Traxxas

Driveshafts, center E-Revo (steel constant-velocity) front (1)/ rear (1) (assembled with inner and outer dust boots, for E-Revo)

Half shafts, center (internal splined (2)/ external splined (2)) (plastic parts only)

Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and...

Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and...

Rebuild kit, driveshaft (cross pin (2)/ 16mm pin (2)) (metal parts for 2 driveshafts)

Rod ends, heavy duty (push rod) (8) (assembled with hollow balls) (replacement ends for #8619, 8619G, 8619R, 8619X)Accessory part for these models:E-Revo® VXL Brushless

Toe links, E-Revo VXL (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (8)/ aluminum wrench, 10mm (1)

.

Skid plate set, front/ skid plate, rear/ 3x10 BCS (6)/ 3x30 BCS (1) (fits #8629 & 8630 bulkheads)

Axle carriers, left & right (1 each) (use with 8x16mm & 17x26mm ball bearings)/ dust boot retainers (4)

Suspension arms, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))Accessory part for these models:E-Revo® VXL Brushless

Suspension arms, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))Accessory part for these models:E-Revo® VXL Brushless

Suspension arms, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Suspension arms, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Suspension arms, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Suspension arms, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Suspension arms front (left), heavy duty (upper (1)/ lower (1))Accessory part for these models:E-Revo® VXL Brushless

Suspension arms front (left), heavy duty (upper (1)/ lower (1))Accessory part for these models:E-Revo® VXL Brushless

Suspension arms, front (left), heavy duty (upper (1)/ lower (1))

Suspension arms, front (right), heavy duty (upper (1)/ lower (1))

Suspension arms, front (right), heavy duty (upper (1)/ lower (1))

Bulkhead, front (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Bulkhead, rear (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Chassis supports, front & rear/ 3x12mm BCS (4)/ 3x15mm CS (4)/ 4x14mm BCS (1)

Push rods, aluminum (red-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)Accessory part for these models:E-Revo® VXL Brushless

Push rods, aluminum (green-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)Accessory part for these models:E-Revo® VXL Brushless

Push rods (steel), heavy duty (2) (assembled with rod ends)Accessory part for these models:E-Revo® VXL Brushless

.

.

Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1)

.

Body reinforcement set (fits #8611 body)Accessory part for these models:E-Revo VXL Brushless

Linkage, sway bar, front (2) (assembled with hollow balls)/ sway bar arm (left & right)

.

.

.

.

.

.Gear set, center differential (output gears (2)/ spider gears (4) Replacement part for these models: Unlimited Desert Racer)

Gear set, differential (front) (output gears (2)/ spider gears (4)) Replacement part for these models: Unlimited Desert Racer)

Carrier, differential (front or center)/ x-ring gaskets (2)/ ring gear gasket/ 14.5x20 TW (2)

.

.

.

.

.

.

Rebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)

Drive cup (1)/ 2.5x10 CS (use only with #8550 driveshaft) Replacement part for these models: Unlimited Desert Racer

Driveshaft, steel constant-velocity (shaft only, 96mm) (1) Replacement part for these models: Unlimited Desert Racer

Suspension pin set (front) (3x51mm (2), 3x54mm (2), 3x93mm (2) Replacement part for these models: Unlimited Desert Racer

.

Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering Replacement part for these models: Unlimited Desert Racer

Suspension link, rear (upper) (steel) (4x206mm, center to center) (2) (assembled with hollow balls)

.

.

Suspension arm, lower right/ arm insert (assembled with hollow ball)

Suspension arms, upper (left & right) (assembled with hollow balls)

.

2-in-1 wire harness, LED lights (high-voltage)Replacement part for these models:Unlimited Desert Racer®Accessory part for these models:Unlimited Desert Racer®

LED light bar, roof (curved, high-voltage) (52 white LEDs (single row), 202mm wide)

LED light bar, front (high-voltage) (52 white LEDs (double row), 100mm wide)

.

.

Shocks, GTR, 139mm, aluminum (red-anodized) (fully assembled w/o springs) (rear, threaded) (2) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 64mm, aluminum (red-anodized) (front, no threads) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 64mm, aluminum (blue-anodized) (front or rear, threaded)  Replacement part for these models: Unlimited Desert Racer

Shocks, GTR, 134mm, aluminum (red-anodized) (fully assembled w/o springs) (front, no threads) (2)

Nuts, 5mm flanged nylon locking (aluminum, red-anodized, serrated) (4) Replacement part for these models: Unlimited Desert Racer

Nuts, 5mm flanged nylon locking (aluminum, black-anodized, serrated) (4) Replacement part for these models: Unlimited Desert Racer

.

Spring, shock, 139mm (natural finish) (GTR) (progressive, 0.937 rate, orange stripe) (2) Accessory part for these models: Unlimited Desert Racer

.

This highly detailed and realistic Cadillac CTS-V body for the 4-Tec 2.0 comes pre-cut, painted with applied decals, and includes a body mount for the 4-Tec 2.0 chassis. The body includes injection...

This highly detailed and realistic Cadillac CTS-V body for the 4-Tec 2.0 comes pre-cut, painted with applied decals, and includes a body mount for the 4-Tec 2.0 chassis. The body includes injection...

Body, Cadillac CTS-V (clear, requires painting)/ decal sheet (includes side mirrors, spoiler, & mounting hardware) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD...

Body, Chevrolet Corvette Z06, blue (painted, decals applied)Accessory part for these models:4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisFord GT®Ford Mustang GT

LED tail light kit (fits #8311 body)

Description: Traxxas Housing, Differential (Front) - TRA8381 This item package consists of the following Traxxas items. Housing, differential (front)   For FORD GT

Description: Traxxas Housing Spool - TRA8379 This item package consists of the following Traxxas items. Housing, spool / spool shaft/ bushing   For FORD GT

Tires and wheels, assembled, glued (split-spoke green wheels, 1.9" Response tires) (front) (2) (VXL rated)

Tires and wheels, assembled, glued (split-spoke orange wheels, 1.9" Response tires) (front) (2) (VXL rated)

Tires and wheels, assembled, glued (split-spoke black chrome wheels, 1.9' Response tires) (front) (2)

Description: Traxxas Brake Calipers (Red) - TRA8367 This item package consists of the following Traxxas items. Brake calipers (red), front (2)/ rear (2)   For FORD GT

Description: Traxxas Spring Shock (Red) (3.325 Rate, Orange Stripe) (2) - TRA8365 This item package consists of the following Traxxas items. Spring, shock (red) (3.325 rate, orange stripe)...

Description: Traxxas Spring Shock (Red) (4.075 Rate, Green Stripe) (2) - TRA8363 This item package consists of the following Traxxas items. Spring, shock (red) (4.075 rate, green stripe)...

.

Description: Traxxas Ultra Shocks (Grey) (Short) (2) - TRA8360 This item package consists of the following Traxxas items. Ultra Shocks (grey) (short) (includes spring pre-load spacers)...

Description: Traxxas Wheel Hubs (4) - TRA8356 This item package consists of the following Traxxas items. Wheel hubs, hex (disc brake rotors) (4)   For FORD GT

Drive cups, inner (2) (steel constant-velocity driveshafts)/ screw pins (2) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford GT® Ford Mustang GT ​

Driveshafts, steel constant-velocity (assembled), rear (2) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford GT® Ford Mustang GT

Description: Traxxas Driveshaft Rear (2) This item package consists of the following Traxxas items. Driveshaft, rear (2)   For FORD GT

.

Turnbuckles, aluminum (blue-anodized), camber links, 32mm (front) (2)/ camber links, 28mm (rear) (2)/ toe links, 34mm (2)/ aluminum wrench Accessory part for these models: 4-Tec 2.0 AWD...

Turnbuckles, aluminum (green-anodized), camber links, 32mm (front) (2)/ camber links, 28mm (rear) (2)/ toe links, 34mm (2)/ aluminum wrench Accessory part for these models: 4-Tec 2.0 AWD...

Mounts, suspension arms, aluminum (blue-anodized) (front & rear)/ hinge pin retainers (12)/ inserts (6) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford...

Mounts, suspension arms, aluminum (green-anodized) (front & rear)/ hinge pin retainers (12)/ inserts (6) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford...

Description: Traxxas Mounts, Suspension Arms This item package consists of the following Traxxas items. Mounts, suspension arms (front & rear) (4)/ hinge pin retainers (2)   For FORD...

Description: Traxxas Caster Blocks This item package consists of the following Traxxas items. Caster blocks (c-hubs) (2)/ kingpin bushings (4)   For FORD GT

Description: Traxxas Bulkhead, Rear This item package consists of the following Traxxas items. Bulkhead, rear   For FORD GT