Fury BLX

This is the 2014 Style Clear Body for the Arrma Fury Short Course Truck.FEATURESFits all versions of the Arrma FuryMolded from clear polycarbonate plasticPrecut vinyl decal sheet for easy installationINCLUDES2014 style Clear Body for the Arrma FuryDecal...

OVERVIEW:This high-quality short course bodyshell is perfect for creating a custom painted look for your ARRMA vehicle.FEATURES:Super-tough polycarbonate for increased impact resistance and long-lasting durability - FURY vinyl decal sheet included for...

These are the optional Heavy Duty Hinge Pinsfor the Raider, Fury, and Vorteks BLX Brushless RTR Vehicles.FEATURESSteel constructionINCLUDESEight Hinge Pins with six Locknuts, six Screws and four Threaded

This is the 2013 Spec Diff Gear Maintenance Setfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESSteel constructionReplaces worn gears and leaking O-ringsINCLUDESTwo Small and two Large Differential GearsTwo Small PinsOne Large PinFour...

These are the 2013 Spec Rear Stub Axlesfor the Raider, Fury, and Vorteks BLX Brushless RTR Vehicles.FEATURESHardened steel constructionINCLUDESTwo Rear Stub Axles

This is the optional Arrma 2014 Spec Aluminum Lower Plate.FEATURESFits the brushed and brushless versions of the Fury, Granite,Raider and VorteksReplaces stock composite lower chassis plateHigh-quality aluminium for increased chassis strengthINCLUDESOne...

These are the 2013 Spec Gear Diff Outdrivesfor the Raider, Fury, and Vorteks BLX Brushless RTR Vehicles.FEATURESHardened steel constructionINCLUDESTwo Gear Diff Outdrives

This is a pair of two Arrma 3x55mm Shock Shafts.FEATURESFits the shocks used in the Arrma Fury, Fury Mega, Fury BLX, FuryBLS, Vorteks, Vorteks Mega, Vorteks BLS, Granite, Granite BLX,Mojave, Mojave BLX, Raider XL BLX and Raider XL MegaLow-friction coated...

This is the 2013 Spec Slipper Hub/Spring Setfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESMetal constructionINCLUDESSteel SpringTwo Aluminum Slipper HubsOne Aluminum Spacer

This is the 12mm Wheel Hex Set from Arrma.FEATURESFits all Arrma vehiclesMolded nylon construction with drive pin shlotINCLUDESTwo 3.4 x 12mm Front Wheel HexesTwo 5 x 12mm Rear Wheel HexesTwo 4 x 12mm Front Wheel HexesTwo 4 x 12mm Rear Wheel Hexes

These are the stock Arrma 2014 Spec Composite Upper and Lower Chassis Plates.FEATURESFits the brushed and brushless versions of the Fury, Granite,Raider and VorteksComposite plastic construction, grey in colorSpecially designed battery door closure pin...

This is a pair of two Arrma 3x45mm Shock Shafts.FEATURESFits the shocks used in the Arrma Fury Mega, Fury BLX, Granite,Granite Mega, Granite BLX, Raider XL Mega, Raider XL BLX, VorteksMega, Vorteks BLS, Vorteks BLX, Fury Mega, Fury BLX, Fury BLS,Mojave...

These are the 2013 Spec Rod End Setfor the Raider, Fury, and Vorteks BLX Brushless RTR Vehicles.FEATURESPlastic constructionINCLUDESAll Rods Ends, Shock Spacers, and Ball Ends,

This is the 2013 Spec Motor Guardfor the Raider, Fury, and Vorteks BLX Brushless RTR Vehicles.FEATURESPlastic construction, black in colorINCLUDESTwo-piece part with base and motor guard

These are the Arrma Foam Battery Spacers.FEATURESFoam construction, black in colorFits all Arrma 1/10 scale vehiclesHelps with positioning and cushioning different size battery packsINCLUDESTwo Slim Foam Strips to reduce rattlingTwo Battery Spacer Foams...

This is the 2013 Spec Front Suspension Mount Setfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESPlastic construction, black in colorINCLUDES2013 Spec Front Suspension Mount Set

These are the optional 5x3x5mm Pivot Ballsfor the Raider, Fury, and Vorteks BLX Brushless RTR Vehicles.FEATURESHardened steel constructionINCLUDESFour 5x3x5mm Pivot BallsSPECIFICATIONSLength: 0.196" (5mm)Width: 0.196" (5mm) at ball areaInner...

These are the optional 5x3x5mm Delrin Pivot Ballsfor the Raider, Fury, and Vorteks BLX Brushless RTR Vehicles.FEATURESDelrin thermoplastic constructionINCLUDESFour 5x3x5mm Pivot BallsSPECIFICATIONSLength: 0.196" (5mm)Width: 0.196" (5mm) at ball...

This is the Shock Piston and Shaft Guide Set from Arrma.FEATURESFits all Arrma vehicle shocksTwo-hole shock pistons for optimum shock oil performance on a widerange of surfacesShock guides ensure smooth and easy shock shaft operation in...

These are the optional 6x3x6mm Pivot Ballsfor the Raider, Fury, and Vorteks BLX Brushless RTR Vehicles.FEATURESHardened steel constructionINCLUDESFour 6x3x6mm Pivot BallsSPECIFICATIONSLength: 0.24" (6mm)Width: 0.24" (6mm) at ball areaInner...

This is a package of four 6x3x9mm Pivot Balls from Arrma.FEATURESSteel construction, black in colorINCLUDESFour 6x3x9mm Pivot BallsSPECIFICATIONSLength: 0.35" (9mm)Ball Diameter: 0.24" (6mm)Post Section Diameter: 0.12" (3mm)

This is a pair of 3x50mm Hinge Pinsfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESSteel constructionINCLUDESTwo Hinge PinsTwo 3x5mm Screws

These are the optional 7x4x2.5mm Ball Bearingsfor the Raider, Fury, and Vorteks BLX Brushless RTR Vehicles.FEATURESHardened steel constructionSealed to prolong life and keep out dirtINCLUDESTwo 7x4x2.5mm Ball BearingsSPECIFICATIONSInner...

This is a Diff Case Gasket from Arrma.FEATURESFits all Arrma vehiclesConstructed of composite materialINCLUDESDiff Case Gasket

This is the optional 57 Tooth 32 Pitch Spur Gearfor the Fury, and Vorteks BLX Brushless Vehicles.FEATURESPlastic construction0.8 ModINCLUDES57 Tooth 0.8 Mod/32 Pitch Spur Gear

This is the Arrma 15T 0.8 MOD Pinion Gear.FEATURESStandard pinion gear for the Arrma Brushless Fury, Brushless Mojaveand the Brushless Vorteks, optional for all other Arrma vehiclesHardened steel constructionINCLUDES15T 0.8 MOD Pinion Gear with Set Screw

This is the 15 Tooth 0.8Mod Pinion Gear for the Arrma BLX 4x4 Vehicles.**Does not fit the Mega versions.**FEATURESSteel constructionNumber of teeth stamped on back of gear for easy identificationINCLUDES15 Tooth 0.8Mod Pinion Gear with Set...

This is the 13 Tooth 0.8Mod Pinion Gear for the Arrma BLX 4x4 Vehicles.**Does not fit the Mega versions.**FEATURESSteel constructionNumber of teeth stamped on back of gear for easy identificationINCLUDES13 Tooth 0.8Mod Pinion Gear with Set...

This is a package of two 2014 spec Slipper Pads from Arrma.FEATURESFits all Arrma vehiclesConstructed of hard-wearing composite friction materialLow friction slipper pad surface for consistent slipper clutchoperationINCLUDESTwo 2014 spec Slipper Pads

This is the 18 Tooth 0.8Mod Pinion Gear for the Arrma BLX 4x4 Vehicles.**Does not fit the Mega versions.**FEATURESSteel constructionNumber of teeth stamped on back of gear for easy identificationINCLUDES18 Tooth 0.8Mod Pinion Gear with Set...

This is a pair of 12mm Wheel Hexesfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESCast alloy constructionINCLUDESTwo 12mm Wheel Hexes

This is a pair of 3x35.5mm Hinge Pinsfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESSteel constructionINCLUDESTwo Hinge PinsTwo Locknuts

This is a pair of 3x38mm Hinge Pinsfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESSteel constructionINCLUDESTwo Hinge PinsTwo ScrewsSPECIFICATIONSLength: 1.5" (38mm)Diameter: 0.12" (3mm)

This is a package of ten Arrma 3x8mm Cap Head Screws.FEATURESSteel construction, black in colorUsed in the assembly of Arrma vehicles, may also be used in anyapplication a screw this size is requiredINCLUDESTen 3x8mm Cap Head ScrewsREQUIREMENTS2.5mm hex...

This is a package of four 5x1mm O-Rings from Arrma.FEATURESSilicone rubber constructionUsed in all Arrma vehiclesINCLUDESFour 5x1mm O-RingsSPECIFICATIONSInner Diameter: 5mm (0.197")Thickness: 1mm (0.039")

These are the 5x7x7mm Crush Tubesfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESSteel constructionINCLUDESTwo 5x7x7mm Crush TubesSPECIFICATIONSInner Diameter: 0.197" (5mm)Outer Diameter: 0.275" (7mm)Length: 0.275" (7mm)

This is a pair of Front Bearing Spacersfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESSteel constructionINCLUDESTwo Front Bearing Spacers

This is a pair of Front Bearing Spacersfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESSteel constructionINCLUDESTwo Front Bearing Spacers

These Foam Body Washers provide cushioning between the body mount platform and the body shell of your vehicle. They have been designed to securely fit to the body mount of your ARRMA vehicle so that they do not fall-off when the body shell is removed...

This is a package of four P-5 O-Rings from Arrma.FEATURESSilicone rubber constructionUsed in all Arrma vehiclesINCLUDESFour P-5 O-RingsSPECIFICATIONSInner Diameter: 5mm (0.197")