Traxxas

Roll bar (assembled) (fits #9811 or 9812 series bodies)Assembled chrome roll bar for 9811-series TRX-4M™ K10 bodies

These are the Left and Right Rear Shock Towers for the Traxxas X-Maxx Monster Truck     FEATURES Two-piece molded composite plastic...

FEATURES Molded composite plastic construction   INCLUDES One each; Bumper Mount and Front...

This is the Receiver Box and Wire Cover for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic receiver box with...

FEATURES Molded composite plastic construction Fastens to each side of the chassis to help reduce damage from side impacts   ...

Replacement front upper bulkheadReplacement part for these models:X-Maxx® UltimateX-Maxx®XRT® UltimateXRT®

FEATURES Molded composite plastic construction Fastens to chassis top brace and holds battery hold downs in place   ...

Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler...

15-tooth pinion gear (48-pitch) fits 2.3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

FEATURES: Nylon construction          Black in colorINCLUDES: One Front Body Mount          One Rear Body...

FEATURES: Nylon construction          Black in colorINCLUDES: One Center Differential Kit

The Slash® 2WD clipless body conversion kit allows you to convert your 1/10 scale 2WD Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the...

The Slash® 4X4 clipless body conversion kit allows you to convert your 1/10 scale 4X4 Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the...

Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)Accessory part for these models:Ford Fiesta® ST RallyRustler 4X4 VXLRustler...

FEATURES: Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash Black colored wheel with satin chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Split Spoke...

FEATURES: Fits two wheel and four wheel drive 1/10 scale Traxxas Slash Ultra soft S1 off-road rubber treaded tires Dual profile (inner diameters of 2.2" (56mm) and 3.0" (76mm) INCLUDES: Two Mud...

FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly Screw pin REQUIRES: Installation on vehicle

Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)Replacement part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 Ultimate

Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)Replacement part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 Ultimate

This is the Front Bulkhead for the Traxxas Slash 4x4. FEATURES Composite plastic construction, black in color Fastens to front of chassis and holds...

Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5mm PTFE-coated washers (2)/ 2.5x8 CCS (4)Requires: Traxxas #3956X Spur GearAccessory part for...

Tires & wheels, assembled, glued (2.8") (RXT black & chrome wheels, Anaconda tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)Anaconda® performance...

Tires & wheels, assembled, glued (2.8") (RXT green wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)High-performance all-terrain Talon EXT...

Driveshaft, center, plastic, (black)/ screw pinReplacement part for these models:Rustler 4X4Accessory part for these models:Rustler 4X4 VXL

Driveshaft, center, 6061-T6 aluminum (red-anodized) (189mm)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Driveshaft, center, 6061-T6 aluminum (blue-anodized) (189mm)Replacement part for these models:Rustler 4X4 VXLAccessory part for these models:Rustler 4X4

Driveshaft, center, 6061-T6 aluminum (red-anodized)Accessory part for these models:Stampede 4X4 Unassembled KitStampede 4x4 VXLStampede 4x4Telluride 4x4

Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center)Replacement part for these models:Rustler 4X4Accessory part for these models:Rustler 4X4 VXL

Body, Rustler® 4X4, orange & blue/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Is it time to upgrade your Rustler®...

Body, Rustler® 4X4, red & blue/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Is it time to upgrade your Rustler® 4X4...

Skid plate, roof (body) (orange)/ 3x12 CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

FEATURES: Grey plastic construction INCLUDES: One Grey Plastic Chassis Plate REQUIRES: Installing all compoments onto chassis SPECS: Length: 10.25" (260mm) Width: 5.12" (130mm) Weight: 5.82oz (165g)

Body, Rustler 4X4, red/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)Replacement part for these models:4-Tec® Drift Ford® Mustang®

FEATURES For use with the Traxxas Link app and TQi radio system. INCLUDES Traxxas Link TQi Wireless...

FEATURES: 118+mph speed rated belted slicks with foam inserts Split spoke plastic wheels with black chrome finish Stock replacement tires and wheels INCLUDES: Two Rear Slicks with Foam Inserts and...

FEATURES: Stock replacement wheels Plastic construction with black chrome finish 17mm splined hex for greater degree of grip and less chance of slippage INCLUDES: Two Split Spoke Rear...

FEATURES: 118+mph speed rated belted slicks with foam inserts Dished design black plastic wheels INCLUDES: Two Rear Slicks with Foam Inserts and two Wheels SPECS: Outer Diameter: 4.29" (109mm) Width:...

The 50-tooth spur gear and 20-tooth pinion gear combo (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let...

Bumper, front/ bumper mount (fits 2WD Slash®) (for LED light kit installation)Replacement front bumper and mount for 5894 2WD Slash LED light kit.Replacement part for these models:SlashAccessory part...

These are the Low CG Nerf Bars in Blue for the 1/10 scale 2WD Traxxas Slash. FEATURES: Plastic construction, blue in colorFor use with the Low CG chassisFastens to sides of chassis to absorb...

FEATURES: Constructed of aluminum, silver in color INCLUDES: One Exhaust Header for the Traxxas Jato REQUIRES: Attaching to engine and rubber coupler SPECS: Distance between mounting holes: 0.87" (22...

FEATURES: Nylon Construction Black in Color INCLUDES: Two Wing Supports One Wing Mount Four 4mm x 8mm Cap Head Socket Screws Four 3mm x 12mm Cap Head Socket Screws One Instruction Sheet REQUIRES:...

TRX® 3.3 Engine IPS Shaft w/o StarterThe powerful TRX® 3.3 racing engine with IPS shaft delivers unbeatable performance on or off the track. The engine features a precision composite slide...

FEATURES: Nylon construction, black in color INCLUDES: Two long steering servo horns Two short steering servo horns Two 3x20mm turnbuckles REQUIRES: Installation on the vehicle  

FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium Unique hollow tube design using 7075-T6 aluminum anodized fire red in...

FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium Unique hollow tube design using 7075-T6 aluminum Anodized black in...

These are the (optional) Red Aluminum Pushrods for the Rocker Arms These go between the Rocker Arms and the Lower Suspension Arms **Must be used with Progressive-3 Rocker Arm Set.** FEATURES: Red...

FEATURES: Blue anodized header Cooling fins on mounting flange INCLUDES: One header Two allen mounting screws One O-ring for sealing the header SPECS: Length: 1.64" (41mm) Width: 1.69" (43mm) Height:...

Give your Traxxas boat trailer even more scale detail with this LED light kit. The light kit requires the 10348 wire harness extension when installing lights in the 10350 boat trailer.Accessory part...

.

FEATURES: Nylon 2.2" dish wheels          White in color          Response Pro 2.2" tiresINCLUDES: Two...

FEATURES: Plastic constructionINCLUDES: Two 2.2" WheelsREQUIRES: 2.2" Tires          Tire Glue SPECS:    Outer Diameter: 2.2" (55...

FEATURES: Talon tread          Gray foam insertsINCLUDES: Two Talon Tires with Foam InsertsREQUIRES: Installation on the...

FEATURES: Steel construction          Red in color          2.22 rate, blackINCLUDES: Two GTR Shock...

Portal housings, inner (front), 6061-T6 aluminum (blue-anodized) (2)/ 3x12 BCS (2)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4...

WideMaxx® Suspension KitA Tougher, Wider StanceThe Traxxas X-Maxx is a new breed of monster truck with a tough-as-nails attitude, brutal power, and unrivaled durability. The WideMaxx kit builds on...

Is it time to upgrade your X-Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. X-Maxx bodies come fully-assembled and ready...

This is a pair of GTX Shocks for the Traxxas X-Maxx FEATURES Aluminum bodies, anodized color Fully assembled, springs not included ...

FEATURES One-piece molded composite plastic construction   INCLUDES Front...

FEATURES Molded composite plastic construction   INCLUDES One each; Bumper Mount and Rear...

This is the set of Traxxas Extra Extra Long GTR Shock Springs with 0.711 Orange Compression Rate. FEATURES Steel construction,...

FEATURES: Hardened plastic construction Black in color INCLUDES: Two front differential housing halves REQUIRES: Installation around assembled differential components

Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale 4X4 Slash, Stampede®, Rustler®, Rally)Accessory part for these models:Ford Fiesta® ST RallyHoss™ 4X4...

Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale 4X4 Slash, Stampede®, Rustler®, Rally)Accessory part for these models:Ford Fiesta® ST RallyHoss™ 4X4...

Center differential, complete (fits Hoss™ 4X4 VXL)Accessory part for these models:Hoss™ 4X4 VXL

47-tooth ring and 12-tooth pinion gears for rear differentialsReplacement part for these models:Rustler® 4X4Slash 4X4

Ring gear, differential/ pinion gear, differential (12/47 ratio) (front)

FEATURES: Metal Construction, installs in gearbox behind the primary clutch assembly Black in color INCLUDES: One Metal Primary Shaft One One Way Bearing One Snap Ring One 5mm x 8mm x .5mm...

FEATURES: Nylon construction Enhances tuning ability of suspension by controlling compression and rebound rate of shocks INCLUDES: One Variable Damping Kit for GTR Shocks: #1, #2 and #3 pistons and...

This is the Traxxas 2.5R Racing Engine with IPS (Integrated Pilot Shaft) and Pull-Start.For use in all Traxxas vehicles that use the TRX 2.5 engine.This engine is a .15 engine. The 2.5 refers to a...

Our high-quality aluminum Big Bore shocks are packaged in convenient 8-packs just for Maxx Truck enthusiasts. The Big Bore shocks are hard-anodized and PTFE-coated for the smoothest operation...

.

.

This is the Glow Plug Lead Wire for the Revo EZ Starting System. This attaches to the glow plug prong to heat the plug during starting. FEATURES: Blue silicone insulated wire with pre-installed...

.

This is the Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. FEATURES: Extra long 12" wires Pre-installed...

FEATURES: All wires included in an EZ starting system INCLUDES: One complete Wire Set with connectors Two zip ties One adhesive foam pad

.

FEATURES: Replaces worn diff carriers gaskets and spacersINCLUDES: Diff Carrier and Gaskets5381 Steel Spider Gear Braces (not used with Revo) Instruction sheetREQUIRES: Disassembly of differential,...

FEATURES: Black metal 3x25mm grub screws. Silver metal 3mm locknuts with nylon inserts. INCLUDES: Eight 3x25mm Grub Screws Eight 3mm Locknuts

Body clip (mounting clip), angled, 90-degrees (black) (10)Accessory part for these models:E-Revo BrushlessE-RevoFord F-150 RaptorFord Fiesta® ST RallyFord RaptorJatoNitro SlashRally VXLRevoRustler...

FEATURES: Composite nylon construction, black in color Install one way and you can secure battery packs up to 21mm in height flip it over and install for battery packs up to 28mm in height Two sets...

LED light harness, rear (requires #2477 wheelie bar mount)Replacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed ReplicaRustler®Stampede®Accessory part for these models:Bandit®...

Steering bellcranks, drag link (orange-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)Enhance steering precision, strength, and looks with Traxxas aluminum steering...

.

Turnbuckles, aluminum (orange-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrenchTraxxas’ aluminum turnbuckles make it easy to add strength and...

Bumper, front/ 4x12 CCS (2) (fits 2WD Rustler® or Bandit®) (for LED light kit installation)Replacement front bumper for Bandit and 2WD Rustler LED light kits.Replacement part for these...

Rebuild kit, 2200Kv motor, brushless (includes plastic endbell, 5x16x5mm ball bearings (2), 5.05x7.5x.05 washer (1), 5.05x7.5x0.1 washer (1), 5.05x7.5x.19 washer (1), 6x5x15 spacer (1))Replacement...

Heat sink (fits #3351R and #3461 motors)The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on...

FEATURES: Sturdy plastic construction, metal fuel nipple pre-installed and spring loaded cap for fast fill-ups. INCLUDES: 1 assembled fuel tank. SPECIFICATIONS: Length: 2-3/8" Width: 1-7/16"...

FEATURES: Plastic construction Black in color Futaba typecConnectors INCLUDES: One On/Off Switch Harness w/Charge Cord. REQUIRES: Assembly onto Vehicle

There has never been an easier or safer way to charge your batteries than the Traxxas iD® system. Just plug a Traxxas iD-equipped battery into the EZ-Peak® Plus 4s and press Start - that’s all there...

The New EZ Peak Live Dual iD Charger The Most Advanced, Most Powerful, Charger Ever From Traxxas! The new EZ-Peak® Live Dual iD Charger takes all the advanced features of the EZ-Peak Live...

Nuts, 3mm nylon locking, black (8)Replacement part for these models:Sledge™

Nuts, 3mm nylon locking, flanged, black (8)Replacement part for these models:Sledge™

Gear set, metal (for 2085 & 2085X servos)Accessory part for these models:X-Maxx

.

Gear set, metal, high speed (for 2070, 2075 servos)Replacement part for these models:Slash 4X4 UltimateTRX-4 Ford BroncoUnlimited Desert RacerAccessory part for these models:E-Revo VXL...

Gear set (for 2070, 2075 servos)Replacement part for these models:4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLE-Revo VXL BrushlessFord F-150 RaptorFord GT®Ford Mustang GTRustler 4X4...