TCS 1335 DP5 5-Function BEMF Decoder for Atlas Silver Series HO Scale Locomotives

The DP5 is a HO-Scale direct-plug decoder designed for engines equipped with 8-pin NMRA sockets. By far one of the easiest decoders to install, the DP5 can be plugged into many locomotives with no effort. The DP5 has 5 available lighting functions, and has been tailored to work with Atlas Silver Series engines. This decoder will also fit many other engines with 8-pin NMRA sockets, including KATO and Athearn where additional lighting functions are needed. An excellent choice for engines with ditch lights!

 

Back EMF Load Compensation: Provides superior slow speed control and high performance under load.
 

Quiet Drive: Super-quiet motor control for "buzz" free motor performance.
 

DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
 

RailCom®: This feature allows the decoder to talk to the command station. RailCom supports expansion for new features.
 

Variable Momentum: Allows you to make custom acceleration and deceleration curves.
 

Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs.
 

Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder.
 

Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects!
 

Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs.
 

Decoder Lock: Feature which prevents accidental/unwanted programming while activated.
 

Airwire™ Compatible: Fully compatible with Airwire™ operation.
 

User-Loadable Speed Tables: Configure custom speed curves and set speed limits.

SPECS:

Interface Type: Direct-Plug (8-Pin NMRA)

 

Dimensions (L x W x H): 0.509" x 0.636" x 0.104" or 12.92mm x 16.15mm x 2.64mm

 

Scale: HO Scale

 

Continuous/Peak: 1.0/2.0 Amp

 

Total Functions: 5

 

Function Rating: 80 mA

 

12V Outputs: 5