EB48

These are the optional Front and Rear Universal Driveshafts for the Tekno RC EB48, EB48.2, EB48.3, NB48, and NB48.3 Vehicles. FEATURES CNC machined steel alloy construction Black coated for wear...

EATURES: Stock rear hinge pin braces for the Tekno RC EB48 buggy, optional for the SCT410 short course truck 7075 aluminum construction, gun metal gray in color INCLUDES: Two Adjustable Rear Hinge Pin Braces

This is the Rear Shock Tower for the Tekno RC EB48.3 and NB48.3 FEATURES CNC 7075 aluminum, anodized gun-metal gray in color INCLUDES Rear Shock Tower ...

FEATURES: Constructed of 7075 CNC machined aluminum, 0.20" (5mm) thick Gun metal gray in color INCLUDES: Front Shock Tower

.

This is the V2 "A" Block Adjustable Hinge Pin Brace for the Tekno RC EB48SL, EB, NB, ET, NT and SCT Vehicles. FEATURES CNC machined 7075 aluminum construction Allows independent adjustment of kickup,...

This is the V2 "B" Block Adjustable Hinge Pin Brace for the Tekno RC EB48SL, EB, NB, ET, NT and SCT Vehicles. FEATURES CNC machined 7075 aluminum construction Allows independent adjustment of kickup,...

This is the V2 "C" Block Adjustable Hinge Pin Brace for the Tekno RC EB48SL, EB, NB, ET, NT and SCT Vehicles. FEATURES CNC machined 7075 aluminum construction Allows independent adjustment of kickup,...

This is the V2 "D" Block Adjustable Hinge Pin Brace for the Tekno RC EB48SL, EB, NB, ET, NT and SCT Vehicles. FEATURES CNC machined 7075 aluminum construction Allows independent adjustment of kickup,...

.

.

.

FEATURES: CNC machined aluminum construction, gun metal gray in color 0.176oz (5g) lighter than the stock insert INCLUDES: Motor Mount Insert for the Tekno RC ECB48 and SCT410

This is the optional Adjustable Rear Outer Hinge Pin Brace for the Tekno RC EB48, EB48.2, ET48, NB48, NT48 and SCT410 vehicles.     FEATURES CNC machined from 7075 aluminum, anodized gun...

FEATURES: Made of hardened steel INCLUDES: Two driveshafts SPECS: Length: 3-7/8" Hole diameter: 4.8mm Width between pin ends: 12.7mm Shaft diamter: 3.4mm  

This is the optional Tekno RC Center/Front Tapered Driveshaft. FEATURES Fits the Tekno RC EB48 and ET48 vehicles Ten grams less rotating mass than stock driveshaft 7075 aluminum construction, black...

FEATURES: Aluminum construction INCLUDES: Two Shock Caps

.

TKR6017T – Shock Shafts w/ TiNi Coating (for 122mm shocks, steel, 2pcs)For use on the following vehicles.NB48.3 (front)EB48.3 (front)NT48.3 (front)ET48.3 (front)SCT410.3 (rear)EB48SL (rear)NT48 (front)ET48 (front)NB48 (rear)EB48.2 (rear)SCT410 (rear)

These are the new pin design from TEKNO RC, these pins fit in the same differential case as the EB48 and SCT410. They do require the new differential gears TKR 5150 to be compatible in the EB48. These new Pins are bigger in diameter, we did this so...

This is a pair of Rear Suspension Arms for the Tekno RC EB and NB48 Buggies. FEATURES Extra tough composite plastic construction INCLUDES Left and Right...

.

.

FEATURES: Aluminum construction, gun metal gray in color INCLUDES: Two Wheel Hubs with steel Pins

These are the Rear Suspension Arms for the Tekno RC EB48.3 and NT48.3. FEATURES Molded plastic composite construction Shifts shock mounting point toward wheel for greater high-speed stability ...

This is a pair of Tekno RC 15° Trailing Spindle Carriers. FEATURES Stock spindle carriers on the Tekno RC EB48.3 and NB48.3 Also can be used as a upgrade on the EB48, EB48.2, NB48, ET48...

These are the Front Suspension Arms for the Tekno RC EB48.3 and NT48.3. FEATURES Also compatible with the original EB/NB but must be used with the new front shock tower,TKR5268 Shifts shock mounting...

.

.

FEATURES: Composite plastic construction INCLUDES: Two Front Gearbox Halves

.

FEATURES: Aluminum construction, gun metal gray in color INCLUDES: Four Wheel Nuts SPECS: Hex Size: 17mm

FEATURES: Aluminum construction Threads onto shock body to compress or loosen shock spring INCLUDES: Two Rear Shock Adjustment Nuts

FEATURES: Anodized aluminum construction, gun metal gray in color INCLUDES: Two Shock Cartridge Caps  

TKR9102A – Steering Posts (aluminum, gun metal anodized)This item is a direct replacement for TKR5102A and TKR5102.Vehicle CompatibilityTKR9102A - Steering Posts (aluminum, gun metal anodized) is included with the EB48 2.0, ET48 2.0 and NB48 2.0 kits and...

FEATURES: Plastic construction, black in color INCLUDES: Right Side Battery Tray and Mud Guard

FEATURES: Composite plastic construction INCLUDES: Left and Right Spindle Carriers

These are the optional Left and Right Trailing Spindles for the Tekno RC EB48.2, EB48.3, ET48, ET48.3, NB48, NB48.3, NT48, NT48.3. FEATURES Molded plastic construction Uses 8x16x5mm outer bearings and...

FEATURES: Hardened steel construction INCLUDES: Two Steering Link Turnbuckles

FEATURES: Constructed of composite plastic INCLUDES: Left and Right Rear Hubs  

FEATURES: Composite plastic construction INCLUDES: Left and Right Spindles

FEATURES: Hard anodized aluminum construction INCLUDES: Four Aluminum Spindle Bushings

FEATURES: Stock 17mm wheel hubs with no offset Aluminum construction, gun metal gray in color INCLUDES: Two 17mm Wheel Hubs Two Steel Pins  

.

FEATURES: Constructed of aluminum, gun metal gray in color INCLUDES: Steering Servo Brace

FEATURES: 0.16" (4mm) diameter polished hardened steel construction INCLUDES: Two Front Shock Shafts

FEATURES: Hardened steel construction Fits front and rear suspension INCLUDES: Two Inner Hinge Pins

FEATURES: Steel construction INCLUDES: Two Outer Rear Hinge Pins Four 3mm Nuts

FEATURES: Aluminum construction for light weight Anchors sway bar and shock ends in place INCLUDES: Four 6.8mm Aluminum Unflanged Pivot Balls

FEATURES: Aluminum construction for light weight Anchors outside of camber steering links in place INCLUDES: Four 6.8mm Aluminum Pivot Balls

FEATURES: Aluminum construction Replaces stock steel 6.8mm stabilizer balls INCLUDES: Four 6.8mm Stabilizer Balls

FEATURES: Constructed of aluminum, gun metal gray in color INCLUDES: Servo Saver Post

FEATURES: Plastic construction Compatible with the standard build of shocks with the bleeder hole on the side, emulsion style with a screw in the cap, and vented build with a hole in the top of the cap and side with a bladder INCLUDES: Two Shock Caps,...

FEATURES: Stock front shock springs for the Tekno RC EB48 buggy, optional for the SCT410 short course truck Steel construction, black in color Yellow firmness rating INCLUDES: Two 1.5 x 8.0T, 70mm Yellow Rate Front Shock Springs SPECS: Wire Diameter: 0...

FEATURES: Stock front shock springs for the Tekno RC EB48 buggy, optional for the SCT410 short course truck Steel construction, black in color Yellow firmness rating INCLUDES: Two 1.5 x 8.0T, 70mm Yellow Rate Front Shock Springs SPECS: Wire Diameter: 0...

TKR5263 – Split Cntr Diff Mount (composite, requires TKR5260, EB/ET/SCT/SL)This is an inexpensive way to put a split center diff mount on your EB/ET/SCT/SL vehicle.  These composite parts come standard on the SCT410.3 and EB48 SL and require the...

FEATURES: For the inside of steering blocks and rear hub carriers of the Tekno RC SCT410 INCLUDES: Four 10x15x4mm Ball Bearings SPECS: Inner Diameter: 10mm Outer Diameter: 15mm Thickness: 4mm

FEATURES: Made of black plastic and steel INCLUDES: One differential case SPECS: Diameter: 28mm (1-1/8") Length: 25mm (1") Mounting hole, center to center of diff: 11.5mm (7/16") diameter: 3.0mm (1/8") Center shaft, outer diameter: 8.0mm (5/16") inner...

These are the Rear Arm Mud Guards for the Tekno RC EB48SL Buggy, and the SCT410.3 4x4 Short Course Truck. **Not compatible with the original EB/NB/SCT410 vehicles.** FEATURES Plastic construction,...

.

FEATURES: For the outside of steering blocks and rear hub carriers of the Tekno RC SCT410 INCLUDES: Four 6x12x4mm Ball Bearings SPECS: Inner Diameter: 6mm Outer Diameter: 12mm Thickness: 4mm

FEATURES: For the outside of steering blocks of the Tekno RC EB48 and NB48 INCLUDES: Four 8x14x4mm Ball Bearings SPECS: Inner Diameter: 8mm Outer Diameter: 14mm Thickness: 4mm  

FEATURES: Fiberglass construction INCLUDES: Two Brake Discs

FEATURES: Plastic construction Steel pins INCLUDES: Two Brake Levers and two Brake Cam Stays Two 2x10mm Pins

FEATURES: Steel construction, black in color INCLUDES: Ten M3x40cm Flat Head Screws REQUIRES: 2mm hex wrench SPECS: Length: 40mm Diameter: 3mm    

.

FEATURES: Steel construction, black in color INCLUDES: Ten M4x15mm Flat Head Screws REQUIRES: 2.5mm hex wrench SPECS: Length: 15mm Diameter: 4mm  

FEATURES: Steel construction Fits front or rear suspension 2.4mm diameter INCLUDES: Front and rear Swaybar

This is the 2.0mm Front Sway Bar for the Tekno RC EB.3, NB.3, SL and SCT3. FEATURES Prebent steel construction Diameter determines resistance to chassis roll, the larger the diameter the greater...

This is the 2.1mm Front Sway Bar for the Tekno RC EB.3, NB.3, SL and SCT3. FEATURES Prebent steel construction Diameter determines resistance to chassis roll, the larger the diameter the greater...

This is the 2.7mm Front Sway Bar for the Tekno RC EB.3, NB.3, SL and SCT3. FEATURES Prebent steel construction Diameter determines resistance to chassis roll, the larger the diameter the greater...

This is the 2.9mm Front Sway Bar for the Tekno RC EB.3, NB.3, SL and SCT3. FEATURES Prebent steel construction Diameter determines resistance to chassis roll, the larger the diameter the greater...