RC10B4.2

ESS-One+ 2017 Engine Sound System Along with all the features of the earlier model, the ESS-One+ is lighter and more compact in size, making it easier to install. Redesigned speakers have more power and longer life. The D-Class amplifier chip...

Features: LiPo low-voltage cutoff protection LiPo cell auto-detect Fully proportional brakes Durable case with aluminum heat sink Pre-wired cooling fan Water-resistant Heavy duty silicone wires Low-resistance...

Improving on a successful vehicle platform is one tough chore.   JConcepts has taken on the difficult assignment in designing a heavy-duty, high response and low deflection steering assembly for the World Championship B44 vehicle...

B44 Factory Team Aluminum Hubs, 0 deg. • 7075 blue anodized aluminum hub with molded camber link tower.  • Available in 0 degree, 0.5, 1, and 1.5 degrees versions .  • Laser etched with letters to note Left or Right side and...

B44 Factory Team Aluminum Hubs, 1.5 deg. • 7075 blue anodized aluminum hub with molded camber link tower.  • Available in 0, 0.5, 1, and 1.5 degree versions.  • Laser etched with letters to note Left or Right side and toe-in...

FT Body Reamer  Make short work of creating body mounting holes! This reamer with sharp tip includes hole diameters along the tip so you know when to stop.  Features Extruded lightweight body for good grip. Hole diameters...

This part fits the following vehicles: B44 RC10B4 RC10B4.1 RC10B4.2 RC10B5M RC10B6 RC10B6 Club Racer RC10B6D RC10SC5M RC10T4 RC10T4.1 RC10T4.2 RC10T4.3 RC10T5M SC10 SC10...

This part fits the following vehicles: B44 B44.3 GT2 NTC3 RC10B2 RC10B3 RC10B4 RC10B4.1 RC10B4.2 RC10B44.1 RC10B44.2 RC10B5 RC10B5M RC10B6 RC10B6 Club Racer RC10B6D ...

One (1) set of wheels (BLACK) for use on Kyosho RB5 (front).These wheels are for the Kyosho RB5 and RB6 buggies (front). Also fits Team Associated B4.2 and B4/B4.1 with Hex Conversion, and Team Associated B6/B6D. Sets of four (4).

One (1) set of wheels (BLACK) for use on TLR 22 (rear).These wheels are for the Team Losi 22 buggy (rear). Also fits Team Associated B4.2 and B4/B4.1 with Hex Conversion, and Team Associated B6/B6D. Sets of four (4).

One (1) set of wheels (BLACK) for use on Team Associated B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6/RB6.6 (front).These wheels are for the Team Associated B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6/RB6.6 buggies (front).Sets of four (4).

One (1) set of wheels (YELLOW) for use on Team Associated B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6/RB6.6 (front).These wheels are for the Team Associated B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6/RB6.6 buggies (front).Sets of four (4).

One (1) set of wheels (BLACK) for use on Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 (front).These wheels are for the Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 buggies (front). Sets of four (4).

One (1) set of wheels (BLUE) for use on Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 (front).These wheels are for the Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 buggies (front). Sets of four (4).

One (1) set of wheels (GREEN) for use on Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 (front).These wheels are for the Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 buggies (front). Sets of four (4).

One (1) set of wheels (ORANGE) for use on Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 (front).These wheels are for the Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 buggies (front). Sets of four (4).

One (1) set of wheels (PINK) for use on Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 (front).These wheels are for the Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 buggies (front). Sets of four (4).

One (1) set of wheels (RED) for use on Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 (front).These wheels are for the Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 buggies (front). Sets of four (4).

One (1) set of wheels (WHITE) for use on Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 (front).These wheels are for the Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 buggies (front). Sets of four (4).

One (1) set of wheels (YELLOW) for use on Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 (front).These wheels are for the Team Associated B6/B6.1/B4.2/B5/B5M/B6/B6D and Kyosho RB5/RB6 buggies (front).Sets of four (4).

JConcepts has your 8/32” locking wheel nut needs covered with the Illuzion thin-pattern wheel nut set.   Specially designed for the front of the B44.1 buggy this new thin-pattern design eliminates extra weight and size,...

FT Centered ESC MountThe Factory Team Centered ESC mount allows racers to mount their ESC in the center of the car against the rear bulkhead. In addition, the Centered ESC Mount makes room underneath for the receiver when using shorter packs. These...

This part fits the following vehicles:B44B44.3RC10B4RC10B4.1RC10B4.2RC10B44.1RC10B44.2RC10T4RC10T4.1SC10SC10B

FT 12mm Pistons (V2), 3x1.4 mm, tapered Machined for a precision fit and finish. Edges have large radiuses for the smoothest shock action. Also available are blanks for customizing your own.  12mm dia, qty 2 holes, 1.6mm each. These...

FT 12mm Pistons (V2), Blank, flat Machined for a precision fit and finish. Edges have large radiuses for the smoothest shock action. Also available are blanks for customizing your own.  12mm dia, qty 2 holes, 1.6mm each. These screw-mounted...

FT 12mm Pistons (V2), Blank, tapered Machined for a precision fit and finish. Edges have large radiuses for the smoothest shock action. Also available are blanks for customizing your own.  12mm dia, qty 2 holes, 1.6mm each. These screw-mounted...

This part fits the following vehicles: B44 B44.3 GT2 ProRally RC10 RC10 Classic RC10 World's Car RC10B2 RC10B3 RC10B4 RC10B4.1 RC10B4.2 RC10B44.1 RC10B44.2 RC10B5 RC10B5M ...

Factory Team 12 mm Pistons, 2x1.5 mm, Tapered New Factory Team machined pistons for the 12mm big bore shocks take performance to the next level. Precision CNC machined pistons allow for the best fitment and concentricity with the shock body to improve...

Factory Team 12mm Pistons, 4x1.3 mm, Tapered New Factory Team machined pistons for the 12mm big bore shocks take performance to the next level. Precision CNC machined pistons allow for the best fitment and concentricity with the shock body to improve...

Factory Team 12 mm Pistons, 2x1.6 mm  This part fits the following vehicles: RC10B4.2 RC10B44.2 RC10T4.2 RC10T4.3 SC10 SC10.2 SC10.3 JRT SC10.3 Lucas Oil SC10B SC10GT

Factory Team 12 mm Pistons, 3x1.4 mm This part fits the following vehicles: RC10B4.2 RC10B44.2 RC10T4.2 RC10T4.3 SC10 SC10.2 SC10.3 JRT SC10.3 Lucas Oil SC10B SC10GT

Factory Team 12mm Pistons, 2 x 1.5mm This part fits the following vehicles: RC10B4.2 RC10B44.2 RC10T4.2 RC10T4.3 SC10 SC10.2 SC10.3 JRT SC10.3 Lucas Oil SC10B SC10GT

FT Aluminum Hub Tower B, graphite The new graphite B hub towers are a great replacement for the standard molded towers and provide additional clearance for Factory Team 12mm Big Bore shocks by moving the turnbuckle away from the shocks. Also,...

MyLaps Transponder Holder This is a replacement plastic mount that fits MyLaps #MLP10R120 RC4 and #MLP10R078 Hybrid transponders.   This part fits the following vehicles: APEX Lexus RC F APEX Mini Touring APEX...

FT Carbon Rear Shock Tower This part fits the following vehicles: RC10T4 RC10T4.1 RC10T4.2 RC10T4.3 SC10.2 SC10.3 JRT SC10.3 Lucas Oil

Factory Team Tire Adhesive, medium viscosity Factory Team Tire Adhesive, medium viscosity  The ultimate tire adhesive. Factory Team-CA is a premium blend formula CA that is specifically formulated for mounting tires to wheels. Featuring a...

Ballstud Washers, 5.5x1.0 mm, blue aluminum These small outside diameter shims common for on-road are now available separately. Great for all 1:10 scale vehicles.   This part fits the following vehicles: APEX Lexus RC F APEX Scion...

FT Aluminum Pinion Gear, 31T 48P, 1/8 shaft Replace your standard pinion gears with these lightweight, hard-anodized versions for slight weight savings, quicker identification, and longer life. Features Factory Team hopup 7075-T6...

Servo Washers, aluminum, black Gain more secure servo mounting with these aluminum servo washers. They preserve the structural integrity of the servo ears. Features Machined from aluminum and anodized black Keys into servo ears for secure...