Rock Rey

Compatible Products Losi Body Set, Clear: Rock Rey LOS330002 is compatible with LOS03016

Hot Racing optional upgrade heavy duty front splined star drive CVD axle kit for the Losi Rock ReyFEATURES:- CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and stub axle- CNC machined aluminum slider tube- Blue anodized...

.

FEATURESCNC machined aluminumOne piece knuckleAnodized BlackLarge 13mm bearings (included)Improved steel king pin design with M4 thread (SSD00451 included)Direct fit on front axle of Losi LMTFit stock LMT C hubs and steering linkWHAT'S INCLUDED2 * ...

FEATURESCNC machined aluminumOne piece knuckleAnodized GreyLarge 13mm bearings (included)Improved steel king pin design with M4 thread (SSD00451 included)Direct fit on front axle of Losi LMTFit stock LMT C hubs and steering linkWHAT'S INCLUDED2 * ...

.

Hot Racing's adjustable aluminum steering bellcrank and servo saver for the 1/6th scale Losi Baja Ray and Rack Ray vehiclesFEATURES:- Super-tough, fully adjustable servo saver bell crank- Replaces factory plastic for a stronger-than-standard stock...

Losi 42T Ring and 12T Pinion Gear: Baja Rey, Rock Rey LOS232019 is compatible with LOS03009T1, LOS03009T2

Hot Racing aluminum swaybar ready lower arm set for the Losi Rock ReyFEATURES:- CNC machined 6061-T6 aluminum, anodized black- With Sway Bar Bar Mount for LRR311FYOU WILL RECEIVE:- Two (2) lower front arms R & LREQUIREMENTS:- Installation-...

Key Features T-304 stainless steel will never rust or corrode Includes quality, reusable plastic pit case Hop-Ups & Optional: Hardware Material: ...

LED Roof Light Bar Set: Baja Rey/Rock Rey

FEATURESCNC MachinedHardened SteelScale designFully assembledPrecision splinesUp to 50 degrees operating angleDirect fit onto rear of Rock / Baja ReySPECIFICATIONFits 5mm diameter shaftsM4 set screwMin length (pin to pin): 116mmMax length (pin to pin):...

FEATURESCNC machined aluminumAnodized Black5 degree casterDirect fit on front axle of Losi LMTFit LMT knucklesWHAT'S INCLUDED1 pair (left + right) HD Aluminum C hubs (Black)Note:HD Aluminum knuckles are available (SSD00445)

Upgraded to 7075 alloy material, more sturdy and durable. Multiple positioning holes to adjust the tilt angle of damper. Strengthen the rear support of the car from the damper. Modern hollow design helps to reduce weight with strong metallic appearance...

Upgraded to 7075 alloy material, more sturdy and durable. Multiple positioning holes to adjust the tilt angle of damper. Strengthen the rear support of the car from the damper. Modern hollow design helps to reduce weight with strong metallic appearance...

Upgraded to 7075 alloy material, more sturdy and durable. Multiple positioning holes to adjust the tilt angle of damper. Strengthen the rear support of the car from the damper. Modern hollow design helps to reduce weight with strong metallic appearance...

Upgraded to 7075 alloy material, more sturdy and durable. Multiple positioning holes to adjust the tilt angle of damper. Strengthen the rear support of the car from the damper. Modern hollow design helps to reduce weight with strong metallic appearance...

Upgraded to 7075 alloy material, more sturdy and durable. Multiple positioning holes to adjust the tilt angle of damper. Strengthen the rear support of the car from the damper. Modern hollow design helps to reduce weight with strong metallic appearance...

Hot Racing optional hop-up rear suspension lower links (ladder bar) for the Losi Baja Rey, Hammer Rey Rock Rey and Baja Rey 2.FEATURES:- CNC machined 3mm thick carbon fiber- CNC machined 6061 aluminum link ends, and countersunk washers- Aluminum...

FEATURESCNC machined aluminum third memberAnodized GreyBig bearings (13mm)Direct fit onto Rock / Baja Rey rear axle WHAT'S INCLUDED1 X  Aluminum third member (grey)2 X 13mm bearings

Losi Wheels 2.2" (4) Rock Rey LOS43014 is compatible with LOS03009T1, LOS03009T2

The differential housing is made of medium carbon steel to improve strength and wear resistance. The middle section is made of lightweight aluminum 7075 material. Rubber sealing ring is used to achieve better sealing effect.Easy to assemble and fit the...

The differential housing is made of medium carbon steel to improve strength and wear resistance. The middle section is made of lightweight aluminum 7075 material. Rubber sealing ring is used to achieve better sealing effect.Easy to assemble and fit the...

The differential housing is made of medium carbon steel to improve strength and wear resistance. The middle section is made of lightweight aluminum 7075 material. Rubber sealing ring is used to achieve better sealing effect.Easy to assemble and fit the...

The differential housing is made of medium carbon steel to improve strength and wear resistance. The middle section is made of lightweight aluminum 7075 material. Rubber sealing ring is used to achieve better sealing effect.Easy to assemble and fit the...

The differential housing is made of medium carbon steel to improve strength and wear resistance. The middle section is made of lightweight aluminum 7075 material. Rubber sealing ring is used to achieve better sealing effect.Easy to assemble and fit the...

The front chassis is constantly rubbing on different surfaces. All the friction will wearout the chassis itself and the gear will be exposed and eventually be damaged. This part is a great protection for the front chassis and avoid damage on the gear.Fit...

The front chassis is constantly rubbing on different surfaces. All the friction will wearout the chassis itself and the gear will be exposed and eventually be damaged. This part is a great protection for the front chassis and avoid damage on the gear.Fit...

The front chassis is constantly rubbing on different surfaces. All the friction will wearout the chassis itself and the gear will be exposed and eventually be damaged. This part is a great protection for the front chassis and avoid damage on the gear.Fit...

The front chassis is constantly rubbing on different surfaces. All the friction will wearout the chassis itself and the gear will be exposed and eventually be damaged. This part is a great protection for the front chassis and avoid damage on the gear.Fit...

The front chassis is constantly rubbing on different surfaces. All the friction will wearout the chassis itself and the gear will be exposed and eventually be damaged. This part is a great protection for the front chassis and avoid damage on the gear.Fit...

.

Made from Harden Steel #45 for high strength and great durability. Multiple thread holes available, easy to install.Widen the wheelbase to allow better stability when driving and turning.Package includes : Hex Adaper-2pcs ; Screw Pin 4x2x11.8-2pcs...

.

Losi RR Twr Sup X-Bar Mud Guards RR LOS230029 is compatible with LOS03009T1, LOS03009T2

Losi Roll Cage Side Left and Right, Gray: Rock Rey LOS230039 is compatible with LOS03016

Losi Roll Cage, Roof Front, Gray: Rock Rey LOS230040 is compatible with LOS03016

Losi Rear Tower Support, X-Bar, Mud Guards, Gray: Rock Rey LOS230041 is compatible with LOS03016

Losi Open Rear Differential Gear Set: Baja Rey, Rock Rey LOS232051 is compatible with LOS03020T1, LOS03020T2

.

Losi Rock Rey Roll Cage Sides. Package includes replacement left and right side roll cage sides.

.

Hot Racing optional aluminum front camber link mount for the Losi Rock ReyFEATURES:- CNC machined 6061-T6 aluminum, anodized black- Stronger and more rigid than stock plastic component- Retains factory suspension geometryYOU WILL RECEIVE:- One (1) camber...

Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!Feature:For : Losi 1/10 Baja...

.

Compatible Products Losi Servo Arm with Metal Inserts: Baja Rey, Rock Rey LOS231038 is compatible with LOS03008T1, LOS03008T2, LOS03009T1, LOS03016

.

The first upgrade needed for your 1/10 Rey is a clamping metal machined alloy servo horn! This is the only clamping unit that matches the dimensions of the stock servo horn so now you have perfect fit and geometry for robust steering and performance in...

Aluminum 7075 material, modern metallic design with swirl engraving on the outer ring.Compared with original 9.3mm, this part is made 10.8mm to widen the wheel track for better stability of the chassis.Package includes : Brake Disk-2pcs ; Screw Pin...

Aluminum 7075 material, modern metallic design with swirl engraving on the outer ring.Compared with original 9.3mm, this part is made 10.8mm to widen the wheel track for better stability of the chassis.Package includes : Brake Disk-2pcs ; Screw Pin...

Aluminum 7075 material, modern metallic design with swirl engraving on the outer ring.Compared with original 9.3mm, this part is made 10.8mm to widen the wheel track for better stability of the chassis.Package includes : Brake Disk-2pcs ; Screw Pin...

Aluminum 7075 material, modern metallic design with swirl engraving on the outer ring.Compared with original 9.3mm, this part is made 10.8mm to widen the wheel track for better stability of the chassis.Package includes : Brake Disk-2pcs ; Screw Pin...

Losi Rock Rey Camber & Steering Link Set. Package includes two replacement camber links and two replacement steering links.

Losi Front Outdrive Shaft: Rock Rey LOS232022 is compatible with LOS03009T1, LOS03009T2

Losi Button Head Screws M4 x 12mm (10) LOS235007 is compatible with LOS03008T1, LOS03008T2, LOS03009T1, LOS03009T2

Losi Cap Head Screws M2 x 6mm (10) LOS235001 is compatible with LOS03008T1, LOS03008T2, LOS03009T1, LOS03009T2

Losi Cap Head Screws M2.5 x 10mm (10) LOS235002 is compatible with LOS03008T1, LOS03008T2, LOS03009T1, LOS03009T2

Losi Cap Head Screws M3 x 6mm (10) LOS235003 is compatible with LOS03008T1, LOS03008T2, LOS03009T1, LOS03009T2

Losi Cap Head Screws, M3 x 30mm (10) LOS235004 is compatible with LOS03008T1, LOS03008T2, LOS03009T1, LOS03009T2

Losi Flat Head Screws M2.5 x 5mm (10) LOS235008 is compatible with LOS03008T1, LOS03008T2, LOS03009T1, LOS03009T2

Losi Flat Head Screws M2.5 x 12mm (10) LOS235010 is compatible with LOS03008T1, LOS03008T2, LOS03009T1, LOS03009T2

Losi Set Screw M4 x 4mm Cup Point(10) LOS235012 is compatible with LOS03008T1, LOS03008T2, LOS03009T1, LOS03009T2, LOS03010T1, LOS03010T2

Losi Flat Nut M3 x 0.5 x 5mm (10) LOS235013 is compatible with LOS03008T1, LOS03008T2, LOS03009T1, LOS03009T2

FEATURESCNC machined steelHeat hardenedM4 threadFit SSD LMT knuckles (SSD00445)Fit stock LMT C hubsWHAT'S INCLUDED4 x Steel king pinsNote:These do not fit stock LMT knuckles