Traxxas

Bulkhead, rear (lower)/ motor mount washers (steel) (4)/ 4x18mm BCS (4)

Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x15 CS (4)

Shocks, GTR xx-long red-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Shocks, GTR xx-long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Shocks, GTR xx-long orange-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Shocks, GTR long red-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Shocks, GTR long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Shocks, GTR long orange-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Wing, Ford Fiesta® ST Rally (black)/ body posts, rear/ 3x8mm FCS (4) (fits #7412 series bodies)

Slipper clutch, complete (includes slipper clutch hub, clutch pad, spring, 3.0mm NL, 1.5x6mm pin)

Slipper clutch, complete (for Slash 4x4)

Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies...

Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 4-channel (transmitter only)

TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link enabled, TSM® (2-ch transmitter, 5-ch micro receiver)

Motor, 3350Kv, brushless/ mounting plate/ 2x6mm BCS (2)/ 2x4mm BCS (with threadlock) (2) (for #6250 TRX-4M® Brushless Power System)

Rudder mount/ rudder pivot/ 4x14mm BCS (stainless) (4)/ NL 4.0 (2)

U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (10)/ 3x6x0.5 MW (8)) (metal parts for 2 driveshafts)

Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))Fits 5351 pressure plate and hub.

Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

T-Maxx® Torque Control Slipper Upgrade Kit (fits first generation T-Maxx® transmission, w/o Optidrive®) (patent pending)

Servo saver w/ adapters

Replacement gray upper chassis

Replacement black upper chassis

Body, Bigfoot® No. 1, Officially Licensed replica (painted, decals applied) (assembled with body support for clipless mounting)

Suspension arms, orange, front/rear (left & right), heavy duty (2)

Suspension arms, green, front/rear (left & right), heavy duty (2)

Suspension arms, blue, front/rear (left & right), heavy duty (2)

Suspension arms, black, front/rear (left & right), heavy duty (2)

Shock tower (rear)

Shock tower (rear) (for clipless body mounting)

Front and Rear Skid Plates

Front and Rear Skid Plates

Front and Rear Skid Plates

Front and Rear Skid Plates

The 2080R waterproof metal gear servo combines commanding steering authority for 1/16 scale vehicles with the superior durability of all-metal gears for the ultimate driving experience.

Elevate the performance of your Pro Scale® Sand Car with genuine Traxxas aluminum accessories. Carefully machined from tough 6061-T6 aluminum and anodized in brilliant colors, the aluminum brake...

Elevate the performance of your Pro Scale® Sand Car with genuine Traxxas aluminum accessories. Carefully machined from tough 6061-T6 aluminum and anodized in brilliant colors, the aluminum brake...

Elevate the performance of your Pro Scale® Sand Car with genuine Traxxas aluminum accessories. Carefully machined from tough 6061-T6 aluminum and anodized in brilliant colors, the aluminum brake...

Elevate the performance of your Pro Scale® Sand Car with genuine Traxxas aluminum accessories. Carefully machined from tough 6061-T6 aluminum and anodized in brilliant colors, the aluminum brake...

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

Replacement Mini Maxx front upper and lower bulkhead halvesReplacement part for these models:Mini Maxx®

The Mini Maxx ProGraphix body comes fully trimmed and ready to paint with decal sheet, pre-applied overspray film, and clipless body latches with hardware.For best results, use Traxxas ProGraphix...

Is it time to replace your Mini Maxx® body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Mini Maxx bodies come...

Is it time to replace your Mini Maxx® body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Mini Maxx bodies come...

Is it time to replace your Mini Maxx® body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Mini Maxx bodies come...

The clear Mini Maxx body comes fully trimmed and ready to paint with decal sheet, window masking, pre-applied overspray film, and clipless body latches with hardware.For best results, use Traxxas...

Replacement body spacer and clip for the 10423 Slash Late Model unassembled body kit.

This is the Lower Chassis for use with the optional Traxxas #5830 Slash 2WD Low CG Conversion Kit. FEATURES: Plastic constructionFastens under front section of low CG chassis INCLUDES: Lower...

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Give your Mini Maxx or Mini XRT a bold new look with this underbody LED light set. Lights come pre-mounted to replacement nerf bars for easy installation. The light set requires LED light kit...

Give your Mini Maxx or Mini XRT a bold new look with this underbody LED light set. Lights come pre-mounted to replacement nerf bars for easy installation. The light set requires LED light kit...

Give your Mini Maxx or Mini XRT a bold new look with this underbody LED light set. Lights come pre-mounted to replacement nerf bars for easy installation. The light set requires LED light kit...

The Mini Maxx® LED rear bumper incorporates two red LED light bars to enhance rear visibility. This is a standard replacement for the LED rear bumper used in the 10795 Mini Maxx LED Light Kit. Fits...

The Mini Maxx LED light kit is built Traxxas Tough™, with factory fit and finish for easy installation. The kit includes new front and rear bumpers with white forward-facing LEDs, and rear-facing red...

Replacement differential gear set includes output gears (2), output gear shaft, planetary gears (4), planetary gear shafts (4), and differential spacers (2).

The replacement differential comes completely assembled and ready to install. Fits front or rear.Assembled Differential w/ 12-Tooth Ring Gear

Replacement front planetary differential gear set includes 47-tooth ring gear and 12-tooth input gear.

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

Use this rear differential pinion gear when installing the shorter 10757-series center driveshaft along with the optional 10758 slipper clutch or 10760-series center differential in your vehicle...

The 47-tooth center differential spur gear (32-pitch) is made from steel for maximum power handling and durability. The spur gear must be used with optional center differentials 10760 or 10760R...

The 47-tooth differential spur gear (32-pitch) lets you fine-tune the performance of your vehicle. Changing gear ratios can help balance acceleration and top speed for different running conditions...

Replacement composite center driveshaft

Replacement Extreme HD driveshaft assembly comes complete and ready to install. Includes screw pin. Fits front or rear, left or right.

Replacement steel differential drive cup for the 10750X extreme heavy-duty steel CV driveshaft set. Includes screw pin.

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Pair of replacement 61 mm fixed-length toe links come assembled with hollow balls

This easy-to-install kit replaces the standard inner suspension pins your mini with premium hardened-steel pins for maximum strength and durability. Includes 3x45 mm pins (4).

This easy-to-install kit replaces the standard outer suspension pins on your mini with premium hardened-steel pins for maximum strength and durability. Includes 3x34 mm pins (4) with 3x37 mm pins(4).

The replacement suspension screw pin set includes 3x40 mm pins (6), 3x32 mm pins (4), 3x28 mm pins (4), and 3x46 mm pins (2). Fits front or rear.

Add more color to your Mini Maxx® with these replacement steering blocks.Accessory part for these models:Mini Maxx®

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your Mini Maxx™. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your Mini Maxx™. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your Mini Maxx™. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your Mini Maxx™. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with...

Add more color to your Mini Maxx® with these green replacement caster blocks (C-hubs).Accessory part for these models:Mini Maxx®

Replacement Mini Maxx® front suspension arm set. Includes upper arms (2) and lower left and right arms.

Take your Mini Maxx® to the next level with this aluminum battery hold-down. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly anodized finish. Genuine Traxxas...

Replacement front and rear clipless body mount latches for 10711-series Mini Maxx bodies.

With 21 turns of pure copper wire, the Titan® Drift motor delivers smooth, predictable power at any RPM to initiate a slide with the blip of the throttle. An internal fan routes cooling air through...

Wheels, dirt oval, graphite gray, dual profile (2.2” outer, 3.0” inner) (2) (2WD front only)Replacement part for these models:Slash® Late Model BL-2S & Slash® Modified BL-2S

Tires, Hoosier® (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts (2)Replacement part for these models:Slash® Modified

Replacement front and rear clipless body mounts

Give your Traxxas 10350 or 10650 boat trailer even more scale detail with this LED light kit.

Add strength and style to your Maxx® with this aluminum motor cradle. The motor cradle is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine...

Aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry.Accessory part for these models:Maxx®...

Aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry.Accessory part for these models:Maxx®...

Aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry.Accessory part for these models:Maxx®...

Aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry.Accessory part for these models:Maxx®...

Complete Steel-Core driveshaft assembly. Fits front or rear, left or right side. Includes screw pin.

Left and right aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these...

Left and right aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these...

Left and right aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these...

Left and right aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these...