RC Light RCL112 12 LED Light System for RPM Canisters (3mm, 4/14)

• Brightest LEDs Industry Wide
• Dual Intensity Brake Light Action
• Simple & Easy Installation
• Powers Directly From the RX
• All Mounting Hardware Included
• Fast Body Removal
• Lifetime Warranty on Every LED

This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights! 

Use RCL112 to add 10 3mm white LED lights to RPM Front Bumper Canisters or RPM Narrow Roof Canisters and RPM Roof Canisters, and 2 3mm red LED lights to RPM Tail Light Canisters. EBS switch is included for dual-intensity brake light action, just like a real car. 

Power directly from the RX 

To change LED sizes or colors use 5mm or 3mm LEDs. 

Everything needed for a complete installation is included with every lighting system! 

Included Items: 
Instruction Set 
(1) standard 10 LED controller 
(1) RX Direct2LED 
(1) electronic brake switch 
(1) RX plug 
(4) 4" wire extensions 
(8) 14" wire extensions 
(10) 3mm white LEDs 
(2) 3mm red LEDs 
(12) chrome 3mm LED holders 
(12) 2P connector housings 
(1) 1.25"x0.5" aluminum tape x18 
(1) 3.75"x3" aluminum tape 
(14) zip ties & bases 

Specs: 
SYSTEM CURRENT DRAW (@6V): 240mA 
(A standard servo draws approx. 350mA) 

LED Controller & RX Direct2LED 
INPUT VOLTAGE: 3.6-7.4V [6V Optimal] 
TYP OUTPUT CURRENT (per LED channel): 20-30mA 

Electronic Brake Switch 
INPUT VOLTAGE: 4.8-6.0V 
MAX OUTPUT CURRENT: 120mA 

Blue, Green, White, White Strobe, Red Strobe LEDs 
FORWARD VOLTAGE: 3.2V 
MAX CURRENT: 30mA 

Amber, Red LEDs 
FORWARD VOLTAGE: 1.9V 
MAX CURRENT: 30mA 

*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output. 

*DO NOT look directly into beam.