MRC 0001661 3 Pack of 0001651 HO DECODER WITH JST CONNECTOR / ADAPTER

his economical decoder comes equipped with the JST connector as well as the standard NMRA connector for DCC.

• Designed for HO scale
  
• Built-in NMRA DCC plug and 9-pin plug
  
• Maximum current: 1.5 Amp
  
• Programmable for either 2-digit (1-127) or 4-digit (1-9999) addresses
  
• Programmable start voltage
  
• Programmable acceleration rate
  
• Programmable deceleration rate
  
• Programmable speed curve (factory pre-set) 
  
• Programmable top voltage
  
• Programmable 14, 28, or 128 speed steps 
  
• Directional lighting at 0.1 amp rate
  
• Easy setting “Rule 17” lighting, ditch, strobe and Mars lights
  
• 2 accessory functions (ACC1 & ACC2), at 0.1 amp rate
  
• Supports advanced consisting, (CV19)
  
• Supports programming on main
  
• Compatible with NMRA DCC standard
  
• Complies with the Part 15 of FCC
  
• 26.5mm long x 15.0mm wide x 5.0mm high