EB410

TKR6501B – Chassis (revised, 7075, 3mm, hard anodized, lightened, ET410 EB410)Developed for the rigorous demands of the ET410, this new chassis has received improvements to increase its durability and lifespan. By making small changes to a few key areas,...

.

1 - MIP Confetti Sticker 4 - SHSS, 4-40 x 3/32" Cup Point2 - MIP Bi-Metal R-CVD Yoke, Tekno EB4102 - MIP Pucks, 17.5 Bi-Metal Bone, Rear 69mm, Tekno EB410

Tekno EB410 Wing MountMachined AluminumBlack AnodizedChamfered Silver EdgingFITS: EB410 and ET410

V2 Now accepts the optional rear universal axle sets.Heavy duty 7075 alloy rear hubs for the EB410. Omnidirectional so that they can be mounted on either side.Extra durable for high powered applications and polished and anodized in Tekno team colors...

Now with v2 Hardened steel cups that now also accepts MIP option pucks pins in addition to the stock center bones.Ultra light weight center spool set for the EB410. Greatly reduces the rotating mass of your EB410 for that extra boost in 13.5t and 17.5t...

Give your EB410 the winning 'EDGE' with our new lightweight low profile race body!Crafted to greatly lower the looks and cg over the stock body the EDGE body sits 8mm lower than the stock body. We have also taken great care to still allow the mounting of...

.

Product DescriptionTKR6608X – Body (0.5mm, lightweight, EB410)The lightweight body is 16 grams lighter than the standard EB410 body, lowering the center of gravity and improving handling characteristics. With this weight savings, you do lose some...

Precision heavy duty 7075 alloy steering crank set for the hot EB410.Reinforced alloy design eliminates the problem of the hex bearing posts stripping in the plastic cranks allowing for easier maintenance and disassembly. Includes steel bearing posts...

Tekno EB410 Rear Hubs"0" Degree6 Camber mounting holes (4 on stock hubs)2 Hinge pin locations for ride height (1 on stock hubs)Machined AluminumBlack AnodizedChamfered Silver Edging FITS: EB410 and ET410* Note Hubs will not work with Tekno's...

Tekno EB410 Aluminum Wheel HexesSet of (4) Clamping Wheel HexesIncludes HardwareMachined AluminumBlack AnodizedChamfered Silver EdgingFITS: EB410 and ET410

Specially designed brass rear weight set for the EB410.Made of brass and black coated to reduce corrosion, this weight set is designed to easily bolt on to the rear of the EB410 with an extra low profile.The main weight is 40gr and included are 2 add on...

.

.

.

TKR6582XC – Shock Tower (rear, -2mm, carbon fiber, EB410) This is the carbon fiber light weight option rear shock tower for the EB410. It is 2mm lower than the the standard shock tower providing more rear droop when used with the 1-2mm diff risers...

TKR6583C – Shock Tower (rear, CF, additional camber link location, EB410)This new carbon fiber rear tower for the EB410 provides a new option to horizontally mount your camber link positions. If you’re interested in experimenting with rear shocks in...

Heavy duty machined spur gear with alloy mounting plate for the stock EB410 center gear diff. The much stronger machined delrin spur gear reduces the chances of stripped gears and includes the machined 7075 mounting plate with hardware.The 2 piece design...

.

Product DescriptionAfter undergoing several months of race proven testing, we are pleased to release the new EB410 Aluminum Stub Axles. The new axles are CNC machined from 7075 aluminum, hard anodized for wear, and reduce the rotating mass as well as...

TKR8104 – Bell Cranks and Top Plates (requires TKR8100, EB/NB/ET/NT/SCT/MT)TKR8104 includes several all new parts to improve steering response and support the TKR8100 Ackermann plate. New bell cranks accommodate the extended mounting locations for the...

Heavy duty 3.4mm hardened steel inner hinge pin set for the EB410.Larger center section helps prevent bent or busted pins while keeping the stock 3mm diameter at the ends in order to fit the stock inserts and while also only slightly enlarging the arm...

This is the optional Tekno RC Center/Front Tapered Driveshaft. FEATURES Fits the Tekno RC EB48 and ET48 vehicles Ten grams less rotating mass than stock driveshaft 7075 aluminum construction, black...

.

.

.

.

.

.

Tekno EB410 Bulkhead Camber Saver PlateStrengthens Front BulkheadMachined AluminumBlack AnodizedChamfered Silver Edging Includes (2) Longer ScrewsFITS: EB410 and ET410

Product DescriptionTKR6514HD – Differential Outdrives (f/r/c, HD, EB410/ET410)Our new heavy-duty outdrives retain the same physical dimensions as our standard EB410 and ET410 outdrives (TKR6514) but have less material removed for improved durability and...

Tekno EB410 Center Diff BulkheadStrengthens Center of ChassisMachined AluminumBlack AnodizedChamfered Silver EdgingFITS: EB410 and ET410

One (1) set of wheels (BLACK) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

One (1) set of wheels (BLUE) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

One (1) set of wheels (GREEN) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

One (1) set of wheels (PINK) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

One (1) set of wheels (RED) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

One (1) set of wheels (WHITE) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

One (1) set of wheels (YELLOW) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).