Misc. Hardware

These 36" antenna housings work great for airplanes, cars, boats, and helicop- ters.

Replace broke or lost antenna tubes with the Dubro Antenna Tubes. This item can be used anywhere an antenna tube is needed to support a receiver antenna wire. FEATURES Plastic...

This is the replacement elements for the Dubro motor mounts #684, 686, and 688.

This is a Dead Center Hole Locator for Locating Engine Mounting Holes. Great Planes Dead Center Hole Locater is a tool that should be in every modeler's toolbox. The tool is extremely easy to use. Simply press its self- centering alignment cone...

Custom make your own muffler extension. Will fit most engines .29 to .80 and most mufflers. This stock can be cut, drilled, tapped, and welded. Comes 1 per package. Dimensions: OUTSIDE INSIDE Width: 1.75" ...

This is an assortment of six Antenna Tubes with Caps by Dubro. FEATURES Plastic construction, assorted colors INCLUDES Six...

This is a standard replacement Antenna Tube Assortment with Caps from Dubro. This item can be used anywhere an antenna tube is needed to support a receiver antenna wire. FEATURES ...

This is an Assortment of Heat Shrink Tubing from Dubro. FEATURES Designed to shrink up to 1/2 of its original size Ideal for insulating electrical splices, covering electrical...

There's no need to use a hammer, with Dubro's easy on/easy off spinners. Just press-fit the nylon lock nuts to the backplate, align the nose cone core to the backplate with the four included pins, and secure the nosecone with the included socket head...

There's no need to use a hammer, with Dubro's easy on/easy off spinners. Just press-fit the nylon lock nuts to the backplate, align the nose cone core to the backplate with the four included pins, and secure the nosecone with the included socket head...

There's no need to use a hammer, with Dubro's easy on/easy off spinners. Just press-fit the nylon lock nuts to the backplate, align the nose cone core to the backplate with the four included pins, and secure the nosecone with the included socket head...

There's no need to use a hammer, with Dubro's easy on/easy off spinners. Just press-fit the nylon lock nuts to the backplate, align the nose cone core to the backplate with the four included pins, and secure the nosecone with the included socket head...