Traxxas

Spool/ differential housing plug/ e-clip

Motor mount plate, TRX-4, 6061-T6 aluminum (blue-anodized)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit

.

.

.

.

Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ screw pin (4)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Wheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray-anodized) (4)/ screw pin (4)Lightweight hex wheel hubs fit with greater precision and look awesome on the axles. Machined from solid 6061-T6...

Weight, portal housing, brass (34 grams) (2)/ 2.5x8 CS (6) (requires #8251X, 8251R, 8251A, or 8251G outer portal housing)Accessory part for these models:TRX-4® 1979 Chevrolet BlazerTRX-4® Equipped...

Caps & spring retainers, GTS shocks (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

Includes :             • X-rings, o-rings, pistons, bushings, e-clips, and rod ends

Shocks, GTS hard-anodized, PTFE-coated aluminum bodies with TiN shafts (assembled with spring retainers) (2)

Shocks, GTS, aluminum (red-anodized) (assembled with spring retainers) (2)

.

Stub axle, extended (portal drive) (2) Replacement part for these models: TRX-4 Ford Bronco

Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (2))

.

Portal housings, outer, 6061-T6 aluminum (red-anodized) (2)/ 2.5x10 CS (12)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical...

Portal housings, outer, 6061-T6 aluminum (green-anodized) (2)/ 2.5x10 CS (12)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical...

Portal housings, outer, 6061-T6 aluminum (charcoal gray-anodized) (2)/ 2.5x10 CS (12)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4...

Slipper eliminator plate Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit ​

Suspension link, rear, 5x109mm (upper or lower) (steel) (2) Replacement part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco

.

.

.

.

.

Servo mount, 2-speed/ servo mount, T-Lock/ wire clipsReplacement part for these models:TRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® 2021 Ford® BroncoTRX-4® Equipped with Traxx®TRX-4®...

.

.

Bumper D-rings, green (front or rear)/ 2.0x12 CS (4)Replacement part for these models:TRX-4® Sport High Trail Edition™

Caster blocks, 6061-T6 aluminum (charcoal gray-anodized), left and rightAccessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit

.

.

.

.

Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x8 BCS (5)/ 2.5x8 CS (2)

Battery plate/ battery strap/ 3x8 flathead screws (4) (requires #8072 inner fenders)

Screw pin, 3x10mm (6)Replacement part for these models:TRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® 2021 Ford® BroncoTRX-4® Equipped with Traxx®TRX-4® Mercedes-Benz® G 500® 4X4²TRX-4®...

.

Bed rails (left & right)/ rail retainers (left & right)/ tailgate cover/ tailgate cover retainer/ 3x10mm CS (4)/ 3x8mm FCS (2) (fits #8187 series bodies)Replacement part for these...

Tires & wheels, assembled, glued (2.2" classic chrome wheels, Canyon Trail 5.3x2.2" tires, foam inserts) (2)/ center caps (front (2), rear (2)) (requires #8255A extended thread stub...

Tires and wheels, assembled, glued (TRX-4 Sport wheels, Canyon Trail 2.2 tires) (2)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4...

Tires and wheels, assembled, glued (1.9" chrome wheels, Canyon Trail 1.9 tires) (2)/ center caps (2)/ decal sheet (requires #8255A extended stub axle) Replacement part for these models: TRX-4 Ford...

Wheels, Method 105 1.9" (charcoal gray, beadlock) (beadlock rings sold separately)

Wheels, Method 105 1.9" (charcoal gray, beadlock) (beadlock rings sold separately)

.

Beadlock rings, satin (2.2") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Sport TRX-4 Tactical Unit

Springs, shock, long (natural finish) (GTS) (0.29 rate, white stripe) (for use with TRX-4® Long Arm Lift Kit)Accessory part for these models:TRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford®...

Rod ends, extended (standard (4), angled (4))/ hollow balls (8) (for use with TRX-4 Long Arm Lift Kit)

.

.

Steering link, 5x117mm (1)/ draglink, 5x60mm (1)/ panhard link, 5x63mm (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit) Accessory part for these...

.

Long Arm Lift Kit, TRX-4, complete (includes red powder coated links, red-anodized shocks) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail...

Long Arm Lift Kit, TRX-4®, completeAccessory part for these models:TRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® 2021 Ford® BroncoTRX-4® Equipped with Traxx®TRX-4® Mercedes-Benz® G 500®...

Push bar, bumper, chrome (assembled) (fits #8137 bumper)Accessory part for these models:TRX-4® 1979 Chevrolet Blazer

Bumper, front (chrome)/ bumper mount/ 3x10 BCS (2)Replacement part for these models:TRX-4 1979 Chevrolet BlazerAccessory part for these models:TRX-4 Mercedes-Benz® G 500® 4X4²

Bumper, rear (chrome)/ bumper mount/ 3x8 BCS (2)Replacement part for these models:TRX-4 1979 Chevrolet BlazerAccessory part for these models:TRX-4 Mercedes-Benz® G 500® 4X4²

Tail lights, left & right (assembled)/ tail light retainers, left & right/ side marker lights (assembled) (2)/ side marker retainers (2)/ mounting tape (2)/ 1.6x5 BCS (self-tapping) (4)/ 2...

.

Traction boards, green/ mounting hardwareAccessory part for these models:TRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® 2021 Ford® BroncoTRX-4® Equipped with Traxx®TRX-4® Mercedes-Benz®...

Expedition rack/ mounting hardware (fits #8111 or #8111R body)Replacement part for these models:TRX-4® Equipped with Traxx™TRX-4® Sport Unassembled KitAccessory part for these models:TRX-4® 1979...

Spare tire mount/ mounting hardwareAccessory part for these models:TRX-4 1979 Chevrolet BlazerTRX-4 Ford BroncoTRX-4 Mercedes-Benz® G 500® 4X4²TRX-4 Scale and Trail CrawlerTRX-4 Sport Unassembled...

.

LED light set, complete with power supply (contains headlights, tail lights, roof light bar, rock lights & distribution block) (fits #8011 body)Accessory part for these models:TRX-4® Scale and...

TRX-4 1969 & 1972 Chevrolet Blazer Pro Scale LED Light SetTRX-4 1969 Chevrolet Blazer Pro Scale Lighting Set (#8090X) Rear View (Close-Up)All the lighting control of a full-scale Blazer is at...

TRX-4 SPORT LIGHT KITSHit the Trail Day or Night with Rock-Solid ReliabilityTRX-4 Sport with Light Kit (#8085, Sold Separately)Genuine Traxxas LED light kits for the TRX-4 Sport are engineered with...

Mirrors, side, chrome (left & right)/ retainers (2)/ body clips (4)

.

.

Axle shaft, front, heavy duty (left & right)/ portal drive input gear (machined) (2) (assembled)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail...

.

.

All the lighting control of a full-scale truck is at your fingertips with the Pro Scale® LED light set for your TRX-4® 1979 Ford® Bronco or F-150® High Trail Edition™. Turn the headlights on and off...

LED lights, power supply (regulated, 3V, 0.5-amp), TRX-4/ 3-in-1 wire harness

Jack (black) (1)/ 2x8 BCS (1) Replacement part for these models: TRX-4 Tactical Unit Accessory part for these models: TRX-4 Scale and Trail Crawler

This special edition orange and black Defender body comes pre-cut, painted with applied decals, and ready to mount on the TRX-4 chassis (324mm). The body is fully assembled with a complement of...

Body, Ford Bronco, complete (black) (includes front and rear bumpers, push bar, rear body mount, grill, side mirrors, door handles, windshield wipers, spare tire mount, red and sunset decals)...

Body, Ford Bronco (1979), complete (clear, trimmed, requires painting) (includes grille, side mirrors, door handles, windshield wipers, spare tire mount, decals, window masks) (requires #8072 inner...

Suspension arms, upper, (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material...

Suspension arms, upper, (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material...

.

Is it time to upgrade your X-Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. X-Maxx bodies come fully-assembled and ready...

Is it time to upgrade your X-Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. X-Maxx bodies come fully-assembled and ready...

Is it time to upgrade your X-Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. X-Maxx bodies come fully-assembled and ready...

.

.

LED lights, light harness (4 clear, 4 red)/ bumpers, front & rear/ wire ties (3) for the 1/16 E-Revo /E-Revo Brushless. (requires power supply #7286)

FEATURES: Hardened steel construction INCLUDES: Two Output Gears Two Spider Gears One Spider Gear Shaft One Carrier Support

Tires, Maxx® 2.8" (2)/ foam inserts (2)Replacement part for these models:Stampede 4X4Accessory part for these models:Bigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially Licensed...

Connector, power tap (with cable)/ 2.6x8 BCS (2) (use #6549 power tap for telemetry voltage)

FEATURES: Rear tires 2.2" Satin Chrome Wheels Off-Road Racing Tires 5 spoke design INCLUDES: Two 2.2" mounted Off-Road Racing Tires, Satin Chrome Wheels Foam Inserts REQUIRES: Installation on...

.

FEATURES: High-grade 7075-T6 Aluminum construction, in a titanium anodized finish make for a chassis 40% stronger than the stock chassis Extra material is milled out of the top of the chassis to make...

FEATURES: Black steel and natural aluminum construction INCLUDES: One Primary Shaft, one One-Way Bearing, one Snap Ring, & one spacer REQUIRES: Installing in gear box

This is the Aluminum Exhaust Header Spring Mount for the Traxxas 2.5, 2.5R and 3.3 Engines. FEATURES Aluminum construction Silver in...

FEATURES: Plastic construction Black in color INCLUDES: One Roll Hoop (Roll Bar) One Transmission Skid REQUIRES: Assembly to vehicle SPECS: Roll Loop height: 121mm (4.76") Transmission Skid length:...

FEATURES: Black rubber construction INCLUDES: One black coupler One black exhaust deflector Two 7" (178mm) zip ties Two 3" (76mm) zip ties REQUIRES: Installing between tuned pipe and exhaust header

.