Devcon 31345 30-Minute Epoxy 1 oz

Devcon epoxy adhesives cure and join things together by a chemical
reaction between the resin and hardener. This reaction results in
high strength bonds that are resistant to most chemicals.
Use for household, industrial, crafts, or for any job that requires
a high-strength, high-quality bond.
Best used on these materials:
-Metal & Wood
-Concrete
-Glass & China
-Ceramics
-Fiberglass
Clear drying color.
Working time (time available to mix and apply product and position
repair): 30 minutes.
Handling time (the amount of time repair should remain stationary for
product to set): 2 hours.
Full bond strength in eight hours.
PSI strength: 2,500 pounds per square inch.
Waterproof.
It is not flammable.
Working temperature range (once fully cured it can withstand this
temperature range): -60 degrees to +200 degrees fahrenheit.
The exclusive applicator features a patent pending design that makes
it easy to dispense and mix the right amount of adhesive for any
job. The snap off cap eliminates unsafe cutting of the tube ends
while the snap out paddle in the handle makes it easy to mix.
Nozzle design lets even the thickest materials flow easily.
Reseals for storage.
Directions on package.

One Applicator with 30 Minute 2 Ton Epoxy and Hardener

Net Volume: 25ml

Not recommended above 200°F (93°C). If temp is below 60°F (15°C),
the hardening time is considerably longer.