RC Lights RCL5316 Navigation & Strobes (5mm, 14", RGW+2WS1RS) : Heli/Air/Boat

Overview

Direct replacement part. Use as replacements for lost or damaged 5mm LEDs.  Combine with wire extensions to add additional LEDs to any system.  Use to swap with any color or size LED included with any complete system.

Includes:
(2) 5mm LEDs of selected color
(2) standard 5mm LED holders

Specs:
Constant Colors: Blue (RCL5290B), Amber (RCL5290A), Green (RCL5290G), White (RCL5290W), Red (RCL5290R)
Strobe Colors: White (RCL5291W), Red (RCL5291R)

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

MOUNTING HOLE SIZE: 1/4"
OR Use a body reamer to little-by-little make each hole bigger until a snug fit is achieved.

DIY HOBBYISTS: If connecting LEDs directly to power a current limiting resistor must be installed on each LED or it will blow and void the warranty. (160 ohm @ 6V)

*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.

*DO NOT look directly into beam.