Summit

This is an optional MIP CVD Spline Kit for use on the 1/10 scale Traxxas Summit. FEATURES: Steel construction Black in color INCLUDES: Four couplings Two male spline bones Two female spline bones Two drive hubs Two axles Four pins Two 4.5mm...

This is the Hot Racing Splined Star Drive CVD Axle Kit.     FEATURES Fits the Traxxas 1/10 scale E-Revo, E-Maxx, Revo 3.3, T-Maxx 3.3 and Summit Heavy duty CNC machined #45 hardened...

These are the optional Hot-Racing Steel CV Center Drive Shafts for the Traxxas E-Revo and Summit.     FEATURES Heavy duty CNC machined #45 hardened carbon steel construction Replaces...

FEATURES Constructed of hardened black oxide coated steel Six sided spline slides smoothly throughout suspension travel without stripping out like plastic driveshafts Steel springs fully surround pins to keep them in place ...

Hot Racing optional upgrade heavy duty Center Drive Cv Splined Shaft E-Revo, E-Revo 2 Summit FEATURES: - CNC machined #45 hardened carbon steel and Aluminum construction - Replaces factory plastic drive axles - Hard Black Anodized Aluminum Slider -...

Servo, sub-micro, waterproof, metal gearAccessory part for these models:1/18 LaTrax Desert Prerunner1/18 LaTrax Rally1/18 LaTrax TetonSummitTRX-4 1979 Chevrolet BlazerTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 Sport Unassembled KitTRX-4...

This is the 1/10 scale '14 Chevy Silverado Pickup Truck Body from Pro-Line. FEATURES Designed to fit the Traxxas Summit, Revo 3.3, T-Maxx 3.3 and the 1/10 scale Team Associated MGT Molded from genuine GE...

This is the Pro-Line 1/10 scale 2017 Ford F-150 Raptor Clear Monster Truck Body FEATURES Fits the Traxxas Summit, Revo 3.3, T-Maxx 3.3, and the Team Associated MGT Molded from genuine clear...

Body reamer (aluminum handle)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially...

Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Replacement part for these models: E-Maxx Brushless E-Maxx E-Revo Brushless E-Revo Rally VXL Revo Slash 4X4 Ultimate Slash 4X4 Slayer Pro 4x4 Stampede 4x4...

Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" driveAccessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot®...

Pictures are for illustration only. Listing is for Clear Body.  This is the 1/10 scale ProLine Rat Rod Clear Body for the Traxxas Revo, Summit, and E-Revo. FEATURES: Molded from genuine GE Lexan May fit other 1/10 scale monster trucks...

This is a quantity of two Hot Racing Heavy Duty Axle Carriers for the Traxxas Revo 3.3, E-Revo, E-Maxx, Summit and Slayer.     FEATURES CNC machined aluminum construction, black in...

These are the Hot-Racing Aluminum and Carbon Fiber Axle Carriers for the Traxxas Revo 3.3, E-Revo, newer E-Maxx, Summit and Slayer.     FEATURES CNC machined aluminum construction, blue in...

These are the Hot-Racing Aluminum and Carbon Fiber Axle Carriers for the Traxxas Revo 3.3, E-Revo, newer E-Maxx, Summit and Slayer.     FEATURES CNC machined aluminum construction, silver...

This is the Hot-Racing Hard Aluminum Differential Case for the Traxxas Summit.     FEATURES CNC machined 6061-T6 aluminum construction with hard anodizing   ...

**** RCScrewZ Metal Shielded Bearing Kit For Traxxas Kit (#56076) **** Metal Shielded Bearing Kit Features: High Quality Metal Shielded Bearings Includes all bearings (Standard,...

**** RCScrewZ Rubber Shielded Bearing Kit For Traxxas Kit (#56076) **** Rubber Shielded Bearing Kit Features: High Quality Rubber Shielded Bearings Includes all...

**** RCScrewZ Precision Bearing Kit For Traxxas Kit (#72074) **** Metal Shielded Bearing Kit Features: High Quality Metal Shielded Bearings Includes all bearings (Standard, Flanged,...

 **** RCScrewZ Precision Bearing Kit For Traxxas Kit (#72074) **** Rubber Shielded Bearing Kit Features: High Quality Rubber Shielded Bearings Includes all bearings...

Hot Racing aluminum Front body mount for the 1/10th scale Traxxas E-Revo, E-Revo 2 Revo 3.3, Slayer Pro 4X4, and Summit.  FEATURES: - CNC Machined 6061 aluminum construction - Anodized black in color YOU WILL RECEIVE: - One (1) Front body...

Hot Racing aluminum rear body mount for the 1/10th scale Traxxas E-Revo, E Revo2 Revo 3.3, Slayer Pro 4X4, and Summit.  FEATURES: - CNC Machined 6061 aluminum construction - Anodized black in color YOU WILL RECEIVE: - One (1) rear body...

Hot Racing threaded aluminum shocks for Traxxas Revo, Revo 2 vehicles, including the SummitFEATURES:- Threaded shock bodies for easy, precision, and repeatable right height and pre-load adjustment- CNC machined 6061-T6 aluminum bodies, bleeder caps,...

Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm), 1/4" driveAccessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot® No. 1...

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model...

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model...

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model...

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model...

FEATURES: Stainless steel construction          Polished natural finish          Replaces all screws on the Traxxas Summit

This is the optional RC Screwz Stainless Steel Screw Set for the 1/10 scale Traxxas Summit. FEATURES Stainless steel construction Polished steel color Replaces screws all and nuts on the 1/10 scale...

CNC Machined Precision Alum. HD Steering Knuckles (w/larger 6x15 bearings) Silver Precision CNC Machined from high quality aluminum, our steering knuckles for the Traxxas Revo features all the details of the stock plastic pieces faithfully CNC machined,...

Precision CNC Machined from high quality aluminum, our steering knuckles for the Traxxas Revo features all the details of the stock plastic pieces faithfully CNC machined, and with improved durability with the larger 6x15mm outer bearing (included)...

Gear set, metal (for 2250, 2255 servos)Accessory part for these models:Bandit VXLBanditE-Maxx BrushlessE-MaxxE-Revo BrushlessE-Revo VXL BrushlessE-RevoFord F-150 RaptorFord Fiesta® ST RallyRustler 4X4 VXLRustler 4X4Rustler VXLRustlerSlash 4X4...

Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" driveAccessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot® No. 1...

Hot Racing aluminum servo saver steering for the 1/10 Traxxas E-Revo, E-Revo 2.0, Revo, Slayer Pro 4X4, and SummitFEATURES:- CNC machined aluminum construction, anodized blue- Includes heavy duty spring- All assembly ready to install (as in the...

Body reamer (plastic handle)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially...

.

.

.

.