Misc.

DESCRIPTIONThis is a Carson product spindle drive with joint shaft and it"s for use in conjunction with item 907066 (Gear Motor). With the use of this item on the Dumper truck (item 9070500) the operator may remotely dump cargo.

Vanquish Products Aluminum Hurtz Shifter 3 Position Dig for Vanquish Products VFD TransmissionDesigned to increase the capability of your vehicle while maintaining maximum strengthCompatible with the Vanquish Products VFD TransmissionRear output does not...

Introducing from NHX RC this Engine Speaker Module for RC cars.Run electric RC but with real car engine noise!RC engine speaker module with 10 different engine sounds ranging from race and rally cars to big V8’s, trucks, and tanks. Also 5 programmable...

Introducing from NHX RC Engine Speaker Module for RC cars.Run electric RC but with real car engine noise!RC engine speaker module with 10 different engine sounds ranging from race and rally cars to big V8’s, trucks, and tanks. Also 5 programmable vehicle...

4-in-1 Ignite Voltage Regulator Module for TOYAN FS-L400 Inline Four-cylinder Four-stroke Water-cooled Nitro Engine ModelFeatures:.The ignite voltage regulator module is suitable for TOYAN FS-L400 inline four-cylinder four-stroke water-cooled nitro...

DESCRIPTIONMAC 28 PISTON / LINER/ ROD SET(ASSEMBLED)Categories: Car Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

DESCRIPTIONH30 Cylinder Compete SetCategories: Car Parts, Hyper 30 Engines Parts, Nitro Engine Parts & Hop-Ups

DESCRIPTIONH30 Cylinder Sleeve & PistonCategories: Car Parts, Hyper 30 Engines Parts, Nitro Engine Parts & Hop-Ups

When assembling your dampers, this air remover offers you a faster way of drawing out the bubbles to help save you time. This item can be used for machines such as 1/8 Nitro that use long dampers. Air remover X 1pc.Pump x 1pc.Sticker x 1pc...

Description:Yeah Racing new generation of Dampers, the Qutus (Quick Tuning System) allows for you to adjust the damper action without taking the damper apart and having to change oil! Build with the included adjustable pistons to quickly change how much...

Description:Yeah Racing new generation of Dampers, the Qutus (Quick Tuning System) allows for you to adjust the damper action without taking the damper apart and having to change oil! Build with the included adjustable pistons to quickly change how much...

Yeah Racing new generation of Dampers, the Qutus (Quick Tuning System) allows for you to adjust the damper action without taking the damper apart and having to change oil! Build with the included adjustable pistons to quickly change how much dampening...

Yeah Racing new generation of Dampers, the Qutus (Quick Tuning System) allows for you to adjust the damper action without taking the damper apart and having to change oil! Build with the included adjustable pistons to quickly change how much dampening...

The Kyosho nitro starter pack includes practically everything you need to run your nitro vehicle. Includes a fuel bottle, re-chargeable igniter with charger, a phillips and flathead screwdrivers, and a four way and 5 way wrench!

Description:Yeah Racing new generation of Dampers, the Qutus (Quick Tuning System) allows for you to adjust the damper action without taking the damper apart and having to change oil! Build with the included adjustable pistons to quickly change how much...

Description:Yeah Racing new generation of Dampers, the Qutus (Quick Tuning System) allows for you to adjust the damper action without taking the damper apart and having to change oil! Build with the included adjustable pistons to quickly change how much...

Description:Yeah Racing new generation of Dampers, the Qutus (Quick Tuning System) allows for you to adjust the damper action without taking the damper apart and having to change oil! Build with the included adjustable pistons to quickly change how much...

DESCRIPTIONMAC 28 6-PORT PISTON & LINERCategories: Car Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

74031-08 Crankshaft (KE21SP)Crankshaft for KE21SP engine.

This is a replacement Team Losi Racing 7075 Aluminum Motor Adapter, and is intended for use with the Team Losi Racing TEN-SCTE 2.0 1/10 scale 4WD short course truck.

Features:For: 1/10 & 1/8 RC VehiclesMaterial: AluminumColor: BlackSpecs:150x90x158mmIncludes:Metal 1/10 Foldable Engine Repair Stand / Shop Crane Lift

Features:For: 1/10 & 1/8 RC VehiclesMaterial: AluminumColor: RedSpecs:150x90x158mmIncludes:Metal 1/10 Foldable Engine Repair Stand / Shop Crane Lift

.

74031-12 Back Plate Set (KE21SP)Back plate set for KE21SP engine. Includes starter shaft and hardware.

Features:For: HPI Savage 21, 3.5, 4.6, X, Bullet ST 3.0 / Bullet MT 3.0, Firestorm 10T 3.0 / Nitro MT2 G3.0Nitro Star 21BB, F3.5, S-25, F4.6, G3.0 EngineSpecs:Center Hole to Center Hole: 27mmCorner to Corner: 32mm12mm across flat one-way bearing,...

74031-05 Conrod (KE21SP)Connecting rod for KE21SP engine.

DESCRIPTIONH30 Crankshaft for Pull StarterCategories: Car Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

Overview Hangar 9's new Ultra Fuel Pump can be used with both gasoline and glow fuel and features overdrive gearing and transfers fuel quickly. The pump is ergonomically designed to be easy to hold on to while fueling and comes with a two-year...

DESCRIPTIONM28 Cylinder Head – Cast for RTR CarCategories: Car Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

Don't let body post holes ruin that perfect body that you've painted up! Use these Invisible body mounts, secure one magnet on your body with either hot glue or double sided tape. The mount has an adjustable angle so that you can mount it perfectly even...

Description:Don't let body post holes ruin that perfect body that you've painted up! Use these Invisible body mounts, secure one magnet on your body with either hot glue or doublesided tape. The mount has an adjustable angle so that you can mount it...

74031-10 Oneway Bearing For Recoil (KE21SP)

This is a Losi Mod 1.5 Pinion Gear, with an 8mm bore. These pinion gears are used with the 1/6 scale Losi Audi R8 LMS Supercar, but can be used with other applications. 

.

1.5V Ignite Voltage Regulator Module Features:1, Suitable for TOYAN Four Stroke Methanol Engine2, Let the car have less weight and more accelerationSpecifications:Material: PlasticProduct Weight: 50gPackage Dimensions: 15 x 10 x 5cmPackage Weight:...

Replacement part for the Nitro Star G3.0 HO Engine #107824

.

DescriptionBlack springs: 1.0mmBronze springs: 1.1mmCategories: [1/8 On-Road] Hyper GT2 Nitro, Clutch Parts & Shoes, Hyper 7 TQ Buggy, Hyper GTS Nitro On-Road, Hyper MT Plus Nitro, Hyper SS Nitro, Hyper SST & Cage Nitro Truggy, Hyper VS Nitro...

Specifications:Material: Aluminum alloyColor: BlackMax Height: 78mmWidth: 59mmMin Height: 35mmWidth: 89mmItem Weight: 1.5ozEngine NOT included! Package includes tool only!

30 gram brass rear/front suspension holder for the RB6 series. Quickly adds weight to the rear of your RB6.6 MID at the most ideal location for improved rear traction and stability. Excellent for use in the laydown gearbox on dirt tracks. Machined...

DESCRIPTIONH30 Connecting RodCategories: Car Parts, Hyper 30 Engines Parts, Nitro Engine Parts & Hop-Ups

DESCRIPTIONCLUTCH SHOES ALUM. BLUE 1.8gCategories: Clutch Parts & Shoes, Hyper 1/8 Nitro Cars, Hyper 7 TQ Buggy, Hyper GTS Nitro On-Road, Hyper SS Nitro, Hyper SST & Cage Nitro Truggy, Hyper VS Nitro Buggy, Hyper VT Nitro On-Road, Nitro Engine...

.

Springs kit 1.0 (4)

Springs kit 0.9/1.0/1.1 (4 pieces each size).

Features: Black colored Made of aluminum For the Reedy Sonic Motors Includes: One JConcepts Black Aluminum Motor Timing Cover

Having available option parts for a popular vehicle makes the hobby just that more fun and interesting. JConcepts has rolled out a sweet looking replacement motor plate for the popular B6 vehicle with lay down 3-gear transmission. With the...

This is replacement Slipper Pads for the PRO-Series 32P Transmission. Do you need to replace the Slipper Pads on your PRO-Series 32P Transmission? Then this is what you need!Slipper Pads (1 pc)for PRO-Series 32P Transmission (6350-00)

TATT-019BU Aluminum Rear Adjustable Suspension Mount For TT-02 RWD Drift TATT-S03 BlueDescription:Adjustable rear suspension mount for Yeah Racing's TT02 RWD Drift Conversion Kit! Adjustable from 1, 3.5, 5 degrees of toe in for you to setup your car to...

Fits: Hyper 21, Hyper 30 and Mac 28 Engines.

DESCRIPTIONCONNECTING RODCategories: Car Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

This is the optional Robinson Racing 45T Spur Gear for the 1/10 scale Traxxas Slash and Stampede 4x4. FEATURES Machined hardened steel with a blackened finish that improves lubricity...

.

DESCRIPTIONCNC CLUTCH BELL 16T, w/5x12mm bearingCategories: Car Parts, Clutch Parts & Shoes, Hyper 1/8 Nitro Cars, Hyper GTS Nitro On-Road, Hyper Monster Truck, Hyper MT Plus Nitro, Hyper SS Nitro, Hyper SST & Cage Nitro Truggy, Hyper VS Nitro...

DESCRIPTIONCNC CLUTCH BELL 19T, w/5x12mm bearingCategories: Car Parts, Clutch Parts & Shoes, Hyper 1/8 Nitro Cars, Hyper GTS Nitro On-Road, Hyper Monster Truck, Hyper MT Plus Nitro, Hyper SS Nitro, Hyper SST & Cage Nitro Truggy, Hyper VS Nitro...

Features:For: 1/10 Nitro Touring CarsMaterial: Plastic Exhaust with Metal HeaderColor: Black/SilverSpecs:Exhaust Length: 129mm / 5inExhaust Width: 35mm / 1.3inHeader Length: 33mm / 1.2inHeader Width: 40mm / 1.5inPackage Includes:1/10 Exhaust with Metal...

Feature:For:  HPI Savage X 4.6 / Firestorm 10TMaterial: SteelInclude:One way bearing (1)

.

DESCRIPTION1/8 LIGHT WEIGHT FLYWHEEL, 1PCCategories: Car Parts, Clutch Parts & Shoes, Hyper 1/8 Nitro Cars, Hyper SS Nitro, Hyper SST & Cage Nitro Truggy, Nitro Engine Parts & Hop-Ups, Upgrades

DESCRIPTION1/8 LIGHT WEIGHT FLYWHEEL, 1PC ORANGECategories: Car Parts, Clutch Parts & Shoes, Hyper 1/8 Nitro Cars, Hyper SS Nitro, Hyper SST & Cage Nitro Truggy, Nitro Engine Parts & Hop-Ups, Upgrades

DESCRIPTIONH30 Rear Alum Mount for Crank Off Pull StarterCategories: Car Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

DESCRIPTIONH30 Carburetor Main BodyCategories: Car Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

.

.

DESCRIPTIONMINI ST CLUTCH BELL 14TCategories: [1/10 Short Course] Hyper SC10 Nitro, Car Parts, Clutch Parts & Shoes, Nitro Engine Parts & Hop-Ups

DESCRIPTIONNew Rear Ball Bearing-14x25.4x6mmCategories: Hyper 21 Engines Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts

74031-02 Under Head (KE21SP)Head button for KE21SP engine.

.

DESCRIPTIONALU. BURN ROOM FOR MAC 28 TURBOCategories: Car Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

This is a replacement Slide Valve for the Axial 28/32 Engine.FEATURESDirect replacement partSteel constructionINCLUDESOne slide valveREQUIREMENTSRemainder of carburetorSPECIFICATIONSLength: 1.37" (35mm)Diameter: .43" (11mm)

DESCRIPTIONBall bearing 7x19x6Categories: Car Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

H30 Turn Tube for Crank Off Pull Starter

DESCRIPTIONH30 Alum Burn Room – StandardCategories: Car Parts, Hyper 30 Engines Parts, Nitro Engine Parts & Hop-Ups

.

DESCRIPTIONCARBURETOR BOLT SETTING PIN/ORINGCategories: Car Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

H30 Rear Back Cover for Without Pull Starter

DESCRIPTIONNew Main Needle Hub Value SetCategories: Car Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

3528 Engine Output Yoke

DESCRIPTIONNew Throttle Rod NutCategories: Car Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

Material:Aluminum AlloyColor:PurpleDiameter: 10mm/0.39inchLength: 29mm/1.14inchPackage Includes:1 x RC Fuel Filter,Purple

Genuine HPI spare part for ensured quality, correct maintenance and easy repairs. See below for kit compatibility.

This is the Long Brass Bushing for use with the Robinson Racing #7854 GEN3 Slipper Unit (RRPC7854). FEATURES: Brass constructionSupplied with the GEN3 slipper unit for the Traxxas Slash 4x4 INCLUDES: Long Brass Bushing

FEATURES: Brass construction Gold in color Threaded with two O-rings pre-installed INCLUDES: One Idle Needle Valve for the HPI Nitro Star F4.6 SPECS: Length: 37.5mm (1.48") Diameter of Needle: 5.35mm (0.21")

Description: Increase the efficency of the drivetrain on your Sprint 2 with these Urethane belts! Feature: For:HPI Sprint 2 Material: Urethene Color: Black Include: Urethane Belt for Sprint 2 (1 pc)

FEATURES: Steel construction Black rubber o-ring pre-installed INCLUDES: One idle adjustment screw REQUIRES: Assembly on the engine

This is a replacement Green clutch spring for the Werks Racing Adjustable 4-Shoe Off Road Clutch System.

.

TKR1726 – Piston Pin Retainers (21aP/21bM/21aM, 2pcs) Piston pin retainer clips (wrist pin clips) for the Blok 21aP, 21bM, and 21aM engines.  Package Contents2ea Piston Pin Retainer 

Product DescriptionTKR1737 – Engine Screw Set (21aM/aP/bM)This screw set contains the head and cover plate screws for a single 21aM, 21aP, or 21bM engine. Package Contents4ea Backplate Screws 4ea Cooling Head Screws 

DESCRIPTIONSILICONE MANIFOLD SEALS, 2 PCSCategories: Car Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

DESCRIPTIONM8 AIR FILTER FOAM COVER, 2PCSCategories: [1/8 Buggy] Hyper VS Nitro, [1/8 On-Road] Hyper GTS Nitro, [1/8 On-Road] Hyper VT Nitro, [Monster Truck] Hyper MT Nitro, Car Parts, Clutch Parts & Shoes, Nitro Engine Parts & Hop-Ups

DESCRIPTIONH30 Piston Pin & “G” Clips setCategories: Car Parts, Hyper 30 Engines Parts, Nitro Engine Parts & Hop-Ups

DESCRIPTIONNew Sub Throttle Needle ValueCategories: Car Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

DESCRIPTIONNew Throttle Adjustable ScrewCategories: Car Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

DESCRIPTIONNew Main Needle ValueCategories: Car Parts, Hyper 30 Engines Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

Product Description Tekno RC continues to push the boundaries of the evolving 1/8th brushless class. Introducing our new 0.7mm clutch springs. The 0.7mm springs engage almost instantly and provide a true bridge between direct drive and clutch systems...

.

FEATURES: Metal and Plastic Construction          Black and Silver in Color          Durablity INCLUDES: Two Brake Lever and Ball Ends REQUIRES: Installation onto...

DESCRIPTIONPISTON PIN &”G” CLIPS FOR MAC 28Categories: Car Parts, Mac 28 Engine Parts, Nitro Engine Parts & Hop-Ups

FEATURES: Plastic lid opener with finger pull allows quick openings for            refueling during races when pit time is short          Can be cut to...