USB Connectors / Adapters / Programmers

This is the Tekin Hotwire 3.0 Bluetooth ESC Interface.       FEATURES Runs on the following platforms; Bluetooth: -Android 4.3 & UP - iOS 8 & UP (iPhone 4S and iPad2 or...

Blackbox PROgrammer 2 With the PROgrammer2, select between Forward/Brake or Forward/Brake/Reverse mode and adjust the BEC output voltage depending on the type of servo used and desired servo speed. Adjust the desired low voltage cutoff or disable it...

FEATURES: Allows modeler to set up their Tekin ESC through a PC interfaceOperates on the following Windows platforms;Windows XPWindows Vista (32 bit and 64 bit)Windows 7 (32 bit and 64 bit)Windows 8* (32 bit and 64 bit) *requires .NET 3.5Also operates...

Program and firmware update Maclan Racing ESC Compact pocket size design Wrist strap, programming cable, and USB cable included

Working Modes: 1 Works as an individual device to set the ESC, the value of each parameter is displayed on the LCD screen.  2 Works as an USB adapter to link the ESC with a PC to update the firmware of the ESC or set the ESC byHOBBYWING USB LINK...

Setting up all parameters of your ESC made easy with this digital programmer.The bright LCD screen let you run through all the programs and within seconds the values have been changed. This programmer can also be used as interface between your PC and the...

FEATURES: Programs Castle car controllers without a computer          Works as a complete USB Castle Link with your computer          Works with all Castle Link...

FEATURES: Installs between ESC and receiver          Y-harness with wire to connect to Castle Link          Can leave connected for easy access for Castle Link...

This is the Castle Link Quick Connect Duo from Castle Creations. FEATURES Installs between ESC and receiver and prevents loss of settings when unplugging Castle controller from...

Key Features Provides easy access to programming parameters Compatible with DYN4850, DYN4940, DYNS2416, DYNM3875, DYN4955 and DYNS2641 Dynamite Brushless ESCs Overview Unlock the potential of your Dynamite Brushless ESC with the...

Description:This is a Yeah Racing Hacktronic Firmware Update USB Cable for the Hacktronic ESC. This Cable can be used to update firmware to the latest version as well as switching your ESC program to Touring, Crawler and Drift on demand.Feature:For:...

ESC Program Card

FEATURES Connects ESC to programmer INCLUDES Wire Extension SPECIFICATIONS Length: 8" (203mm) not including connectors

HotWire Adaptor for use with the Tekin RXS, RX8G2 and RSG2 ESCs.FEATURES: Plugs between the ESC and the HotWire and allows the HotWire PC            interface to be used with the electronic speed...

FEATURES Black plastic     INCLUDES Two hex adapters Six M5x3mm flathead screws with socket for 2mm hex wrench     ...

FEATURES Fits the rear of 1/8 scale buggies and truggies such as the Team Associated SC8E, and the HPI Apache Flux "Roll to Set" system uses the geometry of the car against the grip of the tire to lock...

FEATURES Fits the rear of the Team Associated B4.2 and B44.2, and the Losi 22 "Roll to Set" system uses the geometry of the car against the grip of the tire to lock the wheels into the proper position...

FEATURES Fits the front of the Team Durango DEX410 V3, DEST210, and the Xray XB4 "Roll to Set" system uses the geometry of the car against the grip of the tire to lock the wheels into the proper...

50cm length - Adapter cable for Android phones with type-c USBfor directly plugging phone in to your MMAX esc for programming and firmware updates. (i.e., Galaxy S8, S9, S10, and later model LG phones)

 

.