Traxxas

Chassis brace (T-Bar) (center)Replacement part for these models:Jato® 4X4 Brushless

 Jato® 4X4 Brushless, Body (painted, decals applied)Replacement part for these models:Jato® 4X4 Brushless

 Jato® 4X4 Brushless, Body (painted, decals applied)Replacement part for these models:Jato® 4X4 Brushless

The WideMaxx® half shaft set includes four internal-spline shafts and four external-spline shafts to create four telescoping driveshafts (plastic parts only). Fits front or rear, left or right. Must...

Boost performance and reduce maintenance on your Maxx® or Maxx® Slash® with this stainless steel bearing kit. The bearing kit replaces the standard bearings with high quality stainless steel bearings...

Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4" driveNew Phillips and Straight screwdriver bits are precision-ground from the same premium hardened...

Give your 1/10 scale E-Revo VXL a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your vehicle with stainless steel hardware for...

The mod 1 (1.0 metric pitch) 44-tooth steel spur gear fits the 8980 center differential. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help...

Set of four 17 mm gray-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and...

Left and right aluminum stub axle carriers boost the appearance and strength of your 4-Tec®. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly anodized finish...

Left and right aluminum stub axle carriers boost the appearance and strength of your 4-Tec®. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly anodized finish...

Left and right aluminum stub axle carriers boost the appearance and strength of your 4-Tec®. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly anodized finish...

Rebuild kit for 4-Tec® 2.0 8350X steel CV-driveshafts. Includes pins and O-rings for two axles.

Aluminum Battery Hold-Down Take your 4-Tec® to the next level with this aluminum battery hold-down. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly...

Replacement front chrome bumper for 9830-series TRX-4® F-150® High Trail® edition bodies. Includes bumper mount and 3x10 mm screws (2).Replacement part for these models:TRX-4® Ford® F-150® High Trail...

Rudder (80mm)Replacement part for these models:Disruptor®

Replacement center half-shaft set includes short internal-spline halves (3) and long internal-spline halves (2).Replacement part for these models:TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979 Ford®...

Replacement driveshaft kit for the extended center driveshafts used on the TRX-4® Long Arm Lift Kit. Includes extra-long internal-splined shafts (2), long internal-splined shaft, medium...

Replacement center half shafts. Includes 2 shafts and 4 pin retainers.Replacement part for these models:TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979...

The 27-tooth pinion gear (1.0 metric pitch) is machined from hardened steel for extra durability and fits 5 mm motor shafts. Traxxas pinion gears let you fine-tune the performance of your Traxxas...

The TRX-4M® Brushless Power System gives you up to 50% more speed, more crawling torque, and greater precision than brushed power systems. Rip wheelies in your monster truck or navigate a technical...

The Bandit®® body includes front and rear canopy with wing and decal sheet. From mild to wild, choose your own colors to personalize your body. The detailed graphics are fully painted, but the rest...

Body, Slash® Modified (clear, trimmed, requires painting)/ decal sheetsAccessory part for these models:Slash® Modified

Wheels, TRX-6® Big Rig 2.2" (black chrome) (rear) (2)/ center caps (black chrome) (2)Pair of 2.2" black chrome TRX-6® Big Rig rear wheels with center caps (2)Replacement part for these models:TRX-6®...

Sticky 2.0″ Response tires with Traxxas® logo provide razor-sharp handling and superior grip on pavement with a slick tread design and high-grip rubber compound. Tires come pre-mounted and glued to...

Rear window and engine cover for the 9311-series 4-Tec® 3.0 Chevrolet® Corvette Stingray body with 2.6x8 mm screws (8)Replacement part for these models:Chevrolet® Corvette® Stingray

Molded body accessories for the 9311-series 4-Tec® 3.0 Chevrolet® Corvette Stingray body include tail lights (2), wing, rear vents (2), mounts, 2.6x8 mm screws (2), 1.6x5 mm screws (4), and 1.6x7 mm...

Left and right replica exhaust tips for the 9311-series 4-Tec® 3.0 Chevrolet® Corvette Stingray body with 2.6x8 mm screws (4)Replacement part for these models:Chevrolet® Corvette® Stingray

Rear clipless body latch with replica engine detailing for the 9311-series 4-Tec® 3.0 Chevrolet® Corvette Stingray body.Replacement part for these models:Chevrolet® Corvette® Stingray

Front clipless body latch for the 9311-series 4-Tec® 3.0 Chevrolet® Corvette Stingray bodyReplacement part for these models:Chevrolet® Corvette® Stingray

Replacement left and right rear axle carriers for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x31 mm hinge pins (2) and 3x18 mm screws (2). Parts are compatible with...

Replacement left and right rear axle carriers for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x31 mm hinge pins (2) and 3x18 mm screws (2). Parts are compatible with...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right caster blocks (c-hubs) for 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts...

Replacement left and right caster blocks (c-hubs) for 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts...

Replacement left and right caster blocks (c-hubs) for 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts...

Replacement left and right caster blocks (c-hubs) for 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts...

Replacement left and right caster blocks (c-hubs) for 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts...

Replacement LED headlights with wire harness for 8090 LED light kits. Fits #9112, 9130 & 9131 series bodiesAccessory part for these models:TRX-4

Replacement LED headlights with wire harness for 8035 LED light kits. Fits 8010-series bodiesAccessory part for these models:TRX-4® 1979 Ford® Bronco®

Add some high-impact style to your X-Maxx® with these ready-to-mount wheels and tires. The wheels come pre-assembled and glued to Maxx® AT 8.0″ x 4.0″ tires with foam inserts. Sold as a left and...

Gravel-pattern rally tires offer superior traction on pavement, dirt, gravel, and more with a unique directional tread pattern captured in high-grip rubber. Tires come pre-glued and mounted with foam...

Set of six 3x8 mm cap-head machine screws with hex-drive headsReplacement part for these models:Maxx® Slash®

Wheels, dirt oval, graphite gray, dual profile (2.2” outer, 3.0” inner) (2) (2WD front only)Replacement part for these models:Slash® Modified

Wheel discs (yellow) (4)

Wheel discs (white) (4)

Wheel discs (green) (4)

Wheel discs (gray) (4)

Wing, (black)Replacement part for these models:Slash® Modified

Body cage (front & rear, left & right) (fits #10411 body)Replacement part for these models:Slash® Modified

Body cage, driver/ retainers (3) (fits #10411 body)Replacement part for these models:Slash® Modified

Front and rear body reinforcement set for 10411-series bodiesReplacement part for these models:Slash® Modified

Latch, body mount (front & rear)/ front body support (fits #10411 body)Replacement part for these models:Slash® Modified

Replacement lenses for the 10350 boat trailer. Includes side marker lights and lenses (6) and 2.8 x 8 mm black stainless screws (12).Replacement part for these models:Tandem-Axle Boat...

Support posts, boat trailer (17mm (8), 30mm (8), 35mm (2), 37mm (8), 38mm (2), 40mm (2), 43mm (2), 65mm (4), 70mm (4))/ bunk boards (8)Replacement part for these models:Tandem-Axle Boat Trailer

Replacement top and bottom rear crossmembers with tail light lenses, 1.6x10 mm (8), 3x5 mm (7), and 3x15 mm (6) stainless screws and square nuts (4). Fits 10350 boat trailer.Replacement part for...

Replacement top and bottom front crossmembers with 3x8 mm (7) and 3x15 mm (6) stainless screws and square nuts (4). Fits 10350 boat trailer.Replacement part for these models:Tandem-Axle Boat...

Pair of replacement fenders for the 10350 triple-axle boat trailerReplacement part for these models:Triple-Axle Boat Trailer

Pair of replacement axle carriers for the 10350 boat trailerReplacement part for these models:Tandem-Axle Boat TrailerTriple-Axle Boat Trailer

Boat trailer rebuild kit front includes plastic parts and hardware onlyReplacement part for these models:Tandem-Axle Boat Trailer

Boat trailer rebuild kit front includes plastic parts and hardware onlyReplacement part for these models:Triple-Axle Boat Trailer

Boat trailer hitch with 3x12 black stainless screws (2)Replacement part for these models:Tandem-Axle Boat TrailerTriple-Axle Boat Trailer

Coupler, boat trailer (long (1), short (1))/ 3x10mm BCS (black stainless) (2)/ 3x10mm CS (black stainless) (1)Replacement part for these models:Tandem-Axle Boat Trailer

Trailer hitch with 3x10 mm screws (2)Replacement part for these models:Triple-Axle Boat Trailer

Replacement Spartan SR hatch sealsReplacement part for these models:Spartan® SR

Motor mounts (front & rear) (blue-anodized 6061-T6 aluminum)/ 3x10mm CCS (with threadlock) (4)/ 4x12mm BCS (with threadlock) (2) (for use with #3483 motor)Add strength and style to your Maxx®...

Add strength and style to your Maxx® with this aluminum motor cradle. The motor cradle is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine...

Add strength and style to your Maxx® with this aluminum motor cradle. The motor cradle is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine...

Add strength and style to your Maxx® with this aluminum motor cradle. The motor cradle is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine...

Add strength and style to your Maxx® with this aluminum motor cradle. The motor cradle is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine...

Enhance the steering precision, strength, and looks of your Maxx® Slash® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Enhance the steering precision, strength, and looks of your Maxx® Slash® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Enhance the steering precision, strength, and looks of your Maxx® Slash® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Enhance the steering precision, strength, and looks of your Maxx® Slash® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Enhance the steering precision, strength, and looks of your Maxx® Slash® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Pair of 4.5″ BFGoodrich® All-Terrain T/A® KO2 replica tires come pre-glued and mounted with foam inserts to black chrome Raptor R™ replica wheels. Wheels feature a 2.2″ outer diameter and 3.0″ inner...

Pair of 4.5″ BFGoodrich® All-Terrain T/A® KO2 replica tires come pre-glued and mounted with foam inserts to black chrome Raptor R™ replica wheels. Wheels feature a 2.2″ outer diameter and 3.0″ inner...

Body, 1/16 E-Revo, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetFrom mild to wild, choose your own colors to personalize your 1/16 E-Revo® body. The...

Body, 1/16 E-Revo, red & blue (painted, decals applied)Is it time to upgrade your 1/16 scale E-Revo® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint...

Body, 1/16 E-Revo, blue (painted, decals applied)Is it time to upgrade your 1/16 scale E-Revo® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with...

Body, 1/16 Slash® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetFrom mild to wild, choose your own colors to personalize your body. The detailed...

Body, 1/16 Slash® 4X4, red (painted, decals applied)Is it time to upgrade your 1/16 scale Slash® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with...

Body, 1/16 Slash® 4X4, black (painted, decals applied)Is it time to upgrade your 1/16 scale Slash® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with...

Is it time to upgrade your Slash® with an all-new look? This clipless polycarbonate body features the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body because...

Is it time to upgrade your Slash® with an all-new look? This clipless polycarbonate body features the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body because...

Is it time to upgrade your Slash® with an all-new look? This clipless polycarbonate body features the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body because...

Is it time to upgrade your Slash® with an all-new look? This clipless polycarbonate body features the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body because...

Is it time to upgrade your Slash® with an all-new look? This clipless polycarbonate body features the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body because...

Is it time to upgrade your Slash® with an all-new look? This clipless polycarbonate body features the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body because...

Body, Rustler® 4X4, red (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)Is it time to upgrade your Rustler® 4X4 with an all-new...

Body, Rustler® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ body mounts (front & rear)/ rear body support/ decal sheetFrom mild to wild, choose your own...

Body, Rustler® 4X4, blue (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)Is it time to upgrade your Rustler® 4X4 with an all-new...

Body, Bandit® (also fits Bandit® VXL), red/ wing (painted, decals applied)Is it time to upgrade your Bandit® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix®...

Body, Bandit® (also fits Bandit® VXL), green/ wing (painted, decals applied)Is it time to upgrade your Bandit® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix®...

Body, Slash® Modified, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetsAccessory part for these models:Slash® Modified