CX Nano / CX Micro

• Dedicated Nendroid Plus Racing Miku 2014ver. As standard. • Frame is a dedicated design that greatly expanded the cockpit portion for figures, can also...

        What else you will need for ready to run: Motor: 540 size Servo: Standard size servo Battery: 7.2V 6-cell stick pack or LiPo 2S 7.4V battery ...

FEATURES: Black nylon construction INCLUDES: One Main Frame assembly

FEATURES: Steel construction Silver in color INCLUDES: Two 5.5mm (.22") ball bearings One 4mm (.16") ball bearing

FEATURES: Lexan construction White in color INCLUDES: One White Canopy REQUIRES: Installation on the heli SPECS: Length: 2.3" (58mm) Width: 1.2" (30mm)

FEATURES: Lexan construction Red in color INCLUDES: One Red Canopy REQUIRES: Installation on the heli SPECS: Length: 2.3" (58mm) Width: 1.2" (30mm)

FEATURES: Nylon construction Pre-installed ball bearing INCLUDES: One Swashplate

FEATURES: Metal construction INCLUDES: Four Bearings

FEATURES: Steel Construction Silver in Color INCLUDES: Two Flybar Weights REQUIRES: 1.5mm hex driver to install SPECS: Length: 9mm (.35") Diameter: 6mm (.23")

FEATURES: Metal construction INCLUDES: Outer Main Shaft REQUIRES: Installation SPECS: Length: 3.15" (80mm) Diameter: .098" (2.50mm) COMMENTS: This is for the Heli-Max Nano only

FEATURES: Nylon construction Black in color INCLUDES: Four Tail Rotor Blade Grips

FEATURES: Metal construction One attached grip INCLUDES: One Inner Rotor Shaft Assembly REQUIRES: Installation SPECS: Length: 4-3/32" (103.95mm) Diameter: 3/64" (1.18mm)

FEATURES: Nylon construction Black in color INCLUDES: One Set of Landing Skids REQUIRES: Installation on the helicopter SPECS: Length: 66mm (2.69") Width: 54mm (2.13") Height: 17mm (0.67")

FEATURES: Constructed of Nylon INCLUDES: Inner Shaft Collar w/bearing

FEATURES: Aluminum Construction Silver in Color INCLUDES: One Aluminum Outer Rotor Shaft REQUIRES: Installation SPECS: Length: 98mm (3.8") Diameter: 3mm (.11")

FEATURES: Nylon Construction Black in Color INCLUDES: Two Black Nylon Landing Skids

FEATURES: Nylon construction INCLUDES: Two Lower Rotor Blades SPECS: Length: 3-5/8" (92mm) Width: 53/64" (21.13mm)

FEATURES: Nylon construction INCLUDES: Two Upper Rotor Blades REQUIRES: Installing on rotor assembly SPECS: Length: 3-5/8" (92mm) Width: 53/64" (21.13mm)

FEATURES: Nylon construction with steel shaft for the rotor blades Black in color INCLUDES: One Lower Nylon Rotor Head Two 1.2 x 4mm screws

FEATURES: Nylon construction Black in color INCLUDES: One Black Nylon Battery Mount

FEATURES: Steel construction Black in color INCLUDES: Eight 1.2mm x 4mm Button Head Screws Two 1.5mm x 5mm Button Head Screws REQUIRES: Installation

FEATURES: Graphite construction Black in color INCLUDES: Two Black Graphite Canopy Mount Posts

FEATURES: Rods and rubber grommets INCLUDES: One Canopy Mounting Rod Two Grommets

FEATURES: Nylon construction Black in color INCLUDES: One Black Nylon Tail Rotor One Black Nylon Tail Rotor Mount Two 1mm x 4mm Round Head Screws

FEATURES: Carbon Fiber construction INCLUDES: One Tail Boom

FEATURES: Metal and Nylon Construction Black and Silver in Color INCLUDES: Two Servo Pushrods REQUIRES: Installation SPECS: Length: 30mm (1.1") Width: 1mm (.03")

FEATURES: Nylon construction Black in color INCLUDES: One collar One 1x2.5mm Phillips head screw

FEATURES: Metal connecting linkages with black plastic turnbuckle ends INCLUDES: Two servo linkages REQUIRES: Installation SPECS: Length: 1.48" (37.62) Diameter: .030" (.9mm)

FEATURES: Plastic construction Black in color INCLUDES: One Control Link

FEATURES: Aluminum Construction Blue in Color INCLUDES: One Aluminum Boom REQUIRES: Installation SPECS: Length: 144mm (5.6") Diameter: 5mm (.19")

FEATURES: Nylon construction Black in color INCLUDES: One Black Nylon Tail Boom Base

This is the replacement Tail Rotor Shaft for the Heli-Max AXE CP Micro EP Heli. **Will not work on the Heli-Max AXECPv3.** FEATURES: Plastic construction, Black in color Replaces a worn or damaged Tail Rotor Shaft INCLUDES: One Tail Rotor Shaft REQUIRES:...

FEATURES: Nylon construction Black in color INCLUDES: Two Main Blade Control Links REQUIRES: Installation SPECS: Length: 0.67" (17mm)

FEATURES: Nylon construction White in color INCLUDES: One Vertical Fin REQUIRES: Installation on tail boom SPECS: Length: 11mm (0.43") Width: 3.1mm (0.12") Height: 29.8mm (1.2")

FEATURES: Nylon construction Black in color INCLUDES: Two Main Blade Center Links REQUIRES: Installation SPECS: Length: 18mm (.70") Width: 4mm (.15")

FEATURES: Nylon construction Black in color INCLUDES: One Nylon Tail Boom Brace

FEATURES: Steel construction Silver in color INCLUDES: One Aluminum Tail Boom Support

FEATURES: Plastic and steel construction, Black in color Replaces worn or damaged canopy mounts INCLUDES: One 2x85mm Canopy Mount Rod (for the upper part of the Canopy) Two 2.5x16mm Flat Head Screws (for the lower part of the Canopy)

FEATURES: Nylon construction Black in color INCLUDES: One Nylon Black Inner Shaft Collar