Traxxas

From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. The clear...

FEATURES: Blue silicone construction INCLUDES: One blue silicone exhaust tube SPECS: Length: 203.2mm (8") Inner diameter: 10mm (0.39") Outer diameter: 14mm (0.55")

Tinted windows for 9812-series TRX-4M™ F-150® bodiesAccessory part for these models:TRX-4MT™ 1/18 1979 Ford® F-150® Monster TruckTRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™TRX-4M™ 1/18 1979...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your X-Truck™. The hubs are carefully machined from a block of 6061-T6 aluminum to add strength and...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your X-Truck™. The hubs are carefully machined from a block of 6061-T6 aluminum to add strength and...

FEATURES: Nylon construction, gray in color Replaces worn or damaged chassis INCLUDES: One long wheelbase chassis REQUIRES: Installation on the E-Maxx SPECS: Length: 11.5" (292.1mm) Width: 6.5" (165...

FEATURES: One-piece plastic construction, black in color Rubber plug INCLUDES: ESC Mount with Plug Receiver Box

Left and right 783 mm steel chassis rails for the TRX-6® Ultimate Hauler

Restore your TRX-4® back to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything...

The heavy-duty WideMaxx® 190 mm steel constant-velocity driveshaft is built for 8s power and bombproof durability. A laser-etched Traxxas logo adds extra style to the driveshaft.Fits X-Truck® models...

Restore your Traxxas 4X4 model to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything...

The stainless hardware kit contains all the stainless hardware used on Spartan® and DCB M41 boats.

Upgrade your Spartan® or DCB-M41 with this high-performance steel 42x59 mm prop. Includes locknut.Spartan SR requires 5742X aluminum rudder mount when using steel prop if not already installed.

Transmission, complete (fits Summit (2-speed))

Brake disc (semi-metallic material)

FEATURES: Composite plastic construction Black in color Left front for Slayer 4x4 Pro INCLUDES: Upper and lower suspension arms REQUIRES: Installation on the Slayer 4x4 Pro

Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))Fits 5556 pressure plate and hub.

The 10 mm aluminum flat wrench is anodized black to protect the finish on TUBES aluminum turnbuckles when adjusting them.

30 cc tube of ultra high performance premium grease

FEATURES: For use in the Traxxas Revo and also anywhere a screw this size is required Steel construction, black in color INCLUDES: Six 4x16mm Button Head Machine Screws REQUIRES: 2.5mm hex...

BODY CONVERSION KIT Rustler® 2WD bodies.

Front and Rear body latches for clipless Rustler® 2WD bodies.

Front Bumper and Bumper Mount.  Includes 4x23 mm screws (2) and 3x10 mm screws (2).

Front Bumper and Bumper Mount.  Includes 4x23 mm screws (2) and 3x10 mm screws (2).

Front Bumper and Bumper Mount.  Includes 4x23 mm screws (2) and 3x10 mm screws (2).

Front Bumper and Bumper Mount.  Includes 4x23 mm screws (2) and 3x10 mm screws (2).

The fully-waterproof Velineon® VXL-3s forward/reverse electronic speed control simplifies brushless technology with three drive modes, low-voltage detection, and EZ-Set® one-button simplicity.Fits...

Make sure your servo saver is in good working order to protect your steering servo against impacts. This replacement servo saver includes a new spring and mounting screw to replace damaged or worn...

Fits Continued: 1/10 Monster Mutt / Grave Digger 30th / Maximum Destruction / Ford Raptor / Rally VXL / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Sport / Nitro Stampede / Revo / T-Maxx...

Give your Mini model a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your vehicle with stainless steel hardware for long-lasting...

Ring gear, differential/ pinion gear, differential (planetary) (12/47 ratio) (rear)

Replacement cover set includes gear cover, center driveshaft cover, and receiver box cover with plug

The Pro Scale® Aluminum Wheel System gives you maximum flexibility to create custom wheels for your Maxx Slash®. These wheel washers are machined from ultra-tough 6061-T6 aluminum and beautifully...

The Pro Scale® Aluminum Wheel System gives you maximum flexibility to create custom wheels for your Maxx Slash®. These wheel washers are machined from ultra-tough 6061-T6 aluminum and beautifully...

Replacement Maxx Slash® front bumper for trucks with the 10290 LED light kit.

FEATURES: Composite body Assembled INCLUDES: Two GTR Composite Shocks Bottle of 60W Silicone Shock Oil

FEATURES: 2.0 lb/in tension Red coating INCLUDES: Two GTR Red Shock Springs for the Traxxas Slayer REQUIRES: Assembly onto the Traxxas Slayer Shocks SPECS: Length: 49mm (1.9") Diameter: 22mm (0...

FEATURES: 1.8 lb/in tension Red coating INCLUDES: Two Shock Springs REQUIRES: Assembly onto the Traxxas Slayer Shocks SPECS: Length: 49mm (1.9") Diameter: 22mm (0.87")

FEATURES: 7075-T6 aluminum constructed tubes Red and black in color Fits front or rear INCLUDES: Two 88mm toe links Eight rod ends One wrench REQUIRES: Installation onto Slayer PRO 4x4

.

FEATURES: Nylon construction Black in color INCLUDES: Rear Bumper for the Traxxas Slayer pro 4x4 REQUIRES: Installation on the vehicle

FEATURES: Black plastic construction INCLUDES: Two arms REQUIRES: Installation following the instruction manual

FEATURES: Composite plastic construction Black in color Right front for Slayer 4x4 Pro INCLUDES: Upper and lower suspension arms REQUIRES: Installation on the Slayer 4x4 Pro

FEATURES: Aluminum construction Nylon rod ends Anodized Red in Color INCLUDES: Two Assembled Rod Ends REQUIRES: Use with Progressive-2 Rockers SPECS: Length: 91mm (2.58") Diameter: 5mm (0.20")

Tires & wheels, assembled, glued (SCT Split-Spoke green wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM rated)

Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, beadlock style wheels, paddle tires, foam inserts) (2) (4WD front/rear, 2WD rear only) (TSM rated) For These Models: Ford F-150...

Wheels, SCT Split-Spoke, black, satin chrome beadlock style, dual profile (2.2" outer 3.0" inner) (2WD front) (2) Replacement part for these models: Ford F-150 Raptor Ford Raptor Nitro...

Wheels, SCT Split-Spoke, black, satin chrome beadlock style, dual profile (2.2" outer 3.0" inner) (4WD f/r, 2WD rear) (2) Replacement part for these models: Ford F-150 Raptor Ford Raptor Nitro...

FEATURES: Split spoke satin chrome and black beadlock style wheels Kuhmo S1 style tires with foam inserts Fits 2WD front INCLUDES: Two Kuhmo Tires,  Two SCT Split Spoke Wheels REQUIRES:...

FEATURES: Satin chrome, black beadlock style wheels Kuhmo style tires with foam inserts 2WD front application INCLUDES: Two Kuhmo Tires pre-mounted on SCT Wheels REQUIRES: Installation on to...

FEATURES: Fits front of the 2 wheel drive 1/10 scale Traxxas Slash Black colored wheel with satin chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Split Spoke Front Wheels in...

.

FEATURES: Rubber construction SCT off-road racing Foam inserts INCLUDES: Two Tires with Inserts for the Traxxas Slash 4 x 4 REQUIRES: Mounting to Wheels Tire Glue SPECS: Outer Diameter: 4.3" (109mm)...

Wheels, SCT black, orange beadlock style, dual profile (2.2" outer, 3.0" inner) (4WD f/r, 2WD rear) (2) Wheels, SCT black, orange beadlock style, dual profile (2.2" outer 3.0" inner) (4WD f/r, 2WD...

.

.

Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), Rock n' Roll (painted, decals applied) (assembled with front & rear latches for clipless mounting)Is it time to upgrade your Slash® with...

.

.

Body accessories kit, 2017 Ford Raptor® includes grill, hood insert, side mirrors, & mounting hardware

FEATURES: Black nylon construction INCLUDES: One Battery Hold Down One Retainer Hold Down One Battery Post One Foam Spacer One Angled Body Clip REQUIRES: Installation on the chassis

 

 

 

 

 

.

 

This is the Radio Tray/Retainer for the Traxxas DCB-M41 40" Twin Hull Catamaran. FEATURES Molded plastic construction, black in color Holds the...

.

.

.

.

.

.

.

.

Note: In order to be compatible, the Traxxas Summit must be the version with a TQ 2.4GHz radio system. 

FEATURES: Plastic construction Black in color INCLUDES: One Single Motor Gear Cover REQUIRES: Installation on the Traxxas E-Revo COMMENTS: For the double motor gear cover, order 5677

Gear, 27-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

This is the Rear Chassis Brace for the 1/10 scale Traxxas E-Revo and Summit to allow the proper installation of the telemetry expansion kit along with the mount #6556 (sold separately)...

FEATURES: Nylon construction Black in color Fits left or right side INCLUDES: One battery compartment vent

FEATURES: Nylon construction Black in color INCLUDES: One Battery Compartment Door  

FEATURES: Replaces damaged receiver boxes Constructed of black plastic INCLUDES: One top and bottom half receiver box for the Traxxas Slash Hardware REQUIRES: Installing receiver and bolting receiver...

FEATURES: Nylon construction Black in color INCLUDES: One Nylon Clutch Guard REQUIRES: Assembly onto vehicle

FEATURES: Metal Construction Silver in color INCLUDES: One Primary Clutch Assembly REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One 1st Speed Gear 32T One Input Gear 14T One Threaded Pin Shaft REQUIRES: Assembly onto Vehicle

FEATURES: Steel and nylon construction, black in color INCLUDES: 17 Tooth metal pinion gear. 29 Tooth plastic spur. REQUIRES: Installing on clutch assembly SPECS: Height: 1/2" (12mm) Diameter: 1-1/4"...

FEATURES: Rubber construction Black in color INCLUDES: One Rubber Transmission Plug One Rubber Charge Jack Plug REQUIRES: Assembly onto Vehicle

 Twin-Spoke wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design features a brilliant mirror-chrome face and a natural nylon...

FEATURES: Mounts to throttle servo and controls throttle and brake operation INCLUDES: Servo horn, two rod guides, brake spring, brake adjustment dial, two rods and throttle return spring REQUIRES:...

FEATURES: Metal Wire Construction Silver in color INCLUDES: One Metal Wire Hanger One 2.6mm x 8mm Button Head Hex Screw One 3mm x 6mm Button Head Hex Screw REQUIRES: Assembly onto Vehicle

FEATURES: Metal construction INCLUDES: Two Bellcrank Steering Posts REQUIRES: Assembly onto Vehicle

FEATURES: The Traxxas Resonator aluminum tuned pipe is specifically engineered to fit right in the chassis The single-chamber design dramatically increases bottom-end punch by nearly 20% between...

FEATURES Nylon construction, black in colorCompatible with the 17mm splined nuts used on many Traxxas vehicles   INCLUDES 17mm splined wheel wrench

FEATURES: Shock rebuild parts INCLUDES: Four blue plastic shock pistons Two blue rubber diaphragms Four black plastic shock ends Two piston lock nuts Four metal X-rings COMMENTS: This set will...

FEATURES: Red in color (small pink square indicates spring type) Metal construction INCLUDES: 2 springs REQUIRES: Installation on the Revo SPECS: Length: 1-11/16" (43mm) Inside diameter: 11/16"...

FEATURES: Red in color White band on spring indicates 2.9 tension rating INCLUDES: Two 2.9 rear shock springs REQUIRES: Nothing. These are direct fit springs. SPECS: Length: 1.8" (46mm) Outer...

FEATURES: Metal construction White in Color Blue Weight Rating 1.6 INCLUDES: Two Super Shock Springs Blue 1.6 REQUIRES: Assembly onto Vehicle

FEATURES: Metal construction White in Color Green Weight Rating 1.1 INCLUDES: Two Super Shock Springs Green 1.1 REQUIRES: Assembly onto Vehicle