HoBao Racing 1/8 Hyper MTE Sport Plus 4WD Truck 80% Prebuilt w/ Clear Body

Chassis: 0.12" (3mm) thick aluminum, vertical plate truss style,
gun metal gray in color
Drive: Four wheel shaft
Differentials: Two
Battery Holders: Side truss design, molded plastic, adjustable back
and forth to change weight distribution
Shocks: Oil-filled aluminum body
Shock Towers: 0.16" (4mm) thick aluminum
Pinion Gear: Hardened steel Mod1 18 tooth
Spur Gear: Hardened steel 32 tooth
Suspension: Symmetrical front and rear arms, center base roll bar
Caster: Adjustable front and rear, caster/toe-in refers to the
angle of the suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable front and rear, camber refers to the angle of
the tops of the tires from vertical when viewed from front or
behind vehicle
Body: 1/8 scale unpainted extended cab pickup truck body
Bumpers: Plastic
Tires: 7.2" (182mm) diameter, big block tire pattern, 3.77" (94mm)
wide
Wheels: Six spoke, gun metal gray in color, 17mm hex, double lock
dust proof wheel flange hubs
Ball Bearings: Full set, rubber sealed

80% Prebuilt Hyper MT Sport Plus Monster Truck, Tires, Wheels,
Shocks, Body and Instructions

Radio: 2-channel with high-torque steering servo
Motor: 1/8 scale monster truck brushless motor recommended
Electronic Speed Control: Compatible with selected motor, NOTE if
using the Castle Creations Sidewinder ESC & brushless motor
(CSEC0139) recommended in the Accessory guide, a Dean's Male
2-Pin Ultra Plug Connector (WSDM1302) must be soldered to the
battery leads from the ESC and a Star Two to One Adapter
(GPMM3143) used to connect both batteries. Do not use greater than
2S LiPo batteries with this ESC and motor combo.
Batteries: Two 2S with T-plug connector
Battery Charger: To match selected battery
LiPo Charging Bag
AA Batteries: Eight for transmitter
Track and maintenance equipment
Charging bag, building and track equipment