Electric Motors & Acc.

FEATURES: ESC (TKPM0010);Ideal for 1/10 scale 2WD and 4WD buggies, 2WD stadium truck and2WD short course vehiclesBlinky mode flashing LED signifies ROAR-legal setup for stock classracingProgrammable Drag Brake, Low Voltage Cutoff, Start Power, DriveMode,...

 This is the Arrma BLX185 6S 150A Electronic Speed Control. FEATURES: Can be powered by two 3-6S (11.1-22.2V) LiPo batteries, 35C 5000mAh minimum requirement 6.0V/3A continuous output, 12A max Bridge connector for using single 4S or 6S...

Specs BEC Voltage: 6V Continuous Current: 130A Drive Type: Forward/Reverse Full On Resistance: 0.0004 ohm Height: 1.41 in (36mm) Input Connector Types: EC3 Input Voltage: 6-9 cells NiMH, 2-4S LiPo - LiFe Length: 2.1 in (53.5mm) Maximum Burst...

Product Description Key Features Small footprint for easy installation in 1/10 and 1/12-scale RC vehicles Sensored brushless technology provides improved top speed and torque with smooth, cog-free acceleration Timing Mode provides peak...

This is the optional Pro Sintered 12.5mm Rotorfor the Hot Bodies Flux PRO Competition Brushless Motors.   FEATURES More powereful magnets than stock rotors offer increased torque forfaster acceleration, and greater RPM for higher top...

This is the TQ Wire 25' roll of 10 Gauge Wire with Blue Insulation. FEATURES: Version 2 10 gauge wire constructed from 1,050 strands of tinned copper Ideal for high current 1/8 scale and high voltage short course power systems Very flexible and easy to...

This is the TQ Wire 25' roll of 10 Gauge Wire with Yellow Insulation. FEATURES: Version 2 10 gauge wire constructed from 1,050 strands of tinned copper Ideal for high current 1/8 scale and high voltage short course power systems Very flexible and easy to...

FEATURES: Compatible with 550 size motors down to 12 turns and powered by a 2S LiPo or a 6-cell NiMH battery, or an 18 turn & above 550 size motor with 3S LiPo or 9-cell NiMH battery power Aliminum heat sink, red in color INCLUDES: Arrma Mega 12T ESC...

FEATURES: 16 gauge 665 strand copper wire with thin wall silicone insulation Extremely flexible, will not tweak INCLUDES: 50'(15.2m) roll of 16 Gauge Wire with Yellow Insulation

.

OVERVIEW Our 35T Single Matrix Pro motor features large solder tabs and a vented can for efficiency, and has been tuned for an excellent power curve specifically designed for rock crawling. FEATURES: Low speed motor for lathe...

FEATURES Compatible with TrakPower MS series ESCsPlugs into USB port of user's PCFour basic programming screens; Settings, Throttle, Timing andBrakesAllows changing low voltage cut off pointsFine tune boost and turbo timingCoast and throttle curve...