Traxxas

Heavy-duty upper suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the...

Replacement front and rear body cage cross bars for the Pro Scale® Sand Car.

Replacement left and right body cage halves for the Pro Scale® Sand Car.

Chassis top brace

Replacement front upper and lower steel bulkhead tie bars (2)

Replacement steering servo tray with cover

Replacement left and right front body mount latches for the Pro Scale® Sand Car. Includes 3x15 mounting screws (16).

Replacement left and right nerf bars

Replacement rear upper bulkhead

Replacement rear lower bulkhead

Replacement wire harness for LED power supply

Replacement mount for LED light kit power supply

Replacement left & right LED side pods for 10996 LED light kit. Includes mounting hardware.

Replacement curved light bar (180 mm) for 10996 high-voltage LED light kit.

Replacement upper and lower rear body mounts

Replacement body interior for the Pro Scale® Sand Car. Interior comes complete with molded accessories and mounting hardware.

Complete inner cage assembly for the Pro Scale® Sand Car. Includes assembly hardware.

Body, Funco® Pro Scale® Sand Car, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet (requires #10912 body cage & #10914 interior for complete...

Body, Funco® Pro Scale® Sand Car (clear, requires painting)/ decal sheet (requires #10912 body cage & #10914 interior for complete assembly)The clear Pro Scale Sand Car body comes fully trimmed...

25-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

24-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

23-tooth pinion gear (32 pitch) fits 3 mm motor shafts and includes set screw. (For use with steel spur gears) Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing...

Replacement steel CV driveshaft for the 9051X and 10750X extreme heavy-duty steel CV driveshaft set.

Rear upper and lower WideMaxx suspension arms widen Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material, WideMaxx suspension arms are available in...

Front upper and lower WideMaxx suspension arms widen Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material, WideMaxx suspension arms are available in...

Front upper and lower WideMaxx suspension arms widen Mini Maxx’s stance for even greater cornering stability. Molded from our toughest composite material, WideMaxx suspension arms are available in...

Replacement chassis fits 10728X front bulkhead. Not compatible with 10728 bulkhead.10722X chassis must be used with 10728X front upper and lower bulkheads. Not compatible with 10728 bulkhead.

he Pro Built® front differential comes completely assembled and ready to install in your Maxx®. Includes differential pinion gear and bearings.Accessory part for these models:Maxx® Slash®Maxx®

WideMaxx® Suspension KitA Tougher, Wider StanceThe Traxxas X-Maxx is a new breed of monster truck with a tough-as-nails attitude, brutal power, and unrivaled durability. The WideMaxx kit builds on...

Replacement gear covers for X-Maxx® and XRT®.Replacement part for these models:X-Maxx®XRT®Accessory part for these models:X-Maxx® UltimateXRT® Ultimate

Tires & wheels, assembled, glued (XRT® Race black chrome wheels, Gravix™ belted tires, dual profile (4.3" outer, 5.7" inner) foam inserts) (left & right)Belted Gravix™ low-profile 7.4″ x 4.0″...

Left and right aluminum stub axle carriers improve the appearance, ruggedness, and control of your X-Truck™. The billet 6061-T6 aluminum construction adds strength and precision where you want it...

Steering servo horn and 48 mm steering linkage with pre-assembled with pivot ballsReplacement part for these models:XRT®Accessory part for these models:XRT® Ultimate

Enhance the steering precision, strength, and looks of your XRT® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to your...

Steering blocks, left & right/ caster blocks (c-hubs), left & right/ 20x32x7mm bearings (2)/ 15x24x5mm bearings (2)These left and right steering blocks and caster blocks were redesigned and...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your X-Truck™. The hubs are carefully machined from a block of 6061-T6 aluminum to add strength and...

Green XRT® wing with 4x12 mm screws (4)Accessory part for these models:XRT® UltimateXRT® 

XRT® body support includes front mount, rear latch, roof and hood skids, and 3x12 mm screws (19). Fits 7812 body.Replacement part for these models:XRT® UltimateXRT®

Body, X-Maxx®, Green (painted, decals applied) (assembled with front & rear body mounts, rear body support, and tailgate protector)Replacement part for these models:X-Maxx®

Rod ends (4) (assembled with steel pivot balls) (replacement ends for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X)Accessory part for these models:X-Maxx

Add more color and style to your X-Truck™ with this aluminum gear cover. The cover is machined from tough 6061-T6 aluminum for maximum rigidity with a brilliant anodized finish and laser-etched logo...

Take your X-Truck™ to the next level with this aluminum differential housing. The housing is machined from tough 6061-T6 aluminum for maximum strength and protected with a brilliant anodized finish...

.

This is a pair of 8S Rated Tires and Wheels for the Traxxas X-Maxx Monster Truck.FEATURESTires glued to wheels, ready to installTires molded from rubber with aggressive all-terrain tread that is...

This is a pack of two Traxxas X-Maxx Tires, Pre-Mounted on Satin Chrome Wheels. These massive X-Maxx tires are pre-gluid to X-Maxx wheels, with included foam inserts. For use on the front or rear,...

Tires & wheels, assembled, glued (X-Maxx black chrome wheels, Maxx AT tires, foam inserts) (left & right) (2)

.

.

FEATURES Steel construction with composite plastic rod ends and pressed-in ball links   INCLUDES ...

 

This is the Center Driveshaft Assembly for the Traxxas X-Maxx Monster Truck     FEATURES Aluminum construction with natural silver...

Increase the precision and durability of your X-Truck ® with this double-shear aluminum servo horn. Machined from tough 6061-T6 aluminum, the servo horn adds colorful style with a brilliant anodized...

Enhance the steering precision, strength, and looks of your X-Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to your...

Enhance the steering precision, strength, and looks of your X-Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to your...

Add more color and style to your X-Truck™ with this set of four aluminum suspension pin retainers. The retainers are carefully machined from tough 6061-T6 aluminum and anodized in bright eye-catching...

Add more color and style to your X-Truck™ with this set of four aluminum suspension pin retainers. The retainers are carefully machined from tough 6061-T6 aluminum and anodized in bright eye-catching...

Tires & wheels, assembled, glued (3.8" black wheels, belted Sledgehammer® tires, foam inserts) (2)Belted Sledgehammer® tires deliver game-changing stability and control whether you’re slinging...

Suspension links, rear upper, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)Accessory part for these models:TRX-4 1979 Chevrolet...

Take your X-Truck™ to the next level with this aluminum differential housing. The housing is machined from tough 6061-T6 aluminum for maximum strength and protected with a brilliant anodized finish...

.

Motor mount, 6061-T6 aluminum (blue-anodized)The aluminum motor mount for low-CG 4X4 chassis is precision-machined from solid 6061-T6 alloy for extra rigidity and total power transfer in high-power...

Is it time to upgrade your Slash® with an all-new look? This clipless polycarbonate body features the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body because...

FEATURES: Allows the installation of taller multi-cell batteries INCLUDES: Two Tall Hold Down Retainers

FEATURES: They concentrate the mass for less overall rotational mass than the the stock Jato driveshafts, which results in quicker acceleration The outside U-joint is lubricated and sealed by a...

Camber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1)Accessory part for these models:Bigfoot® No...

Widen the track of your Sledge® with these offset wheel hubs for 9572-series wheels. The set includes four +5 mm hubs and four +10 mm hubs to fine tune the handling of your Sledge. (fits 17 mm...

Rubber wheelie bar tires look great and provide better grip than standard hard plastic wheels. (Fits 7775X wheelie bar wheels)Accessory part for these models:Maxx® Slash®Maxx®Sledge®X-Maxx®...

The X-Maxx LED Light Kit is the only light kit worthy of the X-Maxx name. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough™ for maximum fun. Blaze a...

BATTERY AND CHARGER SOLD SEPARATELY!Includes: 1/10 Scale 4X4 Trail Truck, Fully-Assembled, Waterproof electronics, Ready-To-Drive®, with TQi 2.4GHz 4-channel Radio System, XL-5 HV Speed Control,...

1/16 E-Revo Innovation, Precision, andPerformance With High-Torque Titan 550 Power!QUICK FEATURES ON 1/16 E-REVO (#71054-1)­Ready-To-Race® with included 6-cell NiMH Power Cell battery with iD®2-amp...

1/16 E-Revo Innovation, Precision, andPerformance With High-Torque Titan 550 Power!QUICK FEATURES ON 1/16 E-REVO (#71054-1)­Ready-To-Race® with included 6-cell NiMH Power Cell battery with iD®2-amp...

​ FEATURES Used in the 1/16 scale Traxxas Slash and E-Revo VXL Stick configuration New high current connector with gold-plated copper terminals...

Based on the pro-quality bags our team uses in the field, the Traxxas duffel bag protects your gear and gets you to your destination in style. The main padded compartment accommodates standard 1/8...

A New Level of Crawling CapabilityAdd enhanced crawling capability to your TRX-4M™ with the new High/Low 2-speed transmission. The manually selectable unit adds a low gear option for incredible...

Pro Scale® LED light set, front & rear, complete (includes light harness, zip ties (6)) (fits #9812 body)Add scale lighting to your 1/18 scale TRX-4M™ Ford® F-150® for an extra layer of fun and...

Pro Scale® LED light set, front & rear, complete (includes light harness, zip ties (6)) (fits #9811 body)Add scale lighting to your 1/18 scale TRX-4M™ Chevrolet® K10 for an extra layer of fun and...

Each brass wheel weight adds 31 grams to the lowest part of your TRX-4MT™ for improved anti-rollover stability. Includes 2.5 x 10 mm screws (4). Sold as a pair.Accessory part for these...

9878 Rear (Left or Right) Portal Drive Gear Set for TRX-4M

9877 Front (Left or Right) Portal Drive Gear Set for TRX-4M

9876 Two Speed Transmission Gears for TRX-4M

1.0″ soft tire foam inserts allow you to change the climbing and handling characteristics of your TRX-4M™ tires and account for different vehicle weights. Sold as a pair. Firm foam inserts 9874 also...

1.0″ firm tire foam inserts allow you to change the climbing and handling characteristics of your TRX-4M™ tires and account for different vehicle weights. Sold as a pair. Soft foam inserts 9875 also...

Designed for the TRX-4M™ Long Arm Lift Kit, Mickey Thompson® Baja Pro XS® 2.4x1.0″ tires are taller than standard TRX-4M tires for more ground clearance and an aggressive stance. Tires come...

Designed for the TRX-4M™ Long Arm Lift Kit, Mickey Thompson® Baja Pro XS® 2.4x1.0″ tires are taller than standard TRX-4M tires for more ground clearance and an aggressive stance. Tires come...

Standard on TRX-4M™ High Trail™ Edition trucks, Mickey Thompson® Baja Pro XS® 2.4x1.0″ tires are taller than standard TRX-4M tires for more ground clearance and an aggressive stance. Tires fit...

Pair of 1″ satin chrome slotted mag wheels for TRX-4M™ trucksReplacement part for these models:TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™

Designed for the TRX-4M™ High Trail™ Edition trucks, BFGoodrich® Mud-Terrain™ T/A® KM3 2.4x1.0″ tires are taller than standard TRX-4M tires for more ground clearance and an aggressive stance. Tires...

Add more scale detail to your 9811-series TRX-4M™ K10 and 9812-series TRX-4M™ F-150® bodies with this chrome roll bar with working LED lights.Accessory part for these models:TRX-4MT™ 1/18 1979...

Replacement TRX-4MT™ center skid plateReplacement part for these models:TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster TruckTRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck

Chrome engine detail for TRX-4MT™ BIGFOOT® No. 1. Includes template.Accessory part for these models:TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck

Driveshafts, center, assembled (front & rear) (fits 1/18 scale TRX-4M™ vehicles with 161mm wheelbase) Extended center driveshafts for TRX-4M™ High Trail™ Edition trucks. Does not fit...

The TRX-4M™ Long Arm Lift Kit raises your TRX-4M's center ground clearance over 35% when combined with Mickey Thompson® Baja Pro XS® 2.4x1.0″ tires for more terrain-conquering ground clearance and an...

TRX-4MT™ BIGFOOT® No. 1 chrome front grille and tailgate. Includes tailgate lenses (L&R). (fits 9812-series bodies)Accessory part for these models:TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck

Hardware kit, stainless steel, complete (contains all stainless steel hardware used on 1/18-scale TRX-4M®, TRX-4MT™ Monster Truck & TRX-4M® High Trail Edition®) (includes body hardware and clear...

Replacement front and rear bumper mounts for 9811-series TRX-4M™ K10 bodiesReplacement part for these models:TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster TruckTRX-4M™ 1/18 1979 Chevrolet® K10 High Trail...

Replacement 220 mm steel chassis rails for TRX-4M™ High Trail™ Edition trucks.Does not fit standard TRX-4M.Replacement part for these models:TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail...

Replacement chrome door handles, wipers, and side mirrors for 9811-series TRX-4M™ K10 bodiesReplacement part for these models:TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster TruckTRX-4M™ 1/18 1979...

Replacement chrome door handles, wipers, and side mirrors for 9812-series TRX-4M™ F-150® bodiesReplacement part for these models:TRX-4MT™ 1/18 1979 Ford® F-150® Monster TruckTRX-4M™ 1/18 1979 Ford®...

TRX-4M® High Trail® Edition clipless bodies come ready to mount on your High Trail truck right out of the bag. Constructed out of tough ABS plastic, the Ford® F-150® body faithfully captures all the...

TRX-4M™ High Trail™ Edition clipless bodies come ready to mount on your High Trail truck right out of the bag. Constructed out of tough ABS plastic, the Ford® F-150® body faithfully captures all the...