B6 Series

B6.1 FL MIP Drivetrain Kit, 67mm

REQUIRES- B6.2 - B6.4 gear box parts including- B6 39t IDLER GEAR, #91799 TOP SHAFT, BEARINGS AND HARDWARES.High performance heavy duty laydown gear box with motor plate for AE B6.2-B6.4 drag racing...

For the Associated B6.4 B6.3 B6.2 based chassis.New version 2 hinged design of our popular single wheelie bar concepts.Extra long 3mm thick carbon fiber wheelie bar that can extend to 14.5" long...

.

B6.1 FL MIP Bi-Metal(TM) CVA Bones, 67mm

.

Team Associated RC10 B6.1 Sealed Bearing Set(4)     10x15x4(2)      6x13x5(8)      5x10x4(8)      3x7x3

.

B6.1 FL MIP Diff Outdrives, aluminum

Wide stance rear drag racing shock tower for the B6.3 - B6.1 laydown and layback gear box.Uses the stock rear shock and allows for an upright angle for more stability.Made of glossy 4mm carbon fiber.

Also works on the B6.4-B6.2 laydown series.New super light alloy locked spur mount with titanium center bolt for our lightest spur locker yet. Excellent for stock buggy and oval racing.The mount and...

Stealthy 2 color anodized alloy steering crank set for the Associated B7 series and also the B6.4 series.Customized polished black base with blue chamfered accents goes great with your stock plastic...

FT Laydown/Layback Motor Plate, graphite Our new Factory Team Motor Plate adds strength and rigidity with its 3mm thick material, while also reducing the weight by 40% over the stock motor plate. It...

.

Having available option parts for a popular vehicle makes the hobby just that much more fun and interesting. JConcepts has rolled out a sweet looking replacement motor plate for the B6.1 | B6.1D | T6...

.

B6.1 FL MIP Pucks(TM), with pins

FT 12 mm Pistons V2, 2x1.6, thinThese thinner shock pistons give you less "pack" inside the 12mm shock. Terrific for tuning in all kinds of track conditions, they are particularly helpful on carpet...

.

.

.

Stealthy 2 color anodized alloy steering rack for the Associated B7 series and also the B6.4 series.Customized polished black base with blue chamfered accents goes great with your stock plastic parts...

.

2.5mm thick carbon fiber spacers that raises the AE B6.1 - B6.4 series laydown/layback gearboxes up so that the dog bones angle sits straighter when at ride height and gives you extra room to install...

New version top cross brace for the Exotek CB6 CB6.4 Chassis conversion.Lowered to hold in LCG type shorty batteries and an additional front hole to allow the servo to be mounted further back if...

.

Hard anodized 7075 alloy 26T idler gear for the B7, B6.3, B6.2 etc layback and stand up gear boxes (replaces the stock 26t plastic idler gear).Must have for high powered or high grip racing...

.

Stealthy 2 color anodized 7075 alloy rear ball stud mount for the B6.1 T6.1 SC6.1.Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market...

Stealthy 2 color anodized 7075 alloy rear ball stud mount for the B6.3-B6.1 T6.1 and SC6.1 series.Customized polished black base with blue chamfered accents goes great with your stock plastic parts...

.

.

JConcepts adds to the amazing line-up of accessories for the B6.1 | T6.1 | SC6.1 with the aluminum C mount block. Available in blue and black colors, the precision machined piece is carefully crafted...

.

.

.

.

.

This part fits the following vehicles:CR12DR10DR10MMT12 Monster TruckMT12 Monster VanPro2 DK10SWPro2 LT10SWPro2 RT10SWPro4 SC10RB10RC10B6.1RC10B6.1DRC10B6.1DLRC10B74RC10B74.1RC10B74.1DRC10F6RC10SC6...

.

Lightweight polished titanium slipper bolt for the B6.3-B6.1 T6.1 and SC6.1 series.Almost half the weight of the stock bolt at 2.2gr, this titanium bolt lightens your rotating mass and lowers your CG...

Lightweight polished titanium slipper bolt for the B6.1 T6.1 SC6.1Almost half the weight of the stock bolt at 2.2gr, this titanium bolt lightens your rotating mass and lowers your CG.  Direct fit on...

.

.

Rear Shock Springs Gray, 2.00 lb/in, L61mm This part fits the following vehicles:

This part fits the following vehiclesRC10B6.1RC10B6.1DRC10T6.1RC10SC6.1Reflex 14BRC10B74RC10B6.1DLRIVAL MT10RC10B6.2RC10B6.2DRC10B74.1RC10B74.1DRC10T6.2RC10SC6.2Pro4 SC10RC10B6.3RC10B6.3DRC10B6...

Front Shock Springs Yellow, 4.30lb/in, L44mm This part fits the following vehicles:

Rear Shock Springs Green, 1.80 lb/in, L61mm This part fits the following vehicles:

Rear Shock Springs White, 1.90 lb/in, L61mm This part fits the following vehicles:

Rear Shock Springs Blue, 2.20 lb/in, L61mm This part fits the following vehicles:

.

Front Shock Springs Green 3.1 lb/in, L44mm This part fits the following vehicles:

.