Micro RS4

This is the HPI RF-11 2.4GHz 2-Channel Receiver. FEATURES For use with the HPI #105406 TF-11 transmitter, HPIL5406 Replaces lost or damaged receivers Uses the latest digital FHSS (Frequency-Hopping...

This is a set of Optional Steel Universal Dogbones for the HPI Micro RS4. These universals replace the stock plastic units that come with the kit. FEATURES Durable steel construction Pre-assembled...

This is the replacement stock motor for the Micro RS4 FEATURES: Leads pre-installed on motor INCLUDES: One motor w/leads, plug, and capacitors. REQUIRES: Installing into vehicle SPECS: Length: 44mm including 5mm long shaftWidth: 20mmHeight: 15mmDiameter:...

FEATURES: Rubber constructionHigh durability D compound INCLUDES: Four D-Compound Slick Tires REQUIRES: WheelsTire Glue SPECS: Width: 0.69" (17.5mm)Diameter: 1.4" (36mm)

Each one of the HPI Micro RS4 Wheel Sets includes 3 sets of wheels (3 pairs of front wheels and 3 pairs of rear wheels) - one set each of mesh, flat 5 spoke and flat 6 spoke designs.

 

This is an Aptional Hardened Steel Pinion gear for the HPI Micro RS4 vehicles. The pinion gear attaches to the motor and meshes with the differential gear. FEATURES Durable steel construction ...

This is an Optional Fardened Steel Pinion Gear for the HPI Micro RS4 vehicles. The pinion gear attaches to the motor and meshes with the differential gear. FEATURES Durable steel construction ...

This is an Optional Gardened Steel Pinion Gear for the HPI Micro RS4 vehicles. The pinion gear attaches to the motor and meshes with the differential gear. FEATURES Durable steel construction ...

This is an Optional Hardened Steel Pinion Gear for the HPI Micro RS4 vehicles. The pinion gear attaches to the motor and meshes with the differential gear. FEATURES Durable steel construction ...

This is the replacement Drift Tire Set for the HPI Micro RS4 Drift.   FEATURES Hard plastic construction, black in colorReplaces worn or damaged tires   INCLUDES Two Front TiresTwo Rear Tires   REQUIREMENTS Installation...

This is the Type B Chassis for the HPI Ken Block, and Falken Ford Mustang Micro RS4 Vehicles. FEATURES Fiberglass construction INCLUDES Type B Chassis

This is the Motor Plate for the HPI Micro RS4 On-Road Car. FEATURES Aluminum construction, orange in color INCLUDES Motor Plate

This is the Diff Pipe for the HPI Micro RS4 On-Road Car. FEATURES Aluminum construction, orange in color INCLUDES Diff Pipe ...

This is the Rear Hub L for the HPI Micro RS4 On-Road Car. FEATURES Aluminum construction, orange in color INCLUDES Rear Hub L for the HPI Micro RS4...

This is a Rear Axle w/Hex Hub for the Micro RS4. FEATURES Metal Construction Silver and Gold in Color Durable INCLUDES One Rear Axle w/Hex...

This is an Optional Hardened Steel Pinion Gear for the HPI Micro RS4 vehicles. The pinion gear attaches to the motor and meshes with the differential gear. FEATURES Durable steel construction ...

 

This is the Servo Arm Set for HPI's Micro RS4. FEATURES: Black plastic parts tree and has 12 different parts on itfor the Micro RS4. INCLUDES: #1-Front Diff Housing#2-Wrench#3-Ends from Diff#4-Part of u-joint#5-Sterring Column#6-Inner housing for...

 

FEATURES Fits the HPI Micro RS4 series of drift cars Plastic construction, two-tone green in color Matched to the officially licensed replica of the Vaughn Gitten Jr. Signature 1969 Ford Mustang RTR-X INCLUDES ...

.

FEATURES This is a chrome steel ball bearing.   INCLUDES Two 5 x 8 x 2.5mm ball bearings.   REQUIREMENTS Ball differential from HPI.   SPECIFICATIONS Inner Diameter: 5mmOuter Diameter: 8mmWidth: 2.5mm

This is the Battery Wire Connectors with Plugs for the HPI Micro RS4. FEATURES Set of battery wires with Red connectors attached. INCLUDES One set of...

 

 

.

These are the Front Shock Shafts for the Micro RS4. FEATURES Black steel construction INCLUDES Two shock shafts ...

This is the replacement 58 Tooth Solid Drive for the HPI Micro RS4 Drift FEATURES: Plastic construction, black in color INCLUDES: One 58 Tooth GearOne Gear Block REQUIRES: Installation following the model manual

This is the Urethane Bumper for the HPI Micro RS4 On-Road Car. FEATURES Replaces damaged or worn front bumpers Gray in color INCLUDES Urethane...

This is a Motor Connector for the Micro RS4. FEATURES Plastic and wire construction INCLUDES One motor connector w/a Tamiya plug on one end and a Mini...

This is the Optional Motor Wires with Plugs for the HPI Micro RS4. These are the leads that would be used for speed controls that do not use bullet-style conenctors. FEATURES Pre-installed motor...

 

 

 

These are 10 Small Chrome Body Pins by HPIThese are small body pins/clips used to secure a body to the body mount on acar chassis. INCLUDES: Ten Small Chrome Pins/clips SPECS: Pins are 20mm long.