E-flite EFLM1150 Park 300 Brushless Outrunner Motor 1380Kv 2mm Bullet

Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
High-torque, direct-drive alternative to inrunner brushless motors
Ideal for models requiring up to 85 watts of power
Integrated prop saver design
Mount, prop adapter and hardware included
External rotor design with 3.2mm shaft
Low noise level

Needed To Complete
8A–10A Brushless ESC

6–8 Ni-Cd/Ni-MH or 2–3S Li-Po

6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer

Overview
Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g), or models requiring up to 85 watts of power.

Product Specifications
Bushing Or Bearing Bearing
Connector Type 2mm Bullet
Idle Current (Io) .40A @ 8V
Motor Design Outrunner
Motor Type Brushless
Outer Diameter 1.1 in (28mm)
Recommended Prop Range 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
Resistance .33 ohms
RPM/Volt (Kv) 1380
Shaft Diameter 3.17mm (1/8 in)
Voltage 7.2–11.1V