Athearrn ATHG69518 Canadian National SD75I Web Address Logo #5761 Locomotive HO Scale

NEW FEATURES FOR ALL LOCOMOTIVES IN THIS ANNOUNCEMENT:
All-new LED lighting
Rubber MU hoses for durability

ONT FEATURES:
First time ONT offered with DCC+Sound version, including underframe and pilot detail
First time offered Canadian style snow plow
First time offered Canadian style grated walkways
First time offered Rear rock plow
First time offered #2105 with blue nose stripes
Nathan 3-chime horn
Sinclair antenna
Nose door without window
Cab mirrors
Sunshades
Front & rear ditch lights
All lights illuminated with LEDs
Ontario Northland received its only order of 6, numbered 2000-2006, between May and July, 1999. Built to similar specifications as the Canadian National SD75Is, these units were leased to CN for a period of time in early 2000. ONT #2105 was in a grade crossing accident with a logging truck December 2012. It was out of service for repairs about a year before it was released with a new nose job and blue safety stripes.

UP FEATURES:
Red sill stripe as delivered SD70M Flare
First UP units delivered with the late-style cab
Nose door without window
Nathan 3-chime horn
Cab mirrors
Sunshades
Small EMD style snow plow
Front ditch lights
All lights illuminated with LEDs
In a sea of over 1000 Union Pacific SD70Ms, UP 3971-3973 are unique. These are the only units produced for UP that feature the combination of the later Phase II cab and the earlier 2-panel flared radiators.

CN FEATURES:
CN SD75Is repainted with the web address logo
Nathan K3L horn
Large & small Sinclair antennas
Canadian-style walkway grating
Rear rock plow
Front & rear ditch lights
All lights illuminated by LEDs
EMDX FEATURES:
LED illuminated headlights and strobe ditchlights , effect on DCC+Sound models triggered by horn
LED illuminated strato-light beacon, effect on DCC+Sound models
Leslie S3L air horn
Large & small firecracker antennas
Small EMD style plow per prototype
Large anticlimber
Coupler cut levers with loops
Rear pilot MU hose holder
Dual fuel fillers
EMD demonstrator cab with door on conductor’s side
#7002:
EMD rail lubricator box
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug™ plug-and-play technology with 21-pin connector
MU receptacles and cables per prototype
Front / rear trainline and MU hoses with silver ends
Dual sanding lines
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
New LED Lighting for realistic appearance
Pilot face spare knuckles and brackets per prototype
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Anti-glare panel painted on the nose
Windshield wipers
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Standard or Freight-style brake wheel
See-through radiator fans
Lift rings
Factory installed wire grab irons
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on Code 55 and larger rail
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18”
Recommended radius: 22”
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, & lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of “In Service”equipment; “Tattered and Torn” just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per road number matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
PROTOTYPE HISTORY
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.

Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial” truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steer”, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.

Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M” in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Atchison Topeka and Santa Fe railroad requested a 4300 horsepower version resulting in the SD75M. As production continued, EMD incorporated their new “Whisper Cab” design resulting in the SD75I. The updated cab SD75I was purchased by Santa Fe successor Burlington Northern and Santa Fe, Canadian National, and the Ontario Northland. Having been built only in the mid-1990s, you can still find the entire fleet of SD75Ms and SD75Is in regular service today.
Specifications
DCC: Ready/21-Pin NEM
SOUND: Ready
PROTOTYPE MANUFACTURER: EMD
Axles: 6
LIGHTED: LED Lighting
Minimum Age Recommendation: 14 years
Is Assembly Required: No