5T

68.5mm shock body length with 32mm boreIncldues shock body, Spring Adjuster Collar and O-RingBodies made from hgih grade 7075-T6 Aluminum

Losi Spur Gear, Center Diff, 62T: 5T, MINI WRC LOS352001 is compatible with LOS05014T1, LOS05014T2

Made from strong alluminum alloy materialFor use with the 5IVE-TE 3.0 onlyIncludes Center Diff Motor Mount and Motor mount block

New Screwless Side mounting latch postMade from 6061-T6 AluminumIncludes 4 posts

Made from strong alluminum alloy materialFor use with the 5IVE-TE 3.0 onlyIncludes Center Diff Motor Mount plate only

Made from high quality PolypropyleneOptional white colorImpact absorbing and highly durable

Losi Clutch Mount with Bearings and hardware: 5ive-T 2.0 LOS252094 is compatible with LOS05014T1, LOS05014T2

Made from high quality composite materialFor use with 5IVE-T 3.0Includes Rear Upper and Lower bumper braces, rear bumper, Spare Tire Mount and wing nut

Sand Storm Front Tires for Losi and Baja 5T/SCNew design to the original Sand Storm sand tire available now with a single turning rib to help with better steering. Fits the HPI Baja 5T/SC and Losi...

Compatible only with 5IVE-T 3.0 cageMade from strong composite materialIncludes Latch, Base, Latch Side, Bushing, Bushing Washer Handle and springs

Made from high quality aluminum alloyCompatible with ALL 5IVE variantsMaintains proven suspension geometry

Losi LED Light Bar Front: 5ive-T 2.0 LOS251074 is compatible with LOS05014T1, LOS05014T2

Compatible with ALL 5IVE variants using the 2.0 steering rackIncludes the steering bar, bellcrank pivot tubes and bump steer spacersIncluded hardware: (2)M5 Nylock Nut, (2)M5x35 button head screw,...

Made from high quality PolypropyleneOptional White Left and Right Rear Fender PanelsImpact absorbing and highly durable

Made from strong composite materialComaptible only with new 5IVE-T 3.0 cageIncludes Rear cross bar cage down tube and cross bar body mount

Made from strong composite materialFor use with 5IVE-T 3.0 cageAll new cage design

Made from high quality composite materialFor use with 5IVE-T 3.0Includes Front Hood Cage Crossbar, Front window cage crossbar, and roof cage crossbar

Made from strong composite materialFor use with 5IVE-T 3.0 cageAll new cage design

.

New 43T ring gear that must be used with 12T pinion: LOS-3647Optimized gearing for new larger 5IVE-T 3.0 tiresMade from high grade alloy steel

Compatible with ALL 5IVE-T variantsMade from strong steel alloyIncludes 2 of each of the folloing sizes: 6mm x 99mm, 6mm x 112mm, 6mm x 87mm

Compatible with 5IVE-T 2.0 and 5IVE-T 3.0 variantsMade from strong alloy steelIncludes 2 dogbone couplers

Made from strong composite materialCompatible with ALL 5IVE variantsIncludes shock bushings, lower shock cap, spring cups, rod ends, shock shaft bushing, guide and lower pivot balls

TLR251012 Steering Draglink & Hardware - Long & Short for 5B/ 5T/ MINI WRC

Includes the Spare Tire and and Rear Cage MountMade from high quality composite materialRear cage mount can be used with older 5IVE-T models (Spare Tire Heel is for 3.0 models only)

Compatible with ALL 5IVE variantsMade from strong alloy steelIncludes 2 outdrives and outdrive pins

Compatible with ALL 5IVE variantsMade from strong steel alloyIncludes 2 outdrives and outdrive pins

Made from aircraft grade aluminumCompatible with ALL 5IVE variantsIncludes the C and D rear hinge pin braces

Compatibale with ALL 5IVE variantsIncreased length for use with larger 32mm shocksMade from strong alloy steel

.

Made from high quality composite materialCompatible only with the 5IVE-TE 3.0Includes the ESC mounting tray, switch mount and IC5 plug holders

Compatible with the 5IVE-TE 3.0 onlyNew electric center diff mount with bearing inserts for easy access center diffHas to be used with 5IVE-TE 3.0 Motor Plate LOS-3690

Compatible with ALL 5IVE variantsIncludes 4 suspension arm and 2 rear hub hinge pinsMade from Strong Steel Alloy

Compatible with ALL 5IVE variantsIncludes all seals and O-Rings for 4 shocksIncludes 4 shock boots

New Motor mounts slugs specifically designed for the 5IVE-TE 3.0 with uniiqe shapeMade from 6061-T6 AluminumIncludes 4 mounting inserts and hardware

New Motor mounts slugs specifically designed for the 5IVE-TE 3.0 with uniiqe shapeMade from 6061-T6 AluminumIncludes 4 mounting inserts and hardware

Includes Servo Saver Tube, Nut and rubber elastomerCompatible with 5IVE-T 3.0 chassisNew elastomer design provides a much more consistant steering feel

Compatible with ALL 5IVE variantsHigh quality rubber sealed 12x24x6mm bearingIncludes 4 pieces

Replacement Cooling Fan, 50mm w/Losi Fan Cover (2): 5IVE-TEIncludes 2 40x40mm cooling fansIncludes 2 Losi Fan Cover PlatesIncludes fan mounting hardware

New Motor mounts slugs specifically designed for the 5IVE-TE 3.0 with unique shapeMade from 6061-T6 AluminumIncludes 4 mounting inserts and hardware

New Motor mounts slugs specifically designed for the 5IVE-TE 3.0 with unique shapeMade from 6061-T6 AluminumIncludes 4 mounting inserts and hardware

Compatible with ALL 5IVE variantsMade from strong composite alloy materialIncludes 2 Sun Gears, 4 Spider Gears and all shims

New Motor mounts slugs specifically designed for the 5IVE-TE 3.0 with uniiqe shapeMade from 6061-T6 AluminumIncludes 4 mounting inserts and hardware

New Motor mounts slugs specifically designed for the 5IVE-TE 3.0 with uniiqe shapeMade from 6061-T6 AluminumIncludes 4 mounting inserts and hardware

Compatible with ALL 5IVE variantsMade from strong alloy steelFor use with LOS-3657 axle boot set

Compatible with ALL 5IVE-T variantsMade from high grade steel alloyIncludes 1 F/R drive shaft, cv coupler and coupler pin

New Motor mounts slugs specifically designed for the 5IVE-TE 3.0 with uniiqe shapeMade from 6061-T6 AluminumIncludes 4 mounting inserts and hardware

Made from Strong Alloy Steel8mm "D" shaft pinion gear14T Mod 1.5 Pitch

Made from Strong Alloy Steel8mm "D" shaft pinion gear15T Mod 1.5 Pitch

Made from Strong Alloy Steel8mm "D" shaft pinion gear18T Mod 1.5 Pitch

Made from Strong Alloy Steel8mm "D" shaft pinion gear13T Mod 1.5 Pitch

Made from Strong Alloy Steel8mm "D" shaft pinion gear20T Mod 1.5 Pitch

Made from Strong Alloy Steel8mm "D" shaft pinion gear21T Mod 1.5 Pitch

.

.

.

Compatible with all 5IVE variantsMade from strong composite materialIncludes 12 Rod ends

Compatible with older TLR booted stub axles: TLR252003Made from high quality rubberIncludes 4 axle boots and mounting rings

Compatible with ALL 5IVE variantsIncludes 3.0mm, 3.5mm and 4.0mm Front and Rear Sway BarsSway bars are marked with laser etching for easy identification

Compatible with ALL 5IVE variantsMade from strong composite materialIncludes Left and Right Rear Hubs

Made from aircraft grade aluminumCompatible with ALL 5IVE variantsIncludes 4 wheel nuts

Made from strong alloy steelCompatible with ALL 5IVE variantsIncludes 2 steering posts

Made from strong composite materialFits Full size large scale servoIncludes the mount and brake brace

Compatiable with all 5IVE variantsMade from durable rubber materialIncludes 4 shock boots

Compatible with ALL 5IVE variantsMade from strong composite materialIncludes Diff Housing, Gasket, O-Rings and gear mounting hardware

12T pinion gear must be used with new 43/12 ring gear: LOS-3655Made from high grade steelOptimized gearing for new larger 5IVE-T 3.0 tires

Droop Screws are compatible with ALL 5IVE variants. The chassis stops are only compatible with 5IVE-T 3.0 chassisIncludes 4 droop screws and 4 chassis stop screwsMade from high grade alloy steel

Made from strong composite materialCompatible with 5IVE-T 3.0New composite dual sided servo saver designed for use with new elastomer servo saver spring

For use with 5IVE-T 3.0 CageMade from high quality nylon materialIncludes Left and Right window nets

Compatible with ALL 5IVE variantsHigh quality rubber sealed 9x20x6mm bearingIncludes 4 pieces

.

.

.

LOS252104 Engine Mount Insert and Screws 20.5T, Black (5): 5ive-T 2.0 (fits 62T spur) 

Compatible with ALL 5IVE variantsMade from Strong Steel Alloy97mm length

All new Rear Springs designed for the 5IVE-T 3.0 32mm shocksIncludes 2 rear springsOrange Spring = 13.1 lb spring rate

All new Rear Springs designed for the 5IVE-T 3.0 32mm shocksIncludes 2 rear springsBlue Spring = 10.4 lb spring rate

All new Rear Springs designed for the 5IVE-T 3.0 32mm shocksIncludes 2 rear springsRed Spring = 11.3 lb spring rate

Compatible with ALL 5IVE variantsIncludes steel alloy cross pins and support blocksIncludes Diff Gasket, (2)O-rings and (4)M4x20mm flat head screws

Compatible with ALL 5IVE VariantsWheel wrench also doubles as a shock tool to hold the shock bodyIncludes Wheel/shock body wrench, Shock Top and Rod End Tool, and Multi Wrench

Compatible with ALL 5IVE variants using the 2.0 steering rackHigh quality rubber sealed 6x10x3mm bearingIncludes 4 pieces

Compatible with ALL 5IVE Variants (Top Side Button Only Included)Includes 26 Body ButtonsMade from high grade composite material

All new front Springs designed for the 5IVE-T 3.0 32mm shocksIncludes 2 front springsRed Spring = 12.3 lb spring rate

All new front Springs designed for the 5IVE-T 3.0 32mm shocksIncludes 2 front springsOrange Spring = 14.2 lb spring rate

Losi Brake Pad Hardware Set: 5ive-T 2.0 LOS252095 is compatible with LOS05014T1, LOS05014T2

Made from strong composite materialCompatible with ALL 5IVE variantsIncludes covers for A,B,C,D hinge pin braces

For use with new, larger 32mm Big Bore 5IVE-T 3.0 shocksTapered design for Improved performance with increased pack and faster reboundIncludes four 2.1mm x 6 hole tapered pistons

For use with new, larger 32mm Big Bore 5IVE-T 3.0 shocksTapered piston design for improved performance with increased pack and faster reboundIncludes four 2.2mm x 6 hole tapered pistons

For use with new, larger 32mm Big Bore 5IVE-T 3.0 shocksTapered piston design for improved performance with increased pack and faster reboundIncludes four 2.0mm x 6 hole tapered pistons

For use with new, larger 32mm Big Bore 5IVE-T 3.0 shocksTapered piston design for improved performance with increased pack and faster reboundIncludes four blank tapered pistons with 12 dimple hole...

Made from strong alluminum alloy materialFor use with the 5IVE-TE 3.0 onlyIncludes Center Diff Motor Mount plate only

Losi Gear Mesh and Brake Braces: 5ive-T 2.0 LOS251075 is compatible with LOS05014T1, LOS05014T2

For use with new 5IVE-T 3.0 Cage workTeather attaches to the cage so you don't lose body clipsIncludes 4 teathers and body clips

Made from Strong Steel AlloyM4x40mm button head screwsIncludes 10 pieces

Made from Strong Steel AlloyM6x30mm button head screwsIncludes 10 pieces

Made from Strong Steel AlloyM4x50mm button head screwsIncludes 10 pieces

Made from Strong Steel AlloyCompatible with ALL 5IVE variantsIncludes RH and LH thread lower shock mounting screws

Made from high quality alloy steelCompatible with all 5IVE variantsIncludes (6)10x20x0.5mm, (16)5x10x0.3mm, (2)9x13x0.2mm shims

Made from Strong Steel AlloyM5x35mm button head screwsIncludes 10 pieces

Compatible with ALL 5IVE variantsIncludes 2 axle cv couplings and 2 CV pinsMade from high grade steel