubs (TKR5545), we have raised the rear roll center in just the right place. Use these hubs to increase on power traction and stability while...

.

TKRBB06135 – Ball Bearings (6x13x5mm, 4pcs)SCT410.3 and EB48SL bearings for outside of steering blocks and outside of rear hub carriers. 4pcs required in kit.

TKR5730 – V2 Adjustable Hinge Pin Brace Set (composite, SCT410.3, EB48SL)The V2 adjustable hinge pin braces allow more adjustment than ever before.  They require TKR5165 square inserts for adjustment.  Aluminum upgrades are sold individually –...

Product DescriptionTKR5188B – Rod Ends (hard, 6.8mm, M4 thread, SCT/SL, 8pcs)These are the stock rod ends for the SCT410.3 and EB48SL.  They are lighter than the original TKR5051 rod ends and require TKR5123 turnbuckles (with M4 thread) to install...

These rear skid plates are for the Tekno RC EB48/48.3/48SL / ET48/48.3 / NT48 / SCT410/410.3.

.