RC Lights 911 Strobe 14 LED Lights Police System (5mm, 14) : 1:12 to 1:8 Vehicle

Use RCL5024 to install 4 white dual headlight strobes (fully adjustable), 4 blue and 4 red alternating roof strobe lights with single and double flash option, and 2 red dual-intensity electronic brake lights to any 1/12 to 1/8 size R/C car or truck. No extra channels, with included 911STROBE - 14 LED controller. This controller has headlight strobe, roof strobe, and EBS (electronic brake switch) functionality built right in with auxiliary (CH 3) channel input from a two-position switch on the TX.

Powered directly from the RX throttle & auxiliary channels using the included RX Pass-Thru.

To change headlight or tail light colors use 5mm or 3mm LEDs.

Everything needed for a complete installation is included with every lighting system!

Included Items:
Instruction Set
(1) 911STROBE 14 LED controller
(1) RX Pass-Thru
(1) 2-Channel RX Plug
(14) 14" wire extensions
(4) 5mm white headlights
(4) 5mm blue strobe lights
(6) 5mm red brake & strobe lights
(14) chrome 5mm LED holders
(14) standard 5mm LED holders
(14) 2P connector housings
(1) 1.25"x0.5" aluminum tape x18
(1) 3.75"x3" aluminum tape
(16) zip ties & bases

Specs:
SYSTEM CURRENT DRAW (@6V): 80mA with brake lights dim, strobes ON; 100mA with brake lights engaged
(A standard servo draws approx. 350mA)

LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA
DIMENSIONS: 1.65" x 1.0" x 0.25"

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.

*DO NOT look directly into beam.

THIS COMPLETE SYSTEM BUNDLES