Differentials / Transmissions / Gearboxes

MIP 13.5 Performance Bundle Package, Gear Diff, AE B64 #17050 Rotational mass is a spec class killer; it reduces initial drive and loads up the motor unnecessarily adding heat throughout the run resulting in less overall power, because of this MIP has...

PRODUCT DESCRIPTIONVFD TRANSMISSIONThe VFD Transmission kit from Vanquish Products is designed to provide an optimal balance of performance, scale appearance, strength and versatile optional accessories. The VFD’s design places the motor forward and as...

Vanquish Products Aluminum Hurtz Shifter 3 Position Dig for Vanquish Products VFD TransmissionDesigned to increase the capability of your vehicle while maintaining maximum strengthCompatible with the Vanquish Products VFD TransmissionRear output does not...

Robinson Racing Forward Only Standard Ratio Gear Kit                 for the Traxxas T-Maxx 3.3 and Revo 3.3.FEATURES: Installs in gearbox to allow forward only...

This is the Robinson Racing Forward Only Wide Ratio Gear Kit for the Traxxas T-Maxx 3.3 and Revo 3.3. FEATURES Installs in gearbox to allow forward only operation ...

MIP Super Ball Diff, Tamiya Blackfoot/ Monster Beetle #16210 MIP is proud to introduce the solution, over 30 years in the making: The MIP Super Ball Differential for your Re-Released 2016 Blackfoot and 2015 Monster Beetle. MIP is no stranger to solving...

.

Optional Generation 3 54T Slipper Unit                 from Robinson Racing for the Traxxas Slash 4x4.FEATURES: Steel and aluminum constructionINCLUDES: One High Performance...

Gmade R1 Transmission Set Main features: This is the Transmission Set for the Gmade R1 Rock Buggy Perfectly sealed transmission is excellent in dustproof effect. Full ball bearing Hardened steel counter gear shafts What's...

This is an optional Robinson Racing 60 tooth 0.8 module steel spur gear / slipper pad / backplate / bearing for the E-Revo. FEATURES: Steel constructionSilver in color INCLUDES: 60 tooth steel spur gearAluminum back plateHex slipper pad7x13mm...

This is the optional Robinson Racing GEN3 Slipper Unit for HPI Vehicles with the Flux Brushless System. FEATURES: Captured design to prevent slipper pad failureHardened steel spur gear handles the extra load of brushless motorsAircraft grade billet...

This is the optional High Performance 32P 56T .8 Mod Slipper Kit from Robinson Racing for the Traxxas Slash. FEATURES: Steel and aluminum construction INCLUDES: One High Performance Slipper Kit:One 52T Spur GearAluminum Back PlateHex Slipper PadOne...

FEATURES Machined steel construction INCLUDES 32P 27T Output Gear Two 4x4mm Set Screws

This is the optional Robinson Racing One-Piece Diff Locker Gear for the Axial Wraith. FEATURES: Precision machined hardened steel construction INCLUDES: One-Piece Diff Locker Gear

Vanquish Products VFD Transmission shaft set with slipper eliminator and pins.Package Includes:1pc Top steel top shaft1pc Slipper eliminator

Description: Competition grade Gear Differential featuring an aluminum diff halve which prevents expanding during hot conditions which will further prevent leakage from the gear diff. Aluminum outdrives with use of high quality POM swing shaft...

Optional Robinson Racing Hardened One Piece        Diff Locker Gear for use on the Axial AX10 Scorpion Vehicles.FEATURES: Hardened steel constructionINCLUDES: One Differential Locker...

FEATURES: Purple anodized finish          Two shoe design          Vents cut into the flywheel for cooling INCLUDES: One flywheel SPECS:   ...

Rebuild Kit-differential shaft/adjusting nut/rings(2)/balls(10/PTFE-coated bushing/thrust bearing/thrust washers (2)/spring washers (2)/fiber washers (4)

Dynamite Multi Pack 3 16x5 16 Unflanged Ball Bearing (10) Dynamite Multi Pack 3 16x5 16 Unflanged Ball Bearing (10) - Dynamite Cars

.

All gears are precision machined and hardened for the ultimate in reliability and performance. Includes: 1 X Axial Wraith Hardened Steel Bottom Diff Gear

This is the optional Robinson Racing 53 Tooth Center Diff Gear for the Traxxas Slash 4x4. FEATURES: Hardened steel construction INCLUDES: 53 Tooth Center Diff Gear

Red Anodized Diff Cover for your Vanquish Currie RockJock axles for the Vaterra Ascender.  Compatible with front and rear Ascender Vanquish Currie RockJock axles.* Package Includes 1pc Diff Cover *Not Compatible with factory...

DescriptionThis is a pack of Replacement Ball Bearings for Pro-Line’s Performance Transmission (#6092-00).This is also a stock replacement for the Transmission Ball Bearings that are included with the Pro-Line PRO-2 SC truck kit.What's Included11mm x 5mm...

This is the Aluminum Diff Gear from Robinson Racing Products for the Associated RC10GT series trucks. FEATURES: Aluminum ConstructionDirect fit replacementAnodized in light Gun Metal color.Holds 12 of the 3/32" diff balls. INCLUDES: One Differential...

.

This part fits the following vehicles: ProLite 4x4 ProRally ProSC 4x4

This is the Pro-Line HD Differential Gear Replacement for the Pro-Line #6261-00 and 6092-00 Performance Transmissions. FEATURES Steel construction Replaces steel diff gear in the...

This is the optional Hard Aluminum Diff Gear for the Axial AX10 Scorpion Series FEATURES: Hardened aluminum insures precision mesh and long lifeReplaces stock plastic gear INCLUDES: Hard Aluminum Diff Gear for the Axial AX10 Scorpion REQUIRES: Installing...

FEATURES: Constructed of hardened steel Mod 1, 5mm bore For use with Tekno's V3 Brushless Conversion Kits for use with the Losi 8, 8T, and Associated RC8 Two M4 setscrew holes (for long shafts) to secure the pinion to the motor shaft Allows the use of...

FEATURES: For use with Tekno RC's line of V3 Brushless Conversion Kits for the Associated RC8 and Losi 8 and 8T Constructed of CNC machined steel, lightened and hardened for durability May be used with ESC/motor brakes or mechanical brakes Number of...

This is the optional Robinson Racing Hardened Steel Idler Gear for use on the Axial AX10 Rock Crawler. FEATURES: Hardened steel construction INCLUDES: One Hardened Steel Idler Gear REQUIRES: Installation on the vehicle SPECS: Length: 9mm (0...

This is the Axial Differential Output Set. FEATURES Fits the 1/18 scale Axial Yeti Jr. SCORE, and the Yeti Jr. Molded plastic construction, white in color All components required to...

.

SC229 Gear Set(Scorpion 2014)Gear set for Scorpion 2014. Includes diff gear, slipper gear, and upper transmission gear.

.

.

This is a pack of Replacement Differential Seals, O-Rings and Shims for Pro-Line’s Performance Transmission.   Includes: Diff Gasket (2 pcs) Small Outdrive O-Ring (4 pcs) Large Diff O-Ring (4 pcs) Large Diff Shim (4 pcs) Diff Outdrive Shim (4...

This is the Hard Aluminum 64P 52T Pinion Gear from Robinson Racing. FEATURES: Aluminum construction52 Tooth64 Pitch INCLUDES: 64P 52T Pinion Gear3x3mm Set Screw REQUIRES: Installation on the Motor Shaft SPECS: Outer Diameter: 25.5mm (1")Inner Diameter: 3...