SCT410

EATURES: Stock rear hinge pin braces for the Tekno RC EB48 buggy, optional for the SCT410 short course truck 7075 aluminum construction, gun metal gray in color INCLUDES: Two Adjustable Rear Hinge Pin Braces

FEATURES: Hardened steel construction Used with the parts listed below to convert the SCT410 into a full spec super lightweight 1/8th scale buggy INCLUDES: Two each Adapters, Stub Axles, 17mm Hex Nuts, Pins and Set Screws (two adapter sets are required...

FEATURES: CNC machined aluminum construction, gun metal gray in color 0.176oz (5g) lighter than the stock insert INCLUDES: Motor Mount Insert for the Tekno RC ECB48 and SCT410

FEATURES: Hardened steel construction Drilled for lighter weight than stock diff outdrives For front, center and rear application INCLUDES: Two Lightened Differential Outdrives

FEATURES: Constructed of 7075 aluminum, black in color INCLUDES: Front Shock Tower  

FEATURES: Hardened steel construction INCLUDES: One each Front and Rear Driveshafts

FEATURES: Aluminum construction INCLUDES: Two Shock Caps

These are the new pin design from TEKNO RC, these pins fit in the same differential case as the EB48 and SCT410. They do require the new differential gears TKR 5150 to be compatible in the EB48. These new Pins are bigger in diameter, we did this so...

FEATURES: Plastic construction, black in color Functions as servo tray and also holds right nerf bar in place INCLUDES: Radio Tray and Right Mud Guard

TKR5569 – 17mm Narrow Wheel Hubs (for TKR5580 axles, lightened, w/pins, 2pcs)These wheel hubs are used to narrow the track width of the EB48SL, which results in a nimbler handling buggy.  This works best on smaller tight tracks where maximum...

FEATURES: Composite plastic construction INCLUDES: Two Front Gearbox Halves

.

FEATURES: Aluminum construction Threads onto shock body to compress or loosen shock spring INCLUDES: Two Rear Shock Adjustment Nuts

FEATURES: Anodized aluminum construction, gun metal gray in color INCLUDES: Two Shock Cartridge Caps  

FEATURES: Constructed of woven nylon with hook and loop material Superior holding power and durability without relying on grommets or screws to hold straps in place INCLUDES: Two 8.5" (216mm) Straps One 16.5" (419mm) Strap

FEATURES: Hardened steel construction INCLUDES: Two Steering Link Turnbuckles

FEATURES: Hardened steel construction INCLUDES: Three small and two large Differential Gears

TKR8104 – Bell Cranks and Top Plates (requires TKR8100, EB/NB/ET/NT/SCT/MT)TKR8104 includes several all new parts to improve steering response and support the TKR8100 Ackermann plate. New bell cranks accommodate the extended mounting locations for the...

FEATURES: Hard anodized aluminum construction Saves 1.7g of weight over the stock steel bushings without sacrificing durability INCLUDES: Four Aluminum Arm Bushings

FEATURES: Constructed of aluminum, gun metal gray in color INCLUDES: Steering Servo Brace

FEATURES: 0.16" (4mm) diameter polished hardened steel construction INCLUDES: Two Front Shock Shafts

FEATURES: Hardened steel construction Fits front and rear suspension INCLUDES: Two Inner Hinge Pins

FEATURES: Aluminum construction Replaces stock steel 6.8mm stabilizer balls INCLUDES: Four 6.8mm Stabilizer Balls

FEATURES: Constructed of aluminum, gun metal gray in color INCLUDES: Servo Saver Post

FEATURES: 1mm thick plastic construction Helps to keep unwanted air out of the body during high speed Offers greater stability during cornering and jumping INCLUDES: Left and Right Air Control Guards with eight 3x8mm Screws  

FEATURES: Steel construction INCLUDES: Two Left and Right Outer Rear Hinge Pins Four 2.5mm Locknuts

FEATURES: Plastic construction Compatible with the standard build of shocks with the bleeder hole on the side, emulsion style with a screw in the cap, and vented build with a hole in the top of the cap and side with a bladder INCLUDES: Two Shock Caps,...

TKR5263 – Split Cntr Diff Mount (composite, requires TKR5260, EB/ET/SCT/SL)This is an inexpensive way to put a split center diff mount on your EB/ET/SCT/SL vehicle.  These composite parts come standard on the SCT410.3 and EB48 SL and require the...

FEATURES: For the inside of steering blocks and rear hub carriers of the Tekno RC SCT410 INCLUDES: Four 10x15x4mm Ball Bearings SPECS: Inner Diameter: 10mm Outer Diameter: 15mm Thickness: 4mm

FEATURES: Made of black plastic and steel INCLUDES: One differential case SPECS: Diameter: 28mm (1-1/8") Length: 25mm (1") Mounting hole, center to center of diff: 11.5mm (7/16") diameter: 3.0mm (1/8") Center shaft, outer diameter: 8.0mm (5/16") inner...

.

FEATURES: For the outside of steering blocks and rear hub carriers of the Tekno RC SCT410 INCLUDES: Four 6x12x4mm Ball Bearings SPECS: Inner Diameter: 6mm Outer Diameter: 12mm Thickness: 4mm

.

.

Product DescriptionTKR8730 – Shock Cap Bushings (4pcs, requires TKR8727)Increase the life of your shock caps with these new shock bushings! They are designed to snap in and key with the top surface, making it virtually impossible for the bushing to...

FEATURES: Steel construction Fits front or rear suspension 2.4mm diameter INCLUDES: Front and rear Swaybar