DJI

OverviewWith DJI mature reliable sensor technology, iOSD MARK II can collect precise & real-time flight data and transmit to the ground end via video link in the most clear digital and graphical expression way. It not only brings security to your...

Product Description The PhantoMount X2 F550 gimbal frame and mounting plate is made of 1.5mm carbon fiber. Designed to work on many platforms this gimbal utilizes two HiTec 5245MG Digital Ball Bearing servos (sold separately) directly mounted to both...

PhantoMount X2 F550 2 Axis Gimbal (Assembled) The PhantoMount X2 F550 gimbal frame and mounting plate is made of 1.5mm carbon fiber. Designed to work on many platforms this gimbal utilizes two HiTec 5245MG Digital Ball...

PhantoMount X2 F450 2 Axis Wide Gimbal (Unassembled)   The PhantoMount X2 F450 gimbal frame and mounting plate is made of 1.5mm carbon fiber. Designed to work on many platforms this gimbal utilizes two HiTec 5245MG Digital Ball...

PhantoMount X2 Phantom 2 Axis Gimbal (Unassembled)   The PhantoMount X2 Phantom gimbal frame and mounting plate is made of 1.5mm carbon fiber. Designed to work on many platforms this gimbal utilizes two HiTec 5245MG Digital Ball...

This is the DJI Clover-Leaf Antenna. The 5.8GHz Clover-leaf antenna works in the frequency band of 5.8GHz ISM. It can be used in the 5.8GHz wireless video module AVL58 (both TX and RX), and also other transmitter and receiver working in the frequency...

.

Convert the top plate on your X2 gimbal to fit your DJI F550. These top plate kits will allow you to mount your PhantoMounts X2/X2 Wide gimbal to a variety of different air frames. All hardware for converting and mounting your gimbal and instructions are...

Product Description This Carbon Fiber battery tray will bolt right on the bottom of the DJI Phantom with no modifications and will allow you to better balance the Phantom so it is not front heavy. You can use a bigger battery. We like the Hyperion...

DJI Lightbridge Part 13 Smartphone Holder Light Bridge 

 

This is the replacement landing gear and mounting bracket for the first generation Phantom 2's that included the H3-2D Zenmuse. This is used to mount the New H3-3D Gimbal to this version Phantom 2.