Glue

A new range of high strength, rapid setting, epoxy glues formulated to set hard, clear and sandable, and tolerate mixing ratio errors. Packed in attractive boxes, each bottle has a new ‘witches hat’ free flowing nozzle with matching over-cap to match the...

 4oz Bottle of Zap-A-Gap CA+ Glue from Pacer.     Not safe for foam. For foam applications use epoxy or foam-safe CA.FEATURES: Superior gap filling formula.          Medium viscosity...

Z-Poxy Finishing Resin from Pacer.FEATURES: Pacer's Finishing Resin system is specially formulated to bond            fiberglass to wood and foam...

Special modelling PVA glue that contains no fillers.Has unique solvent chemistry for faster drying and is superior to many D.I.Y PVA glues.Woodworking adhesive. Fast drying. Water clean up.

Key Features Thick viscosity Excellent handling time Adhesive Type: CA Application Type: Bottle Bottle Size: ...

Pacer's 30 Minute Z-Poxy is Resistant to Shock and Solvents, is Non-Brittle,         Easy to Sand and has Excellent Gap Filling Characteristics.FEATURES: Cures Completely...

2oz Bottle of Zap-A-Gap CA+ Glue from Pacer. Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES: Superior gap filling formula. Medium viscosity. Allows approximately 7-10 seconds for part positioning. Average of 20 seconds...

Pacer's 5 Minute Z-Poxy is Resistant to Shock and Solvents, is Non-Brittle,         Easy to Sand and has Excellent Gap Filling Characteristics.FEATURES: Cures Completely...

FEATURES: Very high viscosity formula.          Super thick and super strong.          Allows approximately 30-40 seconds for part positioning...

ZAP CA Glues are clog-resistant with and have an extra, long tip to                         reach into tight spots...

This is a 0.7oz (20g) bottle of Pro-Line Pro-Bond Tire Glue. FEATURES: 3200 PSI holding strength Dries crystal clear with no yellowing or whitening Soft and squeezable round bottle INCLUDES: 0.7oz (20g) bottle of Pro-Line Pro-Bond Tire Glue Two Pro-Bond...

This special Glue for tyres and wheels have the following technical features:- Special formulation studied exclusively for gluing plastic and rubber- Special formulation studied non-flammable and not harmful to the ozone layer- Bottle of 20 gr. for a...

FEATURES: Cures completely clear          Easy to sand and has excellent gap filling characteristics          Z-Poxy is specially formulated to bond to fiberglass,...

150mlHeat sensitive adhesive for increasing the adhesion of plastic covering films (even aluminium foil) and trim to balsa and ply surfaces.Ideal for hard working areas, eg. engine bays.

50mlFor making crystal clear windows and bonding canopies and most plasticsBonds wood, plastic, metal, painted surfaces. For glazing windows up to 6mm. Use with micro-tips.

30mlLiquid Plastic cement. Non-toxic, non-flammable, low odour and fine non-clog tip.Can also be applied with brush, or Micro Tips and Tube (AC9).Bonds in 8-10 secs and builds strength.Bonds: styrene, polyester, butyrate, plastic card. Invisible glue...

Tire gluing security is now only one step away with the release of the JConcepts Advanced Formulated Tire Glue.  Available in a thin viscosity, the advanced formulated glue has proven to be a winner on and off the track with its incredible...

50mlThe thin, non-fuming cyano alternative.Low odour, water clean up.Penetrates much further than other glues.Provides better joints on balsa, ply, GRP, plastic hinges, foam and carbon fibre.Some of the many uses:Pin & glue balsa & hardwood.Bonds...

50mlClear drying paste for bonding tissue paper used on traditional model airplanes.The formulation allows delicate tissue paper to be placed onto airframes and smoothed without tearing.

80mlMulti-purpose gap-filling canopy glue. Thick & tacky, dries clear, remains flexible. Bonds combinations of wood, plastic, fabric, foil, painted surfaces. Ideal for:Aeroplane canopiesModel boat plastic windowsSealing gaps & small...

FEATURES: An odorless CA that really works!          Great on styrofoam and foam, without a primer.          Medium thick, slow cure...

FEATURES: Formulated to bond fiberglass to wood and foam          Odorless and non-brittle          Sand easily to a smooth...

112g bottleFamous “yellow” wood glue used in aeromodelling and professional applications where hard woods are used; dries crisper than PVA giving better sanding specially with balsawood.Will not pull joints as it sets, resulting in better dimensional...

.

Pacer's 5 Minute Z-Poxy is resistant to shock and solvents, is non-brittle,        easy to sand and has excellent gap filling characteristics.FEATURES: Cures completely...

Precision, Fine glue lines,Instant fit- Anti clog- No mess.one piece glue tips for the accurate application of Deluxe Materials glues : Roket cyano, Roket Card, Super’Phatic! glue. Tips can be shortened or stretched for finer application.

Special modelling PVA glue that contains no fillers.Has unique solvent chemistry for faster drying and is superior to many D.I.Y PVA glues.Woodworking adhesive. Fast drying. Water clean up.

Roket cyano rangeHighest quality cyanoacrylate adhesives.Roket Max: Thick, maximum gap-filling adhesive; sets 10-20 sec.Designed for use with precise Micro Tip anti-clog applicator (AC9).

Roket cyano rangeHighest quality cyanoacrylate adhesives.Roket Rapid: Medium viscosity, fast setting adhesive; sets 5-10 sec.Designed for use with precise Micro Tip anti-clog applicator (AC9).

FEATURES: Jelly-like concentrated CA glue.          Super thick formula.          Will not run or flow.          Can be...

1oz Bottle of Zap CA Glue from Pacer.      Not safe for foam. For foam applications use epoxy or foam-safe CA.FEATURES: Super thin water-like consistency.          Superior penetrating...

1oz Bottle of Zap-A-Gap CA+ Glue from Pacer.      Not safe for foam. For foam applications use epoxy or foam-safe CA.FEATURES: Superior gap filling formula.          Medium viscosity...

50mlConverts Aerokote Gloss to satin or matt finish.A simple matting agent that blends readily with Aerokote gloss to give it a satin or matt finish. Just measure & add “Make it Matt” to Aerokote Gloss in the quantities as tabulated below and then...

Key Features Thick viscosity Fast bonding Overview Recommended Uses Balsa aircraft construction Plastic model building Gap filling properties Includes 2 oz (57.6g) Bottle of Professional Grade CA One...

FEATURES: Very high viscosity formula.          Super thick and super strong.          Allows approximately 30-40 seconds for part positioning...

FEATURES: Will not craze most plastics Forces the immediate cure of all CyanoAcrylates Expands gap filling ability Permits structural fillet forming Solves most tough-to-bond combinations of materials Safe for use with plastics INCLUDES: One bottle of...

10ml Bottle of Factory Team Locking Adhesive from Team Associated.FEATURES: Used to keep screws/bolts from loosening due to vibration, etc.          Apply to thread surface and assemble parts; handling...

Key Features Specially formulated to adhere rubber tires to wheels .7 oz bottle (20cc) Adhesive Type: CA Application Type: Bottle ...

FEATURES: A specialty CA adhesive developed for use on today's newer plastic.          Ideal for Lexan...one of the more difficult plastics to bond.         ...

FEATURES: Safe on most foam products Compatible with most other Foam Safe CAs Works on Balsa, Spruce, Plywood, Plastic and Metals, etc Forces most CAs to cure in 10 seconds or less Increases Gap filling and fillet forming compability None-fuming...