Misc.

aluminium 6061-T6 (anodized) Total weight: 103.0g Batteries and Multi-Rotor Frame SOLD SEPARATELY!!!

Revolectrix IR Meter Base Part Number: DCIR  OVERVIEW  Finally, a full-scale-production IR meter, readily available from a trusted source at an affordable price! The Revolectrix IR Meter is capable of instantaneously displaying Pack...

OVERVIEW   Protect and transport your Polaron charger and power supply with the Graupner Polaron Carrying Case.  The sturdy yet lightweight aluminum structure makes it easy to bring with you the power you need and it is roomy enough for all...

The Hot Racing aluminum battery tray set with receiver box mount enables your Arrma to be setup with either 6S or 8S LiPo battery arrangements. The kit is compatible with 1/8 BLX Arrma vehicles, including the: Kraton, Outcast (6S), Senton, Talion, and...

Key FeaturesBattery checker with built in cell balancingAdvanced Servo testing feature helps with model setupSpektrum Smart battery technology allows users to take advantage of Smart Battery featuresEasy to read full color displayQualcomm 3.0 compatible...

OVERVIEW   Control your Polaron EX, Polaron EX1400 or Polaron PRO using the Graupner wireless LAN module with your Smartphone or Tablet. All functions such as charging, storage and battery profile can be easily set using your mobile device after...

Want to run lithium batteries for more power and longer run times but don’t want to have to buy an expensive Llthium charger? At a Glance The Lithium Charge Converter will allow you to charge a lithium battery with a charger you...

This high speed, opto-isolated, PC USB interface module is designed to provide safe, 2-way communication between Revolectrix products and a PC USB port. For use with free PC software, supports firmware updates, and PC compatible GUI software for...

.

Description: Use this adjustable battery mount to fine tune the front and rear weight balance of your Xray T4! Both front and rear mounts can be adjusted independently, secure your LiPo with the hook & loop included! Feature: For: Xray...

This is the 2014 spec SWB Chassis & Battery Door from Arrma.FEATURESFits all Short Wheelbase (SWB) 2014 ARRMA 1/10 2WD vehiclesTough composite materialSpecially designed battery door for easy access to batteryPurpose designed mounting holes for the...

.

.

Water Proof, Tough PowerLab Carry Case; Size: 16cm H x 24cm W x 26cm L;Fits both PowerLab 6 & 8 (EC5 versions) along with extra compartments for connectors and batteries. NOTE: The REVOBAG is large enough to fit the PowerLab 6 with the MPA. This bag...

Key Features Identifies the performance of each cell in a Lipo pack by reading the Voltage draw Checks and displays the voltage of the overall pack, then each cell individually up to 6S Digital display Test voltage range: 6V ~...

OVERVIEW   Simply and easily connect the Graupner Battery Load Tester to a receiver switch charge lead with the female connectors and flying lead.  Be able to check instantly on the battery with the external charge socket, clearly shown on...

OVERVIEW   Charge your transmitter or receiver battery with the Graupner JR-type Charge Cable.  Made from high-quality wire and gold-plated terminals for superior point-contact resistance. INCLUDES     2 12in cables: 1ea...

Super light weight lipo hold set for the 22-4 2.0 and 1.0 buggies.The carbon fiber tab holds normal shorty packs securely but thanks to the simple design only weights 2.8grgr including the hardware.To remove the lipo simply loosen the supplied screw and...

SPA is a Signle-Port Safe Parallel Adapter for charging one pack at a time or safely interconnecting same-cell-count LiPo batteries in parallel via daisy-chaining. This version supports LiPo batteries with JST XH compatible balance connectors and...

Battery holder, 6-cell (assembly includes: on/off switch/RTS contacts/ wires to RTS motor and to receiver “battery in”)

FEATURES: Constructed of woven nylon with hook and loop material Superior holding power and durability without relying on grommets or screws to hold straps in place INCLUDES: Two 8.5" (216mm) Straps One 16.5" (419mm) Strap

Our Lipo Safe Pockets were designed to be the perfect size and shape to fit a single Lipo battery and help minimize clutter in your work area. This model (5" x 2.5" x 2") was made to accommodate standard 3S Lipos (hence the 3 in the product name) up to...

FEATURES: Fabric construction, black in color Adjusts to fit a wide variety of R/C car batteries Hook and loop closure INCLUDES: Two 10.5" (267mm) long straps One 18.5" (470mm) long strap  

Pro Synchronous Jumper Cable Set for iCharger 308DUO & 406DUOCustom Cable allows you to charge a single Lipo Pack at a Hi Amp Rate on the iCharger 308 or the 406Cable is size to fit the 308/406Black wire braid 

Racer's Edge new USB charger allows up to four 1S LiPo packs from Blade or E-Flite to be charged simultaneously from a mobile charger, device charger, computer or automotive USB outlet. Never wait to fly your micro or nano quad or aircraft again!

Description: Protect yourself and your gear whilst charging LiPo batteries with this LiPo Safety Bag! Made from Flame retardant materials to control any accidents that may happen. Fit up to three standard 2s batteries into this bag whilst...

Secure and lightweight carbon fiber hold down tabs for hard case lipo batteries. Great when combined with some alloy posts or spacers to hold down your lipo packs instead of flimsy tape or bulky straps.Can be adapted for use in 1/10 on road and off road...

Length: 0.6 in (15.8mm) Height: 1 in (26.3mm) Width/Diameter: 0.3 in (8.2mm) Weight: 1g (0.04 oz) Protect your batteries in style with Venom XT60 battery cap protective covers...

.

.

.

Battery charger temperature sensor Ni-MH batteries. It plugs into a dedicated charger port and allows you to specify a battery limit temperature at which charging will stop. Can also be used to monitor battery temp during charging. Monitor battery temp...

This part fits the following vehicles: ProLite 4x4 ProRally ProSC 4x4

.

.

.

Extend the investment and add versatility of your Tamiya-style plug equipped charger by charging EC3 batteries with this adapter Features Use this adapter to charge a battery with an EC3 connector on a charger equipped with a...

Free yourself from the stock DJI Phantom 2 battery charger with this Venom DJI Phantom 2 Battery Charge Lead. This wire harness is typically used to connect a battery charger that has female banana connector ports for its power output. Packaged in poly...

 Assortment of Heat Shrink Tubing from Dubro.FEATURES: Designed to shrink up to 1/2 of its original size          Ideal for insulating electrical splices, covering electrical...

The new Scorpion Lock Straps feature a revolutionary non-slip coating on the inside surface that securely locks your battery in place and prevents them from shifting, even during the most radical 3D aerobatic maneuvers. These Medium size straps are...