HoBao

HoBao HB-GT2 1/8 Hyper GT2 On-Road Nitro ARR Roller

(No reviews yet) Write a Review
SKU:
HB-GT2
UPC:
4711256702346
Condition:
New
  • HoBao HB-GT2 1/8 Hyper GT2 On-Road Nitro ARR Roller
  • HoBao HB-GT2 1/8 Hyper GT2 On-Road Nitro ARR Roller
  • HoBao HB-GT2 1/8 Hyper GT2 On-Road Nitro ARR Roller
  • HoBao HB-GT2 1/8 Hyper GT2 On-Road Nitro ARR Roller
  • HoBao HB-GT2 1/8 Hyper GT2 On-Road Nitro ARR Roller
  • HoBao HB-GT2 1/8 Hyper GT2 On-Road Nitro ARR Roller
  • HoBao HB-GT2 1/8 Hyper GT2 On-Road Nitro ARR Roller
$419.95

Description

CNC Aluminum 7075 and Hard Anodized Parts :
-. All Turnbuckles/ All Balls/ Pivot Balls /Rear Hubs /Steering Racks
Chassis:
-. 3mm lightweight hard anodized aluminum
-. +5 degrees of caster angle
Rear Suspension Mount length +4mm, Rear Wheel Hubs length +2mm. Offset total +4mm each side, more stable at high speed.
Front Suspension Mount has more holes for lower arms to change the roll centre setup.
Drive:
-. 4WD drivetrain
-. Hardened steel center driveshaft
-. Front and rear hardened steel universal driveshaft
-. 17mm rear wheels hub (Length +2mm)
-. Anti-loose wheel nut
-. Hardened steel drive cup
Differential:
-. Bevel gear type
-. Front differential filled with #500K silicone oil
-. Rear differential filled with #50K silicone oil
-. New anti-leakage differential housing
-. Hardened steel lightweight cup
2 speed transmission :
-. 44T and 48T spur gear (MOD 1, plastic gear)
-. 15T/ 19T 2-Speed pinion gear (MOD 1, hardened steel gear)
Clutch
-. New CNC aluminum clutch shoes
-. 1.1mm clutch springs
Dual Brake and Linkage
35mm Lightweight Flywheel
Adjustable Engine Mount
Optimized Fuel Tank with Filter, Capacity: 150cc
Carbon Fiber Servo Tray and Differential Top Plate
CNC Aluminum Rear Hub
New CNC Aluminum Front Top Plate
Ball Bearing: Full set included
Shock Absorber :
-. Adjustable metal shock absorber
-. Oil-filled 17mm big bore shock with #600 silicone oil and ring nut can be adjusted to change the hardness of spring
-. 4mm diameter shaft
Shock Tower:
-. New 4mm thick CNC aluminum front and rear tower
-. Tower plate with multiple holes for fixing the shock absorbers to change the setup
Suspension:
-. Front and rear adjustable sway bar
-. Front PBS, reinforced composite upper arms and lower arms
-. Front lower with droop screw
-. Adjustable roll centre of front lower arms and front upper arms
Extra Battery Box
Caster: Adjustable
Camber: Adjustable

REQUIREMENTS

3-Channel Radio/Transmitter Set
Engine & Glow Plug
Manifold & Muffler
Tires,Wheels, and Glue for Tire
Body and Paint for body
High-torque Steering Servo
LiPo Batteries
Battery Charger
Batteries for Transmitter
Nitro Fuel
Glow starter building and track equipment

View AllClose