Connectors / Adapters / Wire

BUMP is an exclusive new Revolectrix concept for Battery Management. The BUMP Controller utilizes Near Field Communication (NFC) Technology to communicate with any battery equipped with a BUMP Compliant Tag, or "BumpTag". The BumpTags are pre-installed...

MPA is a Multi-Port Safe Parallel Module for safely interconnecting same-cell-count LiPo batteries in parallel; also supports RX NiCds. This version supports LiPo batteries with JST XH compatible balance connectors and wiring. The MPA board has Deans...

.

.

Deans Male Ultra Plug with Pigtail ten pack.FEATURES: Eliminates the possibility of reverse polarity connections          Provides secure connection for battery and motor...

Pack of the Female Half of the Deans 2-Pin Ultra Plug.  It comeswith 5" of 12 gauge wire and is Designed to be Used On Battery Packs for R/CCars and Trucks.INCLUDES: Ten Female Connector with  5" Wire "pigtail"

Quantity of 24, formatted, blank BUMPTags for the Revolectrix BUMP Controller.  This specially-formatted, adhesive backed tag, is the only BUMP-Compliant NFC tag that will work with the BUMP Controller.  Do not attempt to use other NFC tags...

High Grade, 12 Gauge Wire Useable in R/C Products                           To Carry High Currents.FEATURES: 12 Gauge Wire...

High Grade, 12 Gauge Wire Useable in R/C Products                            To Carry High Currents.FEATURES: 12 Gauge...

High Grade, 12 gauge Wire Useable In R/C Products To Carry High                           Currents Of Electricity.FEATURES:...

High Grade, 12 Gauge Wire used in R/C Products To Carry                         High Currents of Electricity.FEATURES: 12 Gauge Wire...

High Grade, 12 Gauge Wire used in R/C Products To Carry                        High Currents of Electricity.FEATURES: 12 Gauge Wire has...

High Grade, 12 Gauge Wire used in R/C products to carry                        High Currents of Electricity.FEATURES: 12 Gauge Wire has...

FEATURES: Eliminates the possibility of reverse polarity connections           Low resistance, compact size           Provides a secure connection for battery and...

These are the battery connectors battery side only. For the device side of the connector you would want SPMXCA314 (sold separately).

These are the battery connectors device side only. For the battery side of the connector you would want SPMXCA313 (sold separately).

This is the 1S/2S iCharger Switched Balanced Cable Assembly from TQ Wire. FEATURES Enables user to switch between 1S and 2S charging Installs between the #2620 2-Cell Charge Cable and the...

Description2S complete charge cable with black XT60 connector for charger. This cable will work with the iCharger X6, SkyRC B6, ISDT and others with XT60 output and XH balance port.This new cable has the same features found in our standard 2S cable like...

1S PRO Charge Cable with 5mm Battery Bullet ConnectorsSPECS:24" long1 Cell Lipo readyWorks with all high end chargersNew Hi-Amp gold plated 4mm bullets on charger side for a tighter fit and higher amp carrying capacityNew Hi-Amp gold plated 5mm bullets...

2S PRO Charge Cable with 5mm Battery Bullet ConnectorsSPECS:24" long2 Cell Lipo readyWorks with all high end chargersNew Hi-Amp gold plated 4mm bullets on charger side for a tighter fit and higher amp carrying capacityNew Hi-Amp gold plated 5mm bullets...

4S Pro Charge Cable with Deans Battery ConnectorSPECS:24" long4 Cell Lipo readyXH Balance LeadWorks with all high end chargersNew Hi-Amp gold plated 4mm bullets on charger side for a tighter fit and higher amp carrying capacityHi-Current Deans battery...

.

SPECS:24" long2 Cell Lipo readyXH Balance LeadWorks with all high end chargersNew Hi-Amp gold plated 4mm bullets on charger side for a tighter fit and higher amp carrying capacityHi-Current Deans battery Connector on battery sideBlack wire braid, covers...

Known around our office as the "giant squid", this charge adapter is an absolute must for your store's service department and for experienced, diversified consumers. Includes the following plugs to address most any charging requirement: Futaba TX, JR TX,...

Introducing our latest 2S complete charge cable with molded strain relief. This new cable has the same features found in our standard 2S cable like 12 gauge wires wrapped in black nylon mesh; our #2511 stepped bullets so you can charge both 4mm and...

Description2S complete X6 iCharger cable with low profile tubes for input to charger.This new cable has the same features found in our standard 2S cable like 12 gauge wires wrapped in black nylon mesh; our #2511 stepped bullets so you can charge both 4mm...

Tuning Haus delivers a new, longer robust wiring solution for owners of the popular iCharger series, as well as many other brands. The main leads are 915mm (36") long and constructed from premium 10AWG silicone wire. The convenient double-sided bullet...

.

.

Powerpole Connectors are designed for use where repeated connect-disconnectcycles and low resistance are required between batteries, motors, etc... INCLUDES: Ten Red ConnectorsTen Black ConnectorsTwenty Silver ContactsOne Instruction Sheet FEATURES:...

60cm length - 4mm/5mm step down connectors for different Li-Po packs - Fits chargers that use 4mm bullet charging inputs - 12AWG cables- Specifically design for charging with 2S or 4S Li-Po packs

.

Want to run lithium batteries for more power and longer run times but don’t want to have to buy an expensive Llthium charger? At a Glance The Lithium Charge Converter will allow you to charge a lithium battery with a charger you...

NHX One Piece Adapter is built solid! It offers NO resistance.  No more cutting wires to solder a connector.Includes:5x Adapters

Cell Count: 2~8S Balance Connector Type: XH Fuse Protect Over Current Indicator

Complete charging cables use our #2505 6-point heavy duty bullets for the charger side and our patent pending #2511 4mm/5mm stepped bullets for the battery. The cables are constructed using 12 gauge wire and XH balance plugs then covered in nylon...

Quantity of 12, formatted, blank BUMPTags for the Revolectrix BUMP Controller.  This specially-formatted, adhesive backed tag, is the only BUMP-Compliant NFC tag that will work with the BUMP Controller.  Do not attempt to use other NFC tags...

Reedy Low Profile Caged Bullets, 5x14 mm, qty 10Reedy's Low-Profile Caged Bullet Connectors feature a flat top for easy soldering and a versatile caged design that easily adapts to the slight variation in socket sizes found among different battery types...

Don't spend all day charging your batteries one at a time. This Paraboard lets you charge and balance up to six lipo batteries at once! This board features EC5 plugs for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug...

60cm length - 4mm/5mm step down connectors for different Li-Po packs - Fits chargers that use 4mm bullet charging inputs - 12AWG cables