E-Maxx

This is a Pre-Built Performance Transmission for Slash® 2WD, Electric Stampede® 2WD, Electric Rustler® and Bandit®*. The 2WD Slash® is one of the most important and successful vehicles in the History of RC...

This is a quantity of eight Hot-Racing HD Big Bore Shocks for the Traxxas T-Maxx, E Maxx, and most monster trucks using 100mm shocks.     FEATURES Big Bore cylinders constructed of CNC...

MIP X-Duty™, CVD Drive Kit, 145mm x 170mm w/ 6mm x 12mm Bearing, Traxxas T-Maxx 3.3, E-Revo, E-Maxx #18130 In an effort to consolidate multiple kits into 1 which provides less clutter in the hobby shops/ shelves at the distributor; this kit...

This is the Hot Racing Splined Star Drive CVD Axle Kit.     FEATURES Fits the Traxxas 1/10 scale E-Revo, E-Maxx, Revo 3.3, T-Maxx 3.3 and Summit Heavy duty CNC machined #45 hardened...

This version is for the;Traxxas XO-1Traxxas 1/10 E-RevoTraxxas E-Maxx Straight bolt on with your 6mm axle and you can use the same Traxxas 5189 pin lock screw. You will need to do some sanding and trimming to your chassis to accept the 1/5 Tires. 

Hot Racing dual slider CV joint axle driveshafts for the front or rear of the NEW Traxxas 1/10th scale E-Revo, E-Maxx, Revo 3.3, T-Maxx 3.3, and Summit. These shafts are compatible with vehicles that use the Traxxas 5451X axle shafts. Please confirm that...

Pictures are for illustration only. Listing is for Clear Body.    FEATURES Molded from genuine GE lexan Licensed RAM 1500 scale looks   INCLUDES ...

This is the Hot Racing Helical Spiral Differential Ring/Pinion Gear Set. FEATURES Fits the front and rear diffs of the following Traxxas vehicles; E-Maxx Revo 3.3 E-Revo Slayer Pro 4x4 T-Maxx 3.3...

This is the RB Innovations Ice Amps Blower System for Traxxas E-Revo, E-Maxx, Summit, Losi SCTE 4X4 and other similar vehicles. **Will NOT fit the Traxxas Stampede 4x4, or Slash 4x4.** FEATURES Belt...

Body reamer (aluminum handle)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially...

Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Replacement part for these models: E-Maxx Brushless E-Maxx E-Revo Brushless E-Revo Rally VXL Revo Slash 4X4 Ultimate Slash 4X4 Slayer Pro 4x4 Stampede 4x4...

Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" driveAccessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot®...

Hot Racing heavy duty aluminum axle carriers (steering knuckles) with carbon fiber steering arms for the 1/10 Traxxas E- Maxx (new), E-Revo (NOT 2.0), Revo 3.3, Slayer Pro 4X4, Summit, and T-Maxx 3.3FEATURES:- CNC machined aluminum construction, anodized...

These are the Hot-Racing Aluminum and Carbon Fiber Axle Carriers for the Traxxas Revo 3.3, E-Revo, newer E-Maxx, Summit and Slayer.     FEATURES CNC machined aluminum construction, blue in...

These are the Hot-Racing Aluminum and Carbon Fiber Axle Carriers for the Traxxas Revo 3.3, E-Revo, newer E-Maxx, Summit and Slayer.     FEATURES CNC machined aluminum construction, silver...

This is the Hot Racing Aluminum Steering Bellcrank and Servo Saver for the Traxxas T-Maxx and E-Maxx.     FEATURES CNC Aluminum replaces stock plastic components Four ball bearings for a...

Metal Shielded Bearing Kit Features: High Quality Metal Shielded Bearings Includes all bearings (Standard, Flanged, One-Way & Thrust if needed) ...

Rubber Shielded Bearing Kit Features: High Quality Rubber Shielded Bearings Includes all bearings (Standard, Flanged, One-Way & Thrust if needed) Rubber shielded bearings are the best defense from dirt and grime.....great...

RB Innovations Wheelie Bar kit for the Traxxas T-Maxx and E-Maxx. FEATURES Metal alloy construction Silver in color Rubber O-ring tires INCLUDES ...

FEATURES: Composite construction, blue in color Rugged durability and slop free movement INCLUDES: Two Upper Arms Left and Right Lower A Arm Two Axle Carriers Two 4mm Hinge Pins Four E-Clips Two Aluminum Pivot Ball Set Screws Two Delrin Pivot Ball...

FEATURES: Composite construction, black in color Rugged durability and slop free movement INCLUDES: Two Upper Arms Left and Right Lower A Arm Two Axle Carriers Two 4mm Hinge Pins Four E-Clips Two Aluminum Pivot Ball Set Screws Two Delrin Pivot Ball...

Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm), 1/4" driveAccessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot® No. 1...

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model...

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model...

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model...

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model...

This is the optional RC Screwz Stainless Steel Screw Set for the 1/10 scale #39086-4 Traxxas E-Maxx with TSM FEATURES Stainless steel construction Polished steel color Replaces screws all and nuts on...

FEATURES: Highly detailed body, trimmed Clear plastic body with a protective overspray film INCLUDES: One clear body with decals REQUIRES: Polycarbonate Paint SPECS: Length: 19-1/2" (495.3mm) Width: 6-3/4" (171.45mm) --front Width: 7" (177.8mm) --rear...

CNC Machined Precision Alum. HD Steering Knuckles (w/larger 6x15 bearings) Blue Precision CNC Machined from high quality aluminum, our steering knuckles for the Traxxas Revo features all the details of the stock plastic pieces faithfully CNC machined,...

CNC Machined Precision Alum. HD Steering Knuckles (w/larger 6x15 bearings) Silver Precision CNC Machined from high quality aluminum, our steering knuckles for the Traxxas Revo features all the details of the stock plastic pieces faithfully CNC machined,...

Gear set, metal (for 2250, 2255 servos)Accessory part for these models:Bandit VXLBanditE-Maxx BrushlessE-MaxxE-Revo BrushlessE-Revo VXL BrushlessE-RevoFord F-150 RaptorFord Fiesta® ST RallyRustler 4X4 VXLRustler 4X4Rustler VXLRustlerSlash 4X4...

Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" driveAccessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot® No. 1...

This is the optional Hot-Racing Differential Cup for the Traxxas E-Maxx and Revo.     FEATURES CNC machined 6061 aluminum construction, blue in color Replaces Traxxas's #3978 diff...

Protect the underside of your Traxxas 1/10 E-Maxx Monster Truck by installing our Stainless Steel Skid Plates. The side skid plates shown add strength and protect your molded chassis from gouges, scrapes, and dents. Made from stainless steel, the side...

Body reamer (plastic handle)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially...

**** RCScrewZ Stainless Screw Kit For Traxxas Kit (#39036/39036-1) ****    RCScrewZ Stainless Screw Kits are 100% complete. Your new kit will include everything needed to do a full conversion and more.  Stainless Steel Screw...

.

This is the the optional Hot-Racing 65T Steel Spur Gear for the Traxxas E-Maxx, E-Revo, 1/8 Funny Car, and Summit.     FEATURES CNC machined and lightened hardened steel construction, black...

This is the the optional Hot-Racing 68T 32P 0.8 Mod Steel Spur Gear for the Traxxas E-Maxx, E-Revo, 1/8 Funny Car, and Summit.     FEATURES CNC machined and lightened hardened steel...

Hot Racing optional super duty slipper system with pressure plate, slipper hub, and metallic friction pad for the 1/10 Traxxas E-Maxx, E-Revo, Rally, Revo 3.3, Slash 4X4, Slayer Pro 4X4, Stampede 4X4, Summit, and T-Maxx 3.3. FEATURES: - CNC...