Wires / Connectors

This is the TQ Wire 25' roll of 10 Gauge Wire with Yellow Insulation. FEATURES: Version 2 10 gauge wire constructed from 1,050 strands of tinned copper Ideal for high current 1/8 scale and high voltage short course power systems Very flexible and easy to...

.

Castle Wire is the highest quality wire available in the RC hobby. This is the same wire that is used on all Castle Creations ESCs and motors.High strand count silicone coated copper wire is essential with higher power electric power systems. Castle...

Castle Wire is the highest quality wire available in the RC hobby. This is the same wire that is used on all Castle Creations ESCs and motors.High strand count silicone coated copper wire is essential with higher power electric power systems. Castle...

.

.

This sensor extension wire is applicable to the situation that the sensor wirebetween the motor and ESC is not long enough after mounting the AXE powersystem combo onto the chassis. And it’s available in two versions: 150mm & 300mm.

FOR 14XX SERIES SENSORED MOTORSPACKAGE CONTAINS:• Front Endbell with Ball Bearing• Endbell Screws M3 x 5mm (Qty. 3)Instructions: Remove front endbell screws using a 2.5mm hex key.Pull damaged endbell away, keeping shaft and endbell concentric...

This micro power switch is designed to easily turn on and off the power on Axial SCX24 crawler truck. It is designed very small and is easy to be mounted on convenient place for easy operation.  Suitable for all SCX24 ESC's with plug and play...

This micro power switch is designed to easily turn on and off the power on 1/24 race and drift cars. It is designed very small and is easy to be mounted on convenient place for easy operation.  It eliminates the need to plug and unplug the battery...

This sensor extension wire is applicable to the situation that the sensor wirebetween the motor and ESC is not long enough after mounting the AXE powersystem combo onto the chassis. And it’s available in two versions: 150mm & 300mm.

Description: Control your winch from a extra channel on your receiver/transmitter! Features an axuiliary power input cable for if your winch is extra power hungry! Feature: For: Crawler Winch Material: Plastic Color:...

.

.

Double up on power!The Polarized Series Wire Harness allows you to connect two battery packs in series, combining the voltage of your batteries. For example: two 3S (11.1v) packs will have the output voltage of 6S (22.2v) when connected with this harness...

FEATURES: Ideal for speed controls, motors and batteriesINCLUDES: 36" section of 8 AWG Wire with Black InsulationSPECS:    Length: 36" (91.4cm)          Wire Gauge: 8 AWG

FEATURES: Connects two battery packs in parallel, enabling capacity (mAh) to be            doubled while the voltage stays the same          10 gauge...

.

Castle Wire is the highest quality wire available in the RC hobby. This is the same wire that is used on all Castle Creations ESCs and motors.High strand count silicone coated copper wire is essential with higher power electric power systems. Castle...

FEATURES: Ideal for speed controls, motors and batteriesINCLUDES: 36" section of 8 AWG Wire with Red InsulationSPECS:    Length: 36" (91.4cm)          Wire Gauge: 8 AWG

FEATURES: Ideal for speed controls, motors and batteriesINCLUDES: 36" section of 8 AWG Wire with White InsulationSPECS:    Length: 36" (91.4cm)          Wire Gauge: 8 AWG

.

.

Green Means GO!Polarized Castle Connectors are high quality, high current polarized connectors specifically made for the demands of electric RC. Perfect for use with batteries, ESCs, charger leads, parallel and series harnesses, high current amp/watt...

FEATURES: Ideal for speed controls, motors and batteriesINCLUDES: 36" section of 10 AWG Wire with Black InsulationSPECS:    Length: 36" (91.4cm)          Wire Gauge: 10 AWG

This is the Castle Creations X Series Sensor Harness. FEATURES Allows sensored brushless motors to be run with sensored-capable Mamba X-Series ESCs Easy to install; remove sensor dust cover from ESC,...

Features:For: Batteries, Chargers, ESC, etc.Material: One Piece Adapter is built solid! It offers NO resistance.  No more cutting wires to solder a connector.High-Quality plastic with easy-to-use gripsGold Plated Connections Color:...

FEATURES: Silicone insulation          Red coveringINCLUDES: One 3 foot piece of red silicone insulated power wireSPECS:    Length: 3' (36") (914...

This is the package of three 1' sections of 10 Gauge Wire with Red, Black, and Blue Insulation from TQ Wire. FEATURES: Version 2 10 gauge wire constructed from 1,050 strands of tinned copper Ideal for high current 1/8 scale and high voltage short course...

This is the package of three 1' sections of 10 Gauge Wire with Yellow, Orange, and Blue Insulation from TQ Wire. FEATURES: Version 2 10 gauge wire constructed from 1,050 strands of tinned copper Ideal for high current 1/8 scale and high voltage short...

This is the TQ Wire 3' section of 10 Gauge Wire with Orange Insulation. FEATURES: Version 2 10 gauge wire constructed from 1,050 strands of tinned copper Ideal for high current 1/8 scale and high voltage short course power systems Very flexible and easy...

This is the TQ Wire 3' section of 10 Gauge Wire with Blue Insulation. FEATURES: Version 2 10 gauge wire constructed from 1,050 strands of tinned copper Ideal for high current 1/8 scale and high voltage short course power systems Very flexible and easy to...

This is the TQ Wire 3' section of 10 Gauge Wire with Red Insulation. FEATURES: Version 2 10 gauge wire constructed from 1,050 strands of tinned copper Ideal for high current 1/8 scale and high voltage short course power systems Very flexible and easy to...

This is the TQ Wire 3' section of 10 Gauge Wire with Yellow Insulation. FEATURES: Version 2 10 gauge wire constructed from 1,050 strands of tinned copper Ideal for high current 1/8 scale and high voltage short course power systems Very flexible and easy...

Green Means GO!Polarized Castle Connectors are high quality, high current polarized connectors specifically made for the demands of electric RC. Perfect for use with batteries, ESCs, charger leads, parallel and series harnesses, high current amp/watt...

This is the Reedy T-Plug Charge Lead with 4mm Male Bullet Connectors. FEATURES Connects a battery with an T-plug connector to a charger with 4mm female bullet input connectors ...

.

Castle Wire is the highest quality wire available in the RC hobby. This is the same wire that is used on all Castle Creations ESCs and motors.High strand count silicone coated copper wire is essential with higher power electric power systems. Castle...

FEATURES: Gold plated          Fits wire diameter up to 4mm          Use 16 gauge to 13 gauge wires          Up to 75A...

FEATURES: Gold plated          Fits wire diameter up to 4mm          Use 13 gauge to 10 gauge wires          Up to 150A...

FEATURES: Ideal for speed controls, motors and batteries INCLUDES: 36" section of 10 AWG Wire with White Insulation SPECS: Length: 36" (91.4cm) Wire Gauge: 10 AWG

.

.

Our standard sensor wires work with any ROAR based ESC and motor. It requires the use of the Castle Sensor Harness when paired with waterproof, sensored-capable Castle ESCs. Available in 150mm, 200mm, and 250mm.Compatible ESCs:Copperhead 10Mamba Micro...

Our standard sensor wires work with any ROAR based ESC and motor. It requires the use of the Castle Sensor Harness when paired with waterproof, sensored-capable Castle ESCs. Available in 150mm, 200mm, and 250mm.Compatible ESCs:Copperhead 10Mamba Micro...

Replacement Receiver Harness for the Copperhead 10 ESC.Features:Correct factory-specified connectorsWaterproof switchFactory-specified wire gauge

Green Means GO!Polarized Castle Connectors are high quality, high current polarized connectors specifically made for the demands of electric RC. Perfect for use with batteries, ESCs, charger leads, parallel and series harnesses, high current amp/watt...

FEATURES: Ideal for speed controls, motors and batteriesINCLUDES: 60" section of 13 AWG Wire with Black InsulationSPECS:    Length: 60" (1.52m)          Wire Gauge: 13 AWG

FURITEK high quality XT30 to JST-PH conversion cable is designed to support plug and play for lipo battery and Furitek esc. This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors.Application: For Lipo...

Features:Used for Extending ESC wire to Motor Connector of RC Cars, Trucks, Drones, boats, airplanes, etc.Quality soldering ensure a solid & secure connection. Specs:Wire Gauge: 14AWGWire Length: 135MMPackage Includes:3.5mm Bullet Plug Extension...

Features:Used for Extending ESC wire to Motor Connector of RC Cars, Trucks, Drones, boats, airplanes, etc.Quality soldering ensure a solid & secure connection. Specs:Wire Gauge: 14AWGWire Length: 135MMPackage Includes:4.0mm Bullet Plug Extension...

FEATURES: Ideal for many hobby applications          Black vinyl insulationINCLUDES: 60" section of 20AWG Wire with Black InsulationSPECS:    Length: 60" (1...

FEATURES: Ideal for many hobby applications          White vinyl insulationINCLUDES: 60" section of 20AWG Wire with White InsulationSPECS:    Length: 60" (1...

FEATURES: Ideal for speed controls, motors and batteriesINCLUDES: 60" section of 13 AWG Wire with Red InsulationSPECS:    Length: 60" (1.52m)          Wire Gauge: 13 AWG

.

FEATURES: Ideal for speed controls, motors and batteriesINCLUDES: 60" section of 13 AWG Wire with White InsulationSPECS:    Length: 60" (1.52m)          Wire Gauge: 13 AWG

FEATURES: Ideal for many hobby applications          Red vinyl insulationINCLUDES: 60" section of 20AWG Wire with Red InsulationSPECS:    Length: 60" (1...

FURITEK high quality XT30 to JST-PH conversion cable is designed to support plug and play for lipo battery and Furitek esc. This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors.Application: for lipo...

Features:For: Brushless MotorsHigh quality super silicone wireProtective sheathing to protect wires from damageWorks on all sensored brushless motorsSpecs:Length: 200mm / 7.87inColor: BlackPackage Includes:Brushless Motor Sensor Wire 200mm (1) 

Features:For: Brushless MotorsHigh quality super silicone wireProtective sheathing to protect wires from damageWorks on all sensored brushless motorsSpecs:Length: 250mm / 9.84inColor: BlackPackage Includes:Brushless Motor Sensor Wire 250mm (1)

Features:For: Brushless MotorsHigh quality super silicone wireProtective sheathing to protect wires from damageWorks on all sensored brushless motorsSpecs:Length: 80mm / 3.14inColor: BlackPackage Includes:Brushless Motor Sensor Wire 80mm (1)

This is the TQ 13 Gauge Wire FEATURES: Extremely flexible, red thin wall silicone insulation INCLUDES: One coil of wire SPECS: Length: 3' (914mm) Overall diameter: 3.5mm Wire: 13 gauge, 1296 strand bare copper conductor

Specs Battery/Charger Accessories: Wire Misc Electric Accessories: Wire Wires: 13 AWG  

.

.

.

.

.

.

.

FEATURES: Ideal for many hobby applications          Red vinyl insulationINCLUDES: 60" section of 24AWG Wire with Red InsulationSPECS:    Length: 60" (1...

.

Features:For: Batteries, Chargers, ESC, etc.Material: One Piece Adapter is built solid! It offers NO resistance.  No more cutting wires to solder a connector.High-Quality plastic with easy-to-use gripsGold Plated Connections Color:...

.

.

.

.

.

.

8mm motor connector set, supporting large currents for large scale rcs!Feature:For: Large Scale RC Motor ConnectionMaterial: Gold Plated MetalColor: GoldInclude:Female Connectors (3 pcs)Male Connectors (3 pcs)

Green Means GO!Polarized Castle Connectors are high quality, high current polarized connectors specifically made for the demands of electric RC. Perfect for use with batteries, ESCs, charger leads, parallel and series harnesses, high current amp/watt...

Traxxas® connector, 4s (male) (2) - FOR ESC USE ONLYFOR ESC USE ONLY. The Traxxas 4s connector adds single 4s LiPo compatibility to the VXL-6s speed control. Requires 8527 jumper plug for unused battery lead. Factory replacement plugs for 3465 and 3496...

.

In many power system installations, such as twin engine planes, pusher prop jets and quad-copters, the motor leads are not quite long enough to reach back to the speed controller. For times like this, we offer the new Cobra Motor Lead Extension Kits...

.

Replacement ESC side wire set for Mini-Z brushless boards.

- Authenticate 4 pcs of male XT60 connector - Best for RC ESC and battery

FEATURES: Extremely flexible, will not tweak finish of 12th and 10th scale pan cars. INCLUDES: One blue cable One orange cable One yellow cable SPECS: Length (each): 12" (305mm) Wire: 16 gauge 665 strand bare copper COMMENTS: Insulated with thin wall...

This is the Double Gold Connector 4mm Male to Male By TrakPower FEATURES These connectors are gold plated. INCLUDES Two double connectors ...

- 6 pcs of male T Style Ultra Plugs - Best for RC ESC and battery

FEATURES: Extremely flexible, will not tweak Orange insulation INCLUDES: One 3-ft (914mm) roll of wire COMMENTS: 665 strand bare copper conductor with thin wall silicone insulation. For 12th and 10th scale pan cars.

FEATURES: Ideal for wiring fans, switches and micro electronics 60 strands of tinned copper with a thin silicone jacket INCLUDES: One 3' length of wire with red insulation, and one with black insulation SPECS: Length: 3' (914mm) Wire Size: 22 gauge

FEATURES: Ideal for many hobby applications Black vinyl insulation INCLUDES: 60" section of 16AWG Wire with Black Insulation SPECS: Length: 60" (1.52m) Wire Size: 16AWG

FEATURES: Ideal for many hobby applications Red vinyl insulation INCLUDES: 60" section of 16AWG Wire with Red Insulation SPECS: Length: 60" (1.52m) Wire Size: 16AWG

FEATURES: Ideal for many hobby applications          Black vinyl insulationINCLUDES: 60" section of 24AWG Wire with Black InsulationSPECS:    Length: 60" (1...

Specs Battery/Charger Accessories: Wire Misc Electric Accessories: Wire Wires: 14 AWG  

- Ultra flex black color silicone wire - 3' length - Best for RC motor, ESC, and battery

Description:Use this as an adaptor on your power lead to get an extra JST plug with battery voltage on top to your normal XT60 connection.Feature:For: For: Powering Fans or Winches, ServosMaterial: PlasticColor: Black/RedInclude:XT60 Cable w/ External...

Product Description Overview This lightweight EC2 Device Connector Set features gold plated contacts which efficiently transfer power in high-draw applications. The keyed +/- housing prevents damage from reverse polarity connection...

Product Description Overview This lightweight EC2 Battery Connector Set features gold plated contacts which efficiently transfer power in high-draw applications. The keyed +/- housing prevents damage from reverse polarity connection...