SCT410.3

Product DescriptionTKR5288 – Chassis (black anodized, lightened, EB/SCT/SL)This is the stock chassis for the SCT410.3 and EB48SL.  It is a nice upgrade from the original SCT410 chassis and a less expensive alternative to the CNC 7075 lightened and...

This is the optional CNC Split Center Diff Mount for the Tekno RC SCT410.3 and EB48SL. FEATURES Constructed of aluminum, black in color Replaces the TKR5263 composite diff mounts ...

TKR5584 – Shock Tower (rear, 7075, black ano, SCT.3/SL)This is the stock rear shock tower for the SCT410.3 and EB48SL.  It is 6mm lower than the original SCT410 shock tower and should only be used with TKR5515 rear suspension arms for the SCT410.3...

TKR5569 – 17mm Narrow Wheel Hubs (for TKR5580 axles, lightened, w/pins, 2pcs)These wheel hubs are used to narrow the track width of the EB48SL, which results in a nimbler handling buggy.  This works best on smaller tight tracks where maximum...

TKR5545B – HRC Rear Hubs (L/R, CV or uni, SCT.3/SL)By lowering the hinge pin location compared to the stock rear hubs (TKR5545), we have raised the rear roll center in just the right place. Use these hubs to increase on power traction and stability while...

Product DescriptionTKR5188B – Rod Ends (hard, 6.8mm, M4 thread, SCT/SL, 8pcs)These are the stock rod ends for the SCT410.3 and EB48SL.  They are lighter than the original TKR5051 rod ends and require TKR5123 turnbuckles (with M4 thread) to install...

TKR5263 – Split Cntr Diff Mount (composite, requires TKR5260, EB/ET/SCT/SL)This is an inexpensive way to put a split center diff mount on your EB/ET/SCT/SL vehicle.  These composite parts come standard on the SCT410.3 and EB48 SL and require the...

TKR5545 – Rear Hubs (L/R, CV or uni, SCT410.3/EB48SL)This is a set of rear hubs for the SCT410.3 and EB48SL.  They are compatible with the original SCT410 only if you are using the SCT410.3/EB48SL rear arms (TKR5515).  These hubs have 0 degrees...

TKRBB06135 – Ball Bearings (6x13x5mm, 4pcs)SCT410.3 and EB48SL bearings for outside of steering blocks and outside of rear hub carriers. 4pcs required in kit.

These rear skid plates are for the Tekno RC EB48/48.3/48SL / ET48/48.3 / NT48 / SCT410/410.3.