Tekno RC 1/10 SCT410.3 Short Course Truck EP 4WD Kit TKR5507

All set for short course supremacy!

• 0.16" (4 mm) thick black anodized, CNC aluminum chassis with short front and rear overhang for improved jumping and handling; adjustable chassis braces provide fine-tuning flex.
• Tapered, four wheel aluminum shaft drive with CVDs and captured pins.
• 16 mm anodized Big Bore oil shocks with conical piston design for various compression and rebound rates, plus 4 mm diameter steel shafts.
• 0.16" (4 mm) CNC aluminum shock towers.
• Adjustable long travel suspension with ultra-tough arms and front/rear sway bars.
• Ball bearing-supported steering with narrow pivot posts, adjustable bump steer and Ackerman.

• Bevel gear differentials with 1-piece composite diff cross pin.
• Front/rear bumpers.
• Low-CG lightened motor mount.
• Angled rear gearbox with large bearings.
• Lightened outdrives and couplers.
• M5 stub axles.
• Lightened metal clamping 12 mm hexes.
• Adjustable stops on spindles for more precise steering control.
• 2" x 5.8" (50 mm x 148 mm) battery tray.
• Adjustable toe-in/camber.

New features and improvements over the SCT410 include;
Smoother Diff Gears & 1-pc Composite Diff Cross Pin
Tapered Aluminum Driveshaft
Lightened Outdrives & Couplers
Angled Rear Gearbox w/Larger Bearings
Reduced Height Shock Towers
V2 Hinge Pin Brace for More Adjustability
More Durable Suspension Arms
Longer Rear Sway Bar
Standard Droop Adjustment Screws
LCG Lightened Motor Mount
M5 Stub Axles
Lightened Metal Clamping 12mm Hexes
Adjustable Stops on Spindles for more Precise Steering Control

Chassis: CNC aluminum 0.16" (4mm) thick, anodized black in color
with short front and rear overhang for better bump handling and
jump landing, adjustable front, center, and rear chassis braces for
fine tuning flex
Drive: Four wheel aluminum shaft drive with CVDs with captured
pins
Motor Mount: LCG lightened
Differentials: Bevel gear
Bumpers: Front and rear
Shocks: Oil-filled 16mm bore hard anodized with conical piston design
for varied compression and rebound rates, 4mm diameter steel shafts
Shock Towers: CNC aluminum 0.16" (4mm) thick
Suspension: Adjustable long travel design with adjustable length rear
arms, and adjustable front arm sweep and angle, front and rear sway
bars
Steering: Ball bearing supported, narrow pivot posts, adjustable
bump-steer and Ackerman, Ackerman describes the effect of the
inside front wheel turning faster than the outside front wheel
during turns
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Battery Tray: 2.0x5.8" (50x148mm)

SCT410.3 4x4 Kit with Shocks, Shock and Diff Oil, Decals and
Instructions

Radio: 2-channel with high torque steering servo
Motor: Short course brushless
Pinion Gear: 11-30 tooth Tekno RC MOD1 TKR4171-TKR4190 recommended
OR Tekno RC Traktion Drive/Electri-Clutch System
Electronic Speed Control: Compatible with selected motor
Battery: 2S LiPo
Battery Charger: Compatible with selected battery
Body: 1/10 scale short course
Wheels: Short course type with 12mm hex
Tires: Short course
Building and track equipment

Length: 20.87" (530mm)
Width: 11.65" (296mm)
Wheelbase: 12.7-13.2" (323-335mm)
Weight: 6.6lbs (3000g) ready to run, approximately
Differential Ratio: F/R 10-40t, center 44t