Misc.

This is the optional Twin Steering Servo Conversion Kit for the Losi 1/5 Desert Buggy XL. FEATURES: -Adds another servo for extra steering performance -CNC machined from 6061-T6 aluminum and carbon fiber for light weight, maximum strength,...

This is the SR-10 Dual Servo Reverser from Futaba.This is used to "Y" two servos, on one channel on your receiver.The Dual Servo Reverser will enable both servos to move as they should, byswitching the movement of one of the servos. FEATURES: Perfect for...

REEFS Servo Shield Dark Gray NOTE: Holes for screws made so screw is flush, not sunk in. Made from a one piece block of aircraft grade aluminum. CNC Precision in the USA. Fits most servos, I've tested on these: REEFS 422HD, Triple4, Triple5,...

REEFS Servo Shield RAW  NOTE: Holes for screws made so screw is flush, not sunk in. Made from a one piece block of aircraft grade aluminum. CNC Precision in the USA. Fits most servos, I've tested on these: REEFS 422HD, Triple4, Triple5,...

NOTE: Holes for screws made so screw is flush, not sunk in.Made from a one piece block of aircraft grade aluminum.  Fits most servos, I've tested on these:REEFS 422HD, Triple4, Triple5, Savox1230, HiTec 7950TH

Made from a one piece block of aircraft grade aluminum. CNC Precision in the USA. Fits most servos.Recommended servos: REEFS 422HD, Triple4, Triple5, Savox1230, HiTec 7950TH

DESCRIPTIONThis newly-designed aluminum shift servo mount has a stronger connection to the servo compared to the stock plastic part, allowing all of the servo's power to be transmitted to smoother gear changes. It also facilitates adjustment of the servo...

.

Heavy duty 2 piece servo mount / steering set brace that makes working on the DEX410 (ver1 through ver5) much easier!With this design you will be able to remove either the servo OR the steering cranks from the chassis independently of each other.Makes...

Hot Racing aluminum fixed steering link and locked servo arm for the 1/8 Arrma Kraton, Outcast, Senton, Talion, or Typhon FEATURES: - double lock clamp gives precise fit to lock on to the servo spline - 6061 aluminum links, red anodized -...

IFW459B Servo Saver Assy (Hard Spring Type/MP10)Reinforced servo saver for MP9/10. Increased hardness and steering response.

Description: Servo saver to protect your servos! Comes with an aluminum plate to minimise the slop associated with servo savers to a minimum! Three rows of holes means they can be used in a large variety of cars. *Photos for reference only...

Setting the trim on any R/C car is crucial but perhaps even more critical is for the trim to remain consistent throughout a race. JConcepts introduces the servo mount bracket for the B6 | B6D vehicles. Constructed of billet aluminum and...

Setting the trim on any R/C car is crucial but perhaps even more critical is for the trim to remain consistent throughout a race. JConcepts introduces the servo mount bracket for the B6 | B6D vehicles. Constructed of billet aluminum and...

Description: Aluminum servo and Gyro mount, being made of aluminum allows for it to double as a heatsink for your highspeed servos which may become hot. *Photos for reference only. Feature: For: Yokomo YD-2 Material: Aluminum ...

VZW437-0 Aluminum Servo Saver (+0/R4Evo.) Aluminum servo saver for R4 series. 

VZW437-2 Aluminum Servo Saver (+2/R4Evo.) Aluminum servo saver for R4 series. +2mm length.

.

Key FeaturesAccurate attachment to the spline ensures no slop surface movementSpline-Loc™ ensures a no-worry connection to the servoRecessed screws lock in place two ways at the spline and with the servo attachment screwBlack powder-coated finish...

.

.

This is the Team Integy Universal Type Servo Saver for Servos Having 23T, 24T and 25T Output Splines.     FEATURES Alloy construction, black in color Fits Futaba, Hitec and other servos...

.

MIP MXT-1 Servo Tape, (1 in x 6 in) #5140 (3) MIP revolutionizes servo tape in the RC industry. MIP MXT TAPE BONDS LIKE GLUE. When you are ready to remove it, MIP MXT TAPE PEELS OFF IN ONE PIECE WITH ONE PULL, and leaves no residue behind. MIP™...

Metal Servo GreaseHigh-Power Servo Gear Grease for METAL Servo Gears (EBS3409)APPLICATION:This product is the gear grease for Futaba’s high-power (high-torque) servos with METAL GEARS. This gear grease is specially blended to maximize servo performance...

DESCRIPTION4-Port S.Bus Terminal Box- TB 22 PPFor S.Bus Servos (FSH-72)

This is an optional Losi Aluminum Servo Arm, and is intended for use with a Hitec Servo or any servo using the same spine count.

This is the optional aluminum replacement single arm servo horn from Losi. This is the servo horn that is used for the steering bell crank. This servo horn will work on Airtronics and KO Propo servos.

The micro failsafe is designed to return the throttle servo to a preset position in the event that radio signal is lost or the receiver battery voltage drops below a factory preset voltage (4.2V). It is recommended that half brakes be programmed as the...

FEATURES: Silicone insulation          Red coveringINCLUDES: One 3 foot piece of red silicone insulated power wireSPECS:    Length: 3' (36") (914...

Mega Roll Double Sided Clear Tape Ideal for all your electronic placement needs, servos, receivers, speed controllers, gyros, transponders and even strong enough to hold your battery pack in your 1/10 buggy or touring car.Thinner than Standard...

APPLICATION:This product is the gear grease for Futaba’s servos. This gear grease is specially blended to maximize servo performance.This grease is also applicable to movable parts such as swing-arms and springs in the stick housing of the transmitter.

Protects & Secures Servo Ears- Includes eight servo washers - Machined Aluminum- Unique 3.7mm Nipple, Accomidates almost all standard servos- Anodized

Protects & Secures Servo Ears- Includes eight servo washers - Machined Aluminum- Unique 3.7mm Nipple, Accomidates almost all standard servos- Anodized

Protects & Secures Servo Ears- Includes eight servo washers - Machined Aluminum- Unique 3.7mm Nipple, Accomidates almost all standard servos- Anodized

Protects & Secures Servo Ears- Includes eight servo washers - Machined Aluminum- Unique 3.7mm Nipple, Accomidates almost all standard servos- Anodized

Protects & Secures Servo Ears- Includes eight servo washers - Machined Aluminum- Unique 3.7mm Nipple, Accomidates almost all standard servos- Anodized

.

Intended for transmitters and receivers without mixing functions, the Graupner 2ch Mixer is perfect for V-tail (or other applications where 2ch mixing is required) because it allows four different mixing ratios: 100:100, 50:100, 100:50 and 50:50. ...

Features:High quality, corrosion resistance Easy installationSpecification:Material: Aluminum alloy+steelSuitable for 1/10 RC crawler carColor: Silver+redWire Length: 2m/78.74inchWeight: 20g